Search: High Pressure Paint Fluid Ball Valve

Service Kit for remote control valve

• 2123-007-99
• Service Kit for the 1 1/4″ (32mm) and 1 1/2″ (38mm) Auto Air Valve

ONLINE SHOP LAUNCH OFFER: BUY ONE GRACO XTR7 SPRAY GUN AND GET A FREE AIRLESS WHIP HOSE! Added automatically to the cart.

Experience the Graco XTR+ Airless Paint Spray Guns, offering two pressure ratings, lightweight design, and exceptional spray patterns.

• Pressure options:
  • XTR5+, rated for 5000 PSI
  • XTR7+, rated for 7250 PSI
• Design options:
  • Oval or round handles
  • Two or four-finger triggers
• Package options:
  • No tip
  • Flat tip
  • XHD RAC Switch tip

• OEM Replacement Urethane Sleeve suit Thompson® Valve I
• Urethane composition means it’s high-wear in normal applications, but sometimes the only option for a recycled abrasive or super fine abrasive
• Schmidt® / Axxiom part # is 2149-100-13

• 600mm long, 13mm diameter shaft
• Suits a 20 Litre pail
• Operates at 200-900 rpm
• Spiral-ring mixing head
• Painted steel construction for strength

• Suits Standard Aluminum and Brass Blast Hose Couplings
• High Pressure Version which lasts longer and withstands higher pressures
• Recommended when blasting with pressures over 120psi
• Single Lipped High Pressure Urethane
• 1-¼ (32mm) Bore Size
• Sold as a pack of 10

• 10.0 cu ft Blast pot
• Manufactured by Schmidt to BlastOne unique specifications
• Single outlet Thompson Valve II abrasive metering valve
• Approx 670 kg garnet abrasive capacity
• Comes with pnuematic deadman handle and 20m of control hose
• Excellent for a blastroom application with 1-2 blasters
• Meets all Australian Standards

• Multi-purpose inline ball valve
• Plated brass corrosion-resistant body
• Full bore design for maximum airflow
• Rated for use up to 600 psi
• Female NPT threaded ports
• Sold individually

Adapts a contractor thread nozzle to a wet blasting nozzle.  More control than with a halo nozzle.

• Injects water internally into the abrasive / air stream
• Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
• Includes needle valve to optimize mixture
• Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow

• OEM Replacement Plunger Seal for MicroValve™ 1 / Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-06

• OEM Replacement Plunger suits Thompson® Valve I
• Wear surface is made of Tungsten Carbide for increased life
• Schmidt® / Axxiom part # is 2149-000-07

• OEM Replacement Sleeve for Thompson® Valve I
• Tungsten Carbide construction means you get significantly improved wear life
• Not suited to superfine medias, or abrasive being recycled without a proper recycler – suggest Urethane Sleeve (GV214910013)
• Schmidt® / Axxiom part # 2149-000-13

Multi-purpose relief valves
Male threaded ports
Use on Blast Pots, or other Pressure Vessels including Airpigs distribution manifold, Air Receivers, and AirPreps

• Comes in pack of 10 hoods
• Comfortable elastic stretch fabric
• Conforms to head contours
• Can be worn three ways (over nose, under nose, under chin)
• Close fitting design, ideal for wearing underneath a blast helmet or spray hood

Specifically designed for 32mm to 38mm valves, part number 2123-007-21 guarantees a perfect fit and reliable operation.

• Perfect Fit for 32mm to 38mm Auto Air Valves
• Genuine Axxiom Part: 2123-007-21

• Genuine OEM Replacement Parts Kit (Seals Only) for MicroValve 3
• Sized at 1-1/4 x 1-1/2” (32 x 38mm), ideal for MicroValve 3 abrasive metering valve
• Included plunger seal to prevent abrasive media from leaking
• Polyurethane sleeve for protecting the plunger against wear and tear
• Included O-ring to effectively seal the valve and prevent leaks
• Ball seat for managing the flow of abrasive media
• Economical solution to prolong the lifespan of your MicroValve 3

Schmidt changed the abrasive blasting industry when they introduced the MicroValve™.  Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®.  

It features:

• Simple threaded screw-type metering
• Hardened steel threaded base nipple
• (The brass threaded coupling shown is available separately.)
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• 2123-006-99
• Service Kit for the 1″ (25mm) Auto Air Valve.

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

• For testing air pressure at the nozzle
• Test kit includes:
  • Liquid filled stainless steel pressure gauge with dual pressure & efficiency scale
  • Four needles and instructions
• Protective leather bound case

The Graco XHF Top Feed Airless Spray Gun is specifically designed to effectively spray high-viscosity paint and coatings. This makes it an ideal tool for professionals in industries such as automotive, construction, and manufacturing.

One of the standout features of the XHF Top Feed Gun is its ease of maintenance. Graco has designed this spray gun with convenience in mind, ensuring that users can easily clean and maintain the gun without any hassle. This not only saves time but also ensures that the gun remains in optimal working condition for longer periods of time.

In addition to its maintenance-friendly design, the XHF Top Feed Gun is also known for its ruggedness and reliability. Graco has engineered this spray gun to withstand the demands of heavy-duty usage, making it a durable and long-lasting tool for professionals. This reliability is especially crucial in industries where downtime can result in significant financial losses.
Furthermore, the XHF Top Feed Gun is equipped with advanced technology that ensures consistent spray patterns and high-quality finishes. This allows professionals to achieve precise and uniform coatings, enhancing the overall efficiency and effectiveness of their work.

Overall, the Graco XHF Top Feed Airless Spray Gun is a top-of-the-line tool that offers professionals the ability to efficiently and effectively spray high-viscosity paint and coatings. With its easy maintenance, ruggedness, and reliability, this spray gun is a trusted choice for professionals in a wide range of industries.

Experience efficient painting with the Star Air Paint Spray Gun (SKU: P-SMXS770). An economical choice that’s lightweight, compact, and available in multiple fluid setup sizes.

• Low price, economy spray gun
• Lightweight and compact
• Available in fluid setup sizes 0.059″ (1.5 mm), 0.070″ (1.8 mm), 0.079″ (2.0 mm), 0.098″ (2.5 mm), 0.118″ (3.0 mm)

The Brass Nut and Tails Female Pipe Coupling (FP x FP) is a high-quality machined brass fitting designed for hydraulic and pneumatic systems. Manufactured to meet SAE J530 and J531 standards, this pipe coupling can handle pressures up to 1,000 PSI and temperatures ranging from -54°C to +121°C. It’s ideal for industrial applications requiring durable, leak-proof connections.

Main Product Features: 

• Solid machined brass construction for enhanced durability
• Female pipe coupling (FP x FP) design
• Performs to SAE J530 and J531 standards Working pressure: 1,000 PSI; Burst pressure: 4,000 PSI
• Temperature range: -54°C to +121°C
• Compatible with hydraulic and pneumatic systems
• Ideal for high-pressure applications in fluid transfer

The industry-proven Schmidt TeraValve™ XL metering valve is revolutionary in its ability to provide high performance abrasive metering while boasting an enhanced service life.

• Durable.  The XL (extended life) technology offers more durability – even when blasting with aggressive media like aluminum oxide or steel grit.
• Convenient.  No special modifications are required to swap an older pressure-hold valve (like the Thompson) to a Tera. Even older pressure-release pots can be upgraded with a TeraValve Retrofit Kit, as long as there is at least 6″ clearance from the bottom of the pot.
• Preferred.  BlastOne provides the Tera Valve as standard equipment on all new blast equipment.  In addition, we use them in our own rental fleet.

• Ideal for sandblasting new steel garnet blasting sand to remove milscale
• #80 grain size
• Will achieve a 40-60 micron profile
• Typical consumption rate 250 kg/hr
• Typical blasting rate for Milscale removal 20 m²/hr
• Inert, natural mineral
• Pinkish to reddish-brown, sub-rounded grains
• High performance, low dust garnet abrasive
• Economical, single use abrasive which may also be recycled

• Suits Warrior 4000 Air Motor
• Repair Kit for rebuilding Air Valve
• Kit Includes:
  • Carriage – O-Ring
  • Air Valve – Cup, Plate, Gasket and 2x O-Rings
  • Nylon Ball Check – O-Ring
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

BlastOne has replacement parts for all Axxiom / Schmidt metering valves.  This group includes the various sizes of pipe nipples, at the bottom of the base.

• 19mm x 19mm (¾” x ¾”) (Axxiom part #: 2130-005-12)
• 25mm x 32mm (1″ x 1-¼”) (Axxiom part #: 2130-006-12)
•  32mm x  32mm (1-¼” x 1-¼”) (Axxiom part #: 2130-007-12)
• 38mm x 38mm (1-½” x 1-½”) (Axxiom part #: 2130-008-12)
• NEW – 51mm x 51mm (2″ x 2″) (Axxiom part #: 2130-009-12F), offers maximum flow for high volume applications, such as VertiDrive robot.
• Base of Hardened Steel for extended usability
• Genuine Schmidt® Product

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Used to make a dedicated painting area
• Compact design providing better airflow
• 1.0mm thick galvanised sheet metal work area
• Modular design, Simple screw-together construction
• 12 month warranty

Introducing the UltraFlex Twin Paint Spray Hose & Air Line Hose Sets (SKU: P-GR299). Enjoy tangle-free operations with this joint air & paint fluid hose. Rated for high pressures, available in standard lengths or made-to-order.

• Ultra flexible – easy to handle
• 200 psi air pressure rated, 85 psi fluid pressure rated
• Color coded Siamese hose
• Solvent compatible fluid hose liner
• Coupled with paint, ¼” air fittings
• Standard 25 ft (7.5 m) or 50 ft (15 m) lengths
• Hose also available in made-to-order lengths and bulk – Call us!

• Replacement filter drain valve for the RPB Radex Breathing Airline Filter (P-APF3)
• Made of brass
• Sold individually

Discover the ProPaint Economy Pressure Pot (SKU: P-SMPA10) – a cost-effective solution for occasional use with a 2.5-gallon capacity, suitable for waterborne compositions.

• 2.5 gal (10 liter) Capacity
• Standard and agitated setups
• Waterborne compatible versions
• Other sizes and brands are available

• 2152-000-10 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Replacement Urethane Seat for Thompson Valve 2 when using a Tungsten Carbide Plunger

• Will transform your blast pot into a pressure hold system
• Retrofit Kit includes:
  • Thompson Valve Series II with TC Sleeve
  • Full pusherline kit
  • Automatic air valve and all interconnecting hoses
  • Control line strainer and pneumatic control valve
• Response pneumatic deadman handle and Twinline

Upgrade your Radex airline filter with the precision-engineered “RPB Radex Air Pressure Gauge.” Made with top-notch specifications to ensure reliable and consistent performance:

• Specifically designed as a Radex airline filter component
• Compact 40mm design for a perfect fit
• Optimized to measure up to 145psi
• Features a 1/8″ fitting for versatility
• Ideal replacement for part APF3013
• Official RPB part (001-00126) ensuring quality and compatibility

Choose the RPB Radex Air Pressure Gauge for dependable measurements and longevity in your airline filtering system.

• Combo Valve
• Combines inlet and exhaust valve functions
• Full-ported, 1¼ (32 mm) thread, inlet side
• Pneumatic operation requires 60psi to close exhaust valve
• Rugged, compact design
• Simple to install and service

• 2123-009-99
• Service Kit for the 1 1/2″ (38mm) High flow and 2″ (50mm) Auto Air Valve

• OEM Replacement O-Ring for Thompson® Valve I
• Sits on the bottom of the Insert beneath the Tungsten Carbide Sleeve
• Schmidt® / Axxiom part # 2149-000-18

• Compatible: Graco Triton 4000 and Graco Triton 310
• Ball Check Repair Kit

• Perfect Blend of Garnet Abrasive blasting media for coating removal projects
• Will acheive a 60-100 micron profile
• Typical consumption rate 320 kg/hr
• Typical blasting rate for coating removal 15-20 m²/hr
• Inert, natural mineral
• Pinkish to reddish-brown, sub-rounded grains
• High performance, low dust abrasive media
• Economical, single use abrasive which may also be recycled

Protect your hands with the Solvent Resistant Painting Gloves (SKU: P-NA703). Specifically designed for solvent handling, these lightweight gloves offer cut resistance and come in various sizes.

• Ideal for handling solvent
• Lightweight cut resistant EN388 rating 1
• Flock-lined and extremely versatile
• Sizes 6 (XS)  thru 11(XXL) available 

• OEM Rebuild Kit for TeraValve™ XL
• Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
• Schmidt® / Axxiom part # 2130-000-99
• Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010

• Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
• Used when an overhead hopper automatically feeds abrasive into a blast machine.
• Rugged stainless steel body, compact, isolated 2-bolt construction.
• Doubles blast machine refill cycle time.
• Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
• Set and forget – flow rates stay set where you put them.
• High wear, rugged plunger seal.
• Stainless steel body for long life.
• Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
• Fit a rebuild kit while the valve is still fitted to the blast machine.
• Sold individually.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

The Breather Vent is an essential component designed to prevent dust from entering the piston/cylinder top of the Thompson Valve II Metering Valve. Available in 1/8” NPT or 1/4″ NPT, this bronze silencer, brass strainer, and breather vent serves as an alternative replacement to Schmidt® 2152-000-17, or GV215200017. Sold individually, this Breather Vent ensures your system’s longevity and optimal performance by maintaining a clean operating environment.

• Suits Thompson® Valve II Metering Valve
• 1/8” NPT or 1/4″ NPT – Bronze Silencer / Brass Strainer / Breather Vent
• An alternative replacement to Schmidt® 2152-000-17, or GV215200017
• Used to keep dust out of the piston/cylinder top of the Thompson valve
• Sold Individually

*Most Popular Blast Pot*

• Manufactured by Schmidt to BlastOne specifications
• Valving system designed to have a maximum of 3psi pressure drop
• Specified Capacity (approx)
  • 6.5 cu ft / 185 litres
• Abrasive Capacity (approx)
  • Garnet – 430 kg
  • Steel Grit – 700 kg
• Pressure Rating: 150psi
• Includes: Moisture separator and inlet fitting

• Suits Warrior 4000 Conventional Sprayer
• Diaphragm Repair Kit
• Long Lasting, high quality parts
  • 2 Diaphragms
  • 4 nylon check ball seats
• Sold as a Kit

For industrial conventional painting applications, BlastOne stocks both OEM Graco and aftermarket hoses.  All configurations available.

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 2 to 4 inch fan width (XHD1 series).  All other Graco XHD tip sizes are also available.
• In this group, the orifice sizes range from .007 to .039 inches (sizes 107 to 139)
• Ideal for use with industrial high solids and heavy duty coatings
• Heavy-duty carbide tip construction
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

• Comes in pack of 10 hoods
• Keeps the dust and overspray out of your hair
• Low cost, disposable design
• Elastic face opening
• Calico fabric

The “Standard Claw and Bore Metal Coupling Gaskets MRL” (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.

• Single Lipped MRL Rubber, Compatible: Standard Claw Metallic Couplings, 1-¼ (32mm) Bore Size, Pack 10
• Work great with blasting systems that blast at pressure over 80psi

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This7250 PSI Airless Spray Tip group has 8 to 10 inch fan width (XHD4 series).
• In this group, the orifice sizes range from .009 to .081 inches (sizes 409 to 481)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 6 to 8 inch fan width (XHD3 series).
• In this group, the orifice sizes range from .007 to .055 inches (sizes 307 to 355).
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 4 to 6 inch fan width (XHD2 series).
• In this group, the orifice sizes range from .009 to .039 inches (sizes 209 to 239)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 10 to 12 inch fan width (XHD5 series).
• In this group, the orifice sizes range from .009 to .075 inches (sizes 509 to 575)
• Designed to be used with the Graco XHD Tip Guard

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 18 to 20 inch fan width (XHD9 series).
• In this group, the orifice sizes range from .023 to .039 (sizes 923 to 939)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 12 to 14 inch fan width (XHD6 series).
• In this group, the orifice sizes range from .009 to .075 inches (sizes 609 to 675)
• Designed to be used with the Graco XHD Tip Guard

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 14 to 16 inch fan width (XHD7 series).
• In this group, the orifice sizes range from .011 to .071 (sizes 711 to 771)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 16 to 18 inch fan width (XHD8 series).
• In this group, the orifice sizes range from .013 to .067 inches (sizes 813 to 867)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

• Repair Kit for Thompson Valve 2
• Complete Repair Kit for Thompson Valve 2
• Includes the Tungsten Carbide Plunger
• Schmidt abrasive blasting/Axxiom Manufacturing part number 2152-000-99

• Schmidt part number 2152-000-98
• Replacement Seals Kit for the Thompson Valve 2
• Does not include the Tungsten Carbide Plunger
• Seals Only

• Suits RAC 5 or RAC V Spray Tip
• Used to Seal between the Spray Gun and the Tip Orifice
• 4050psi Rated
• Sold as a pack of 5
• Genuine Parts – Manufactured by Graco

AVAILABLE FOR RENT OR PURCHASE

A Graco King Paint Sprayer Pump will easily spray:

• Medium to Ultra-high viscosity coatings
• Plural component coatings
• High build, high solids epoxy primers and coatings
• High build, high solids Polyurethane top coatings
• Waterborne coatings
• Fire retardant coatings
• Approved for hazardous locations

• The original Thompson® Valve invented by Bob Schmidt
• Suits a pressure hold system, which retains the pressure in the blast pot, until the deadman handle is depressed
• Meters the flow of blasting grit, garnet abrasive sand
• 3 Nipple size configurations:
  • 1 ¼ (32 mm) x 1 ¼ (32 mm)
  • 1 ½” (38 mm) x 1 ½” (38 mm)
  • 2″ (50 mm) x 2″ (50 mm)
• Threaded-plunger metering design with air actuated operation
• The Thompson® Valve is suitable for use with all approved blasting abrasives
• Fits most sand blast hoppers, blast pots or abrasive blasting machines
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

• Kit is designed to replace the Dual inlet/outlet valve systems
• Retrofit Kit includes:
  • 1 -¼ (32 mm) Combo Valve with blowdown hose
  • Response deadman control handle and twinline hose
  • All fittings needed
• Note: Does not include the Pusher Line Kit or MicroValve – order separately

• 40,000 PSI pressure rated
• 38 litre/minute flow rate
• Diesel Powered, Skid-Mounted
• 300 litre fuel tank
• Supplied with UHP hoses and 2 x Rotating Lance
• Manufacturered by NLB Corp

VLP-24 MagnaValve, 200-1000 Lbs flow rate, no sensor, 2.5″ high 24 Vdc

• 35,000 PSI pressure
• 32 LPM displacement
• Skid-Mounted
• Isuzu 4HK1 diesel engine
• Mounted in sound attenuated enclosure (70dB @ 7M)
• Supplied with hose and gun
• Manufactured by NLB Corp
• Available for sale or hire

• Full face, Airfed Painting Respirator
• Tychem QC Tyvek Hood is very simple to replace
• Bump Cap or Hard Hat options available
• Large viewing window with exceptional downward and peripheral vision, has the ability to add a light to give extra visibility
• Soft, breathable inner-bib and extra tuck-in collar
• Can use with optional ear muffs
• Choose your Air conditioner type
  • Constant airflow valve – no cooling
  • C40 will heat or cool the hood used with a breathing airline
  • PAPR is a portable belt mounted powered air unit
• Genuine Parts – Manufactured by RPB Safety

• Rated for 15,000 psi
• 13 GPM (49 LPM)
• Trailer-Mounted
• CAT Diesel Powered
• Supplied with 20M HP hose and gun
• Manufactured by NLB Corp

• Rated for 15,000 psi
• 13 GPM (49 LPM)
• Skid-Mounted
• CAT Diesel Powered
• Supplied with 20M HP hose and gun
• Manufactured by NLB Corp

BlastOne UBD24M-50C HP Water Blast unit rated for operation at up to 350 bar/5,000 psi, 21 LPM.

Includes the following features:

• Kohler 24HP Diesel Engine
• Hawk HP Triplex Pump
• Heavy duty Hose Reel
• Stainless Water Header Tank with low level shut down
• Heavy duty industrial water filter assembly
• Large Fuel Tank
• HP 400 Bar Cleaning Gun and Lance with fan nozzle
• 20M HP Hose Assembly

• Incorporates abrasive shut-off ball valve and barrel union disconnector
• Suits 1 1/4″ (32 mm) threaded valves and pots
• Requires approximately 6″ (150 mm) extra clearance beneath the pot outlet
• Use thread sealant tape or compound to ensure an airtight connection

The leading GVS Elipse Integra dust masks are now available for working with paint!

• Certified to AS/NZS 1716:2012
• A1-P2 filters
• Full eye and respiratory tract protection
• Eye shield is anti-fog, anti-scratch and high velocity impact resistant
• GVS Half Mask are some of the worlds most comfortable masks
• Extremely lightweight
• Hypoallergenic
• Snug-Fit design provides an enhanced comfort to the breather
• P2 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
• The high breathing flowrate design reduces the risk of fatigue
• Filters are installed and mask comes ready to use
• Medium/Large size suits 80% of workers

The leading GVS Elipse dust masks are now available for working with paint!

• Certified to AS/NZS 1716:2012
• A1-P2 filters
• GVS Half Mask are some of the worlds most comfortable masks
• Extremely lightweight
• Hypoallergenic
• Snug-Fit design provides an enhanced comfort to the breather
• P2 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
• The high breathing flowrate design reduces risk of fatigue
• Filters are installed and mask comes ready to use
• Medium/Large size suits 80% of workers

Blast pot pop-up valve

• 2100-010
• Shaft and Pop-Up Valve
• Very long lasting, hemispherical design seals at any angle – less chance of mis-alignment
• Manufactured from Ultra-Tuff Polyurethane
• Suited to 3.5-20 cu.ft S-Series Blast Pots

• Leading Graco spray technology
• aka – King High Flow Sprayer
• 10,000 13inch Air Motor
• Ideal for large jobs that require a high-output sprayer
• Configured with the Graco XL air motor – the largest air motor Graco has ever built
• Handles the workload equivalent of multiple sprayers
• Includes: Integrated filter, heavy duty cart, air kit, siphon kit and hose/gun kit

• Replacement Lower with Build-in Filter
• Retrofit an Xtreme pump lower to an existing old-style King or Bulldog air motor
• Improved performance especially with higher pressures 45:1 56:1 68:1 80:1 ratios
• Reduced solvent usage quicker and easier to flush
• Extended life component
• Fast, simplified servicing with quick knockdown intake valve and cylinder

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 15cm Long and about 2.5cm round
• Use with a Filter Support which is inserted into the middle of the Filter
• #60 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

The “Testex Surface Profile Dial Thickness Gauge Microns” (SKU: INE1124M) offers accurate measurement of surface profiles on Testex replica tape. Compliant with ISO8503-5, AS3894-5, and AS1627-4 standards, this gauge kit ensures precision in every paint inspection.

• Used to measure the maximum surface profile produces on the Testex replica tape
• Kit includes
  • Dial thickness gage for microns
  • Burnishing tool
• Used in accordance with ISO8503-5, AS3894-5 and AS1627-4 Standards

• OEM replacement Roll Pin for the MicroValve® 1.
• Holds the Knob to the Plunger
• Axxiom / Schmidt® part # is 2125-000-04.

MOBILE DUST COLLECTOR FOR ABRASIVE BLASTING PROJECTS

• Available to Buy or Hire
• Ready availability all over Australia/New Zealand
• Diesel Powered, Optional to include Electric
• Come either Trailer Mounted or Skid Mounted
• Industry Leading Design
• Read our Dust Collector Buying Guide
• Used for Dust control while Sandblasting
• Most common sizes: 6,000cfm, 12,000cfm, 20,000cfm or 40,000cfm
• Portable dust extractor for site work
• Onsite Dust Collectors & Onsite Dust Ventilation
• Industrial Portable Dust Collectors

• Rugged, compact design Auto Air inlet remote control valve for deadmen system
• Typically used in conjunction with the Thompson Valve
• Low pressure drop across valve increases production
• Also Known As – “Gatekeeper”
• Commonly used on Schmidt abrasive blasting and Axxiom Manufacturing abrasive blast machines and blasting pots

• High Pressure Inline Swivel
• Pressure Rating: 7500psi; End: ¼ ; Connector: Female; End: ¼ Male
• Material: Teflon packed
• Common Inline swivel that is used between the Graco spray whip hose and the Graco spray gun

• Replacement part for the Control Line Pilot Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
• Provides sharp, clean and rapid deadman response.

BlastOne offers a full selection of industrial fittings.  This group is the Hose Barb x Female Pipe Swivel (Ball Seat), or aka “Nut & Tail”.

Other information is as follows:

• Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
• aka “Nut and Tail”
• The first dimension is the hose ID for the hose barb
• Use with crimp ferrules or worm gear clamps
• Applications: Low-Pressure SAE general service air, water, and hydraulic hose
• Operating Pressure Range:  250 PSI maximum at 72F
• Operating Temperature Range:  -40 to 160F at 150 PSI max

• Keeps Abrasive grit and dust out of the controls of your blast pot
• Helps maintain valve response and speed
• Extends valve seal life
• Must have essential for any blast pot.
• Easy to maintain and clean
• Uses a 90 micron bronze element
• 1/4″ inlet fittings

• 2223-000-99
• Full Repair Kit for the Combo Valve.

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 153mm Long and about 25mm round
• Use with a Filter Support which is inserted into the middle of the Filter
• #100 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• OEM replacement Body for the MicroValve® 1
• Schmidt® / Axxiom part # is 2125-000-06.

Grit Suppression valve, 1″ 2497-706

• 1″ (25mm) Grit Suppression Valve
• For Use with 3.5-20cuft Blast Pots
• Allows maximum pressure fluctuation without back flow of dust and abrasive
• Greatly reduces the likelihood that abrasive gets into the control valves
• suits Schmidt abrasive blasting

• 2229-100-99
• Service Kit for Electric Control Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.

• Schmidt part number 2152-100-98
• Seal Repair Kit for Thompson Valve 2
• Compatible with units using the Urethane Sleeve

Graco Z60 Package E-Xtreme Electric High Performance Airless Pump Includes Heavy Duty Cart, 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose, XTR704 Spray gun, XHD519 spray tip The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers. It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-14
• Replacement Body for Thompson Valve 2

Optimize your spray gun’s performance with the “Spray Gun Filter #100” (SKU: GR218133). Designed for older Graco airless spray guns, it filters large particles, ensuring a flawless finish, especially with low-quality paints.

• Replacement OEM Plunger for TeraValve™ XL
• Tungsten Carbide for long life
• Schmidt® / Axxiom part # 2130-000-06
• NOTE – this is included in the Extended Rebuild kit GV213000099

General purpose air pressure regulators
Ideal for regulating air pressure on airlines and pressurised equipment.

• 3600 psi / 250 bar water pressure
• 15 litres per minute (lpm)
• Hot Water up to 90 degrees Celsius
• Skid Mounted for easy transportation
• Silenced Package for noise reduction
• Comes complete with 20m of hose and a high pressure lance

The BlastOne Paint can and drum crusher for 1 to 30 litre cans and drums reduces waste volume of all your metal waste paint or product containers. Simple and safe operation using compressed air will crush all metal cans and drums. The waste metal could become a reusable resource instead of costly waste disposal expense

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-99
• Repair Kit for Thompson Valve
• Complete Repair kit for Old Style Thompson Valve including the Tungsten Carbide Plunger

• Base For Thompson Valve 2
• Replacement 1-½ Base Nipple for Thompson Valve 2
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-11

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-18
• Replacement Spring Retainer O-Ring for Thompson Valve 2

• 2152-000-05 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Piston for Thompson Valve 2

Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 152mm Long and about 25mm round
• Use with a Filter Support which is inserted into the middle of the Filter
• #30 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

Revitalize your MicroValve 3 with the Schmidt MicroValve 3 Complete Rebuild Kit (SKU: GV212810099). This comprehensive OEM replacement kit, complete with plunger, ensures optimal functionality and extended valve life.

• OEM Rebuild Kit suit MicroValve 3 – Includes Plunger
• Schmidt / Axxiom part # 2128-100-99
• Includes: GV7011005060, 2127-000-05, GV214950006, GV212810008, GV212800015

• Toggle Actuator for Pneumatic Remote Abrasive Cut-Off
• 3mm

• Replacement Tungsten Carbide Sleeve for TeraValve™ XL™
• Includes O-Ring & Internal Wipers
• Schmidt® / Axxiom part # 2130-000-07

• Fully automated via the Conjet ONE control system
• Track extensions for maximum stability
• Track sensors control travel distance
• Arm and feed beam can rotate 360°
• Removable side-covers enabling optimum reach in corners
• Compact feed-beam
• Accessory kit makes it very flexible and multi-purpose

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Service Kit for Response Deadman
• Service Kit for Pneumatic Response Deadman Handle

• Thompson Valve TC Insert
• Compatible: Thompson Valve Tungsten Carbide Sleeve
• Type: Service Kit
• Replacement Tungsten Carbide Insert for Old Style Thompson Valve
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-14

• Pneumatic Complete Retrofit kit includes:
• Triple-line coupled remote control hose
• Control hose connections for air supply
• Auto air valve and Thompson Valve II metering valve
• Pneumatic push-pull abrasive on-off switch
• Response deadman handle

• 8-ounce bottle of Throat Seal Liquid (TSL).
• Prevents paint drying on the displacement rod and packings, reducing wear.
• Extends component life of your paint spray pumps.
• Specially formulated to dissolve material on displacement rods.
• Suitable for all Paint Spray Pumps.
• Ensures throat seal packings remain lubricated, preventing the pump from running dry.
• Genuine Graco-manufactured part.

• Base for Thompson Valve 2
• Replacement 1-¼ Base Nipple for Thompson Valve 2
• 2152-000-15 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Pipe Nipple for Thompson Valve
• Replacement 1-¼ Pipe Nipple for Old Style Thompson Valve
• 2149-007-15 H Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-04
• Piston Seal for Thompson Valve
• Replacement Piston Seal for Old Style Thompson Valve

• Made by Devilbiss
• Conventional spray gun
• Available as suction or pressure feed designs
• Industry Standard set up is 2.2mm size
• Available in fluid setup sizes 0.055″ (1.4 mm), 0.070″ (1.8 mm), 0.086″ (2.2 mm), 0.110″ (2.8 mm)
• Optional high wear and carbide setups available for advance gun

• Designed for high production applications
• 5:1 Pump Ratio
• Typically used as a solvent flush pump
• Pneumatic 2-ball piston pump
• Maximum Flow Rate 7.9 litres/minute (2.1 GPM)

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-21
• Replacement O-Ring for Tungsten Carbide Sleeve for Thompson Valve 2

• 2152-000-16 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Replacement Cap Gasket for Thompson Valve 2

• High pressure airless hose
• 3:1 built-in safety factor
• Swivel nut female connectors for easy fitup connector locks up rigid when tightened
• Safety spring guards fitted to whip hose ends
• 3300 psi hose is nylon braid, others are steel braid

• Suit Graco Endurance, Extreme and Maxlife Lower “Legs”
• Repair Kits include all seals and upper rod and lower balls needed to completely repair
• Extreme Seal has 3x UHMWPE and 2x Leather Seals – Ideal for abrasive applications
• TuffStack PTFE Seals are Carbon filled Teflon – Ideal for chemical resistance and higher temperatures
• Sold Individually
• Geniune Parts – Manufactured by Graco

• Replacement Sleeve O-Rings for TeraValve™ XL™
• Pack of 10
• Schmidt® / Axxiom part # 2130-000-09

• Through-Put upto 7 ton per hour of garnet
• Designed specifically to effectively recycle garnet
• Requires totally dry abrasive to operate
• Three phase Electrical Requirements 480v, 60 amp
• Compressed Air Requirement of 40 cfm @ 100psi

• To replace the valves on your pressure release blast pot
• Retrofit Kit includes:
  • 1 1/4″ Combo Valve
  • 1 1/4″ MicroValve 3
  • Full pusherline kit
  • All interconnecting hoses
  • Control line strainer and control valve
  • Response deadman handle and Deadman line

• Use in place of discontinued item: GV215200006
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-500-06
• Plunger seal for Thompson Valve large bore
• Replacement black plunger seal for old-style Thompson Valve

• Pneumatic lift with three dimensional movement capability.
• Used in a paint booths of up to 6 metres Wide x 7.9 metres High
• Wall mounted, with adequate floor clearance for hoses etc.
• CE, CAS, and UL certified, ATEX compliant
• Operator controls the console from the platform
• Extra air outlet for tools inside the basket

• Working height of upto 4.5 metres high
• Pneumatically operated for safety in explosion areas like paint booths
• Self-centering steering for easy maneuvering
• CE, CAS, and UL certified, ATEX compliant

The “Mitey-Mite 1.0 cuft Blast Machine” (SKU: BMS10) offers efficient and reliable spot blasting, packed in a compact size. With a 70 kg Garnet capacity and micro valve metering, it’s perfect for touch-ups.

• Smallest production style pot available
• The 1.0 cuft capacity will hold 70 kg of Garnet
• Ideal for in-plant or onsite touch up work
• Comes with Micro Valve Metering Valve
• Comes with moisture trap
• 1″ Piping

• Tungsten Carbide Plunger for Thompson Valve 2
• Replacement Tungsten Carbide Plunger for Thompson Valve 2
• 2152-000-07 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

The DeFelsko® PosiTector® UTG Ultrasonic Thickness Gauge (SKU: P-INDUTG) provides precision wall thickness measurement for pipes, tanks, and structures where only one-sided access is available. With six versatile probes and compatibility with the trusted PosiTector platform, it’s ideal for corrosion monitoring and material evaluation. 

Key Features:

• Compatible with PosiTector Standard and Advanced bodies
• Six probe options for painted and unpainted surfaces
• Multi-echo technology for thru-paint measurements
• Durable, weatherproof, and dustproof design
• Comes with ultrasonic gel, calibration certificate, and more

Upgrade your Combo valve system with the Aluminum Nozzle Holder & Blow Down Hose Adapter (SKU: HFANHE1). Expertly designed for a secure fit and built to last, it’s perfect for coupling with the BH20 replacement hose.

• Blowdown Hose Adapter
• Works with Combo valve system
• 1-1/4″ NPS Thread
• Use BH20 for blow down replacement hose

• 2223-000-17
• Base for Combo Valve

BUY 3 CARTONS OF 50, GET 3 CARTONS OF 50 FREE

CONDITIONS:

•  Must add 3 cartons of the same size PainterAlls to the cart
•  The free items will match the size of the purchased items
•  No purchase limit
•  While stock lasts
•  Add your minimum amount into your cart, our system will add the additional free suits automatically

Introducing the PainterAlls Premium Disposable Paint Overalls, meticulously designed by painters, for painters. With its Hi-Tech Microfiber fabric technology, this overall ensures the user stays protected, comfortable, and free to focus on the task at hand.

• Hi-Tech Microfiber fabric technology
• Unique 5 layer protection in a popular coveralls / overalls design
• Lighter and more breathable offering superior operator comfort
• Anti-static and CE Type 5/Type 6 protection
• Come in boxes of 50

• 2223-000-07
• Cylinder for Combo Valve

• 2223-000-18
• Plug Assembly for Combo Valve

Small pop-up valve suits small ‘Mitey Mite’ blast machines

• Shaft 8mm OD
• Head 60mm OD

• 2223-000-15
• Lower Rod Guide for Combo Valve

• Gravity Paint Feed Hopper for use with Graco Big Rig and Xtreme Sprayers
• For high solids and thick bodied coatings, use a gravity feed hopper to feed the coating into the sprayer

• Handles the most inaccessible areas
• Operates under water
• Remotely controlled via CCU or any 7-Series Robot
• Can operate at long distance from the control unit
• Rigid framework to maximise keeping the precision high
• Can be dismantled for transportation and easier handling
• Customisable on request for special projects

• Replacement belt which holds control valve for the Nova 2000 Respirator helmet
• Genuine RPB part

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Increases productivity up to 800%
• Covers up to 45 m² / 485 ft² per hour
• Compatible for use on horizontal and vertical surfaces
• Closed hydroblasting with vacuum system
• 5X faster than manual blasting
• Blasts an incredible 400 mm (15,5″) cleaning width
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for quick (dis)assembly
• ATEX Zone II, Electric, Pneumatic versions available
• Compact design – fits through 24″ manhole
• Convertible to VertiDrive M3 version

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Increases productivity up to 800%
• Blasts up to 60 m² / 646 ft² per hour
• Compatible for use on horizontal, overhead and vertical surfaces
• Can operate upside down on steel surfaces via magnets
• Interchangeable applications(washing / hydroblasting / abrasive blasting)
• Does the blasting of 3 blasters
• Blasts incredible 1500 mm / 60″ pattern via multi-directional swing arm
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for compact working radius
• Powered by robust 70Vdc motors

• Fully automated via the Conjet ONE control system
• Up to 5 m vertical reach
• Main body can slide back up to 400 mm for increased stability
• Tool-kits available ensures multi ­purpose use
• Diesel or electric power
• Easy access to the engine and hydraulics for daily maintenance

• Fully automated via the Conjet ONE control system
• Main body can slide back up to 400 mm for increased stability
• Tool-kits available ensures multi ­purpose use
• Diesel or electric power
• Easy access to the engine and hydraulics for daily maintenance

• Fully automated via the Conjet ONE control system
• Up to 5 m vertical reach
• Main body can slide back up to 400mm for increased stability
• Tool-kits available ensures multipurpose use
• Diesel or electric power
• Easy access to the engine and hydraulics for daily maintenance
• Automatic Stability Control system

• Light and compact for narrow and inaccessible areas
• No electricity at the cutting head
• Operates under water
• Remotely controlled using handheld CCU for operator safety and precision at long distances
• Can be dismantled for transportation and easy handling
• The frame is built from standard components

• European-style remote controls
• 1-1/4″ (32mm) thread inlet valve
• 3/4″ (19mm) thread ported exhaust valve
• Available as an integrated inlet/exhaust assembly
• Supplied standard as separate valves for simplified installation and ease of maintenance
• Service repair kit includes seals, gaskets, etc. to service both the inlet and exhaust valve
• Optional service kit #2 also includes exhaust deflector plate and gasket
• Recommended replacement is the Combo Valve System- DM2223RK00

• OEM Replacement Urethane Sleeve for Thompson® Valve II
• OEM Replacement Tungsten Carbide Sleeve for Thompson® Valve II
• Tungsten Carbide Keyslot Thompson® Valve II
• Multi-Port Sleeve for Thompson® Valve II

• Replacement ball and chain for Western Tech remote control handle
• Operator must use as per instruction manual and conduct Risk Assessment based on end user and site conditions to determine if this product can be upgraded to a safer option.
• BlastOne Consider that it is not safe to use a ball to ‘trigger’ the deadman
• Use this ball and chain as a door knocker instead
• Sold Individually

• Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
• Tangential flow and elementless design
• Minimal pressure loss for peak blasting productivity
• Supplied with manual drain valve
• Optional autodrain accessory available
• Male threaded inlet and outlet ports
• Inlet fitting or ball valve not supplied – order separately
• Specify Size – 250cfm or 400cfm, based on the size of your blast nozzle and compressor
• Includes internal stainless steel coalescer

• Suits Schmidt’s Small blast pots
• Hemispherical Pop-up valve seals off the pot when pressurized
• Shaft is embedded in the urethane head
• Sold Individually
• Buy Pop-up Seating ring separately BAP2100000
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt®

General purpose air pressure gages for monitoring of air pressure

• Cylinder for Thompson Valve 2
• Replacement Cylinder for Thompson Valve 2
• 2152-000-09 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• 1-1/4″ Inlet for Blast machines with 1-1/4″ piping
• Works in conjunction with the Exhaust valve to make a complete deadman system
• Recommended replacement is the Combo Valve System – DM2223RK00
• Alloy construction

• Custom designed blasting and painting facilities, sized as large as application requires
• Ideal for new construction and repair, for vessels of all type and size
• Available configurations:
  • Hybrid blast/paint hall – single hall for both operations at different times
  • 2 separate halls – each single-purpose hall dedicated to blasting or painting
• Available with completely controllable environmental conditions to meet required specifications
• Compatible with abrasive recovery and recycling equipment with many available configurations

The RPB Nova Superflex Breathing Hose is designed for seamless connectivity to the air control valve or climate control tube. This replacement breathing air hose is engineered for both flexibility and silence, enhancing the blaster’s mobility and comfort by significantly reducing the noise of incoming air. Ideal for professionals seeking a quieter, more flexible solution for their respiratory protection needs.

• Designed specifically for the Nova 2000 Helmet Respirator
• Facilitates connection to air control valve or climate control tube
• Highly flexible hose allows for maximum movement
• Significantly silences the noise of incoming air for operator comfort
• Essential replacement part for maintaining respiratory protection efficiency

• Replacement Pop-up valve
• Suits Clemco blast machines
• Stem goes inside riser
• Seating rings sold separately

The DeFelsko® PosiTest® HHD Rolling Spring Connector is specifically engineered to provide a reliable connection between DeFelsko or SPY rolling spring electrodes and the PosiTest HHD High Voltage Holiday Detector. This connector is crucial for professionals conducting high voltage inspections to identify discontinuities or “holidays” in coatings on steel surfaces. The connector’s design ensures a […]

The PosiTest® HHD Series High Voltage Holiday Detector Kits (SKU: P-INDHHDKIT) deliver precision flaw detection for coatings, linings, and membranes thicker than 10 mils (250 microns). Featuring advanced pulse and continuous DC technology, these kits ensure efficient detection of holidays, porosity, pinholes, and other discontinuities. 

Key Features:

• Advanced pulse and continuous DC technology for unmatched flaw detection
• Lightweight, ergonomic design for extended usability
• Automatic voltage calculator based on coating thickness
• Multiple electrode options, including rolling spring and flat wire brush electrodes
• Certified accuracy with Long Form Certificate of Calibration included

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-25
• Vibration Disc for Thompson Valve 2

• 2223-000-02
• Pinch Ram for Combo Valve

• 2223-000-05
• Spring for Combo Valve

• 2223-000-13
• Piston Seal for Combo Valve

• 2223-000-11
• Piston for Combo Valve

• 2223-000-01
• Replacement Cap for Combo Valve

• 2223-000-10
• Lower Rod Seal for Combo Valve

This 15′ (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here.

MPN:  LPEDREDWIRE

The DeFelsko All-In-One Inspection Toolkit (SKU: INDINSPECTIONKIT8) is an exclusive, comprehensive solution for surface preparation and inspection. Featuring the new Testex Digital Micrometer Kit and DeFelsko’s trusted inspection tools, this bundle ensures accuracy, efficiency, and compliance with industry standards. 

Key Features:

• Includes DeFelsko Digital Micrometer with Testex Profile Tape (3 rolls)
• Equipped with PosiTector Advanced Body, 6000 FS Probe, and DPM Probe
• Comes with certified calibration tools and accessories
• Durable, high-quality tools for reliable inspection performance
• Exclusive savings 

• General purpose blend of Garnet Abrasive 
• Will achieve a 50-100 micron profile
• Typical consumption rate 320 kg/hr
• Typical blasting rate 15-20 m²/hr
• Inert, natural mineral
• Pinkish to reddish-brown, sub-rounded grains
• High performance, low dust abrasive
• Economical, single use abrasive which may also be recycled

• Configurable with high velocity impact protection lens
• Water-tight sealing around all seams
• Head suspension and hard hat hood options
• Peel-off lenses

• Suits 1 1/4″ (32 mm) threaded valves and pots
• Assembly includes
  • 2x half nipples
  • FLO-ring gasket
  • Hinged stainless steel collar with toggle bolt
• Use thread sealant tape or compound to ensure an airtight connection

• Non-genuine tear-off lenses to suit 3M 6000 full face respirator
• Protects the operators from paint overspray
• Sold as a pack of 25 lenses

• Deadman-operated control valve (solenoid).  Pneumatic or electric versions available.
• Uses an electric or pneumatic charge to push over the shuttle which opens ports to control the deadman system
  • Provides sharp, clean and rapid response
  • Improves safety
• Installs between twinline and inlet valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve

• The most versatile, easy-to-regulate dry blast machine on the market
• 10-150psi blasting pressure range
• With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate “metering” of hard-to-flow abrasives like Soda and fine Garnets
• With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types – fine to coarse
• With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
• G2 pneumatic deadman control, 55′ twinline control hose, 55′ water line with wet blast attachment for dust suppression included with purchase
• Genuine Products – Manufactured by Axxiom Manufacturing – Schmidt®

Burnishing tools facilitate accurate and easy use of Testex Press-O-Film replica tape.  Multiple types available, as follows:

• Stick-type.  Economical plastic, sold in packs of 10, these have 8mm round ends.  Use with all types of Testex tape.
• Burnishing ball.  Designed to use with optical grade tape, for use with the RTR 3D probe.
• High Accuracy tool.  Updated with a spring-loaded ball for the most consistent results.  Use with standard Testex tape.

• Inlet size 2″ (50 mm) female thread
• Outlet sizes: 2″ (50 mm) female thread – 1″ (25 mm) female thread – plugged (top outlet)
• Rated for up to 800 cfm airflow volume at 150 PSI
• Connected in-line close to blast machine
• Expansion flow-chamber design with internal stainless steel coalescer
• Highly effective moisture droplet removal for peak productive blasting with minimal pressure loss
• Supplied with manual drain valve
• Includes axle, wheels and handle
• Air fittings not included – specify and order separately

• Wet blast or dry blast with a single unit
• Minimal water usage (less than 1 pint /½ litre per minute) with proprietary Schmidt M.I.S.T. technology that allows precise control of the amount of water injected into the air stream while blasting
• Set and forget switching between machine modes
• Abrasive tank is dry so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
• Industry-leading productivity and reliability from Schmidt abrasive blasting technology
• Schmidt Tera Valve XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
• Wide range of blasting pressure capabilities from 10 to 150 psi
• Toggle between wet blast, dry blast, and blow-off using a single control panel
• Increased portability

• 48:1 pump ratio – 100 psi inlet pressure will deliver 4800 psi spray pressure
• Lower size is 75cc
• Ideal for touch-ups or other smaller projects
• Consistent spray pattern
• Multiple gun capabilities
• Handles a wide range of fluids
• Compact design fits into tight areas
• Ideal for applications such as steel fabrication, marine, rail, industrial and structural steel

Safeguard the display of your PosiTector® instrument against paint overspray and other contaminants with the DeFelsko® Protective Lens Shield. This pack of five thin plastic lens shields is designed to provide a clear and durable layer of protection, ensuring your device’s screen remains readable and scratch-free. Each PosiTector® instrument includes one lens shield, with additional packs available for ongoing protection.

• Designed specifically for PosiTector® instruments
• Pack of five thin plastic lens shields for durable protection
• Prevents paint overspray, dust, and debris from damaging the display
• Ensures display remains clear and scratch-free
• Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs
• Wall and overhead lighting is incorporated
• Escape doors, mixing benches and spray painting equipment are all in the design
• Can be either open front or enclosed style booths
• 12 month warranty

BULKBLASTER / MEGABLASTER

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep mounted directly on the front of the MegaBlaster
• Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
• Skid or Trailer Mounted
• Hybrid Bulk Blaster with built-in Air Drier

DeFelsko®’s PosiTest HHD Ground Cables are essential accessories for conducting accurate high voltage holiday tests. Available in 25-foot (HHDGND25) and 50-foot (HHDGND50) options, these ground cables offer flexibility and extended reach, catering to diverse operational requirements. Engineered for durability and performance, they ensure a stable and reliable ground connection, crucial for the detection of pinholes, […]

• MegaFlow heavy duty air supply hose
• 20 metre coil
• 2 inch internal diameter
• 300 psi pressure rated with 3:1 safety factor
• Supersynthetic oil resistant liner, durable UV resistant wrapped outer cover
• Temperature range: -22°F (-30°C) to +158°F (+70°C)

• Retractable fold away style
• Includes a filter wall and exhaust
• Retracts to 16% of original extended lenght
• Come in a kit form with full instruction manual for easy assembly

Click for Buying Guide

• 2″ UNC (50mm) Contractor thread
• 1¼” (32mm) wide throat entry, extra long venturi
• Extra long venturi increases performance by up to 30%
• SiALON II grade silicon nitride liner
• Aluminum jacket and thread with urethane cushioning
• New feature: Non-slip knurl

Easy Tear-away protection for RPB Spray Hood Respirator lenses.

Available options as follows:

• Single Tear-away lenses.  These are the most economical versions for standard industrial coatings applications.  These options comes in the following configurations:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version designed for the legacy T100 model, but which will work on all RPB spray hoods that do not have the optional in-helmet light.
• Cassette Lens system.  These are premium versions, designed for maximum clarity and convenience.  On time-critical spray projects, cassette lenses save valuable time by eliminating the need to stop and change lenses. These come 7 lenses per set, with 10 sets per pack as follows:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version for T200’s with face seal or any version not using the optional in-helmet light.

NOTE – the shorter versions will not cover the bottom of the lens area on the T200/T-Link full hoods, and should not be used when the optional light is used on the T-Link.

ONLINE SHOP LAUNCH OFFER: BUY ONE GRACO CONVENTIONAL AIRLESS SPRAY GUN AND GET FREE 10 PACK OF CALICO SPRAY HOODS! Added automatically to the cart. 

• Exceptional spray finish quality
• Lightweight and robust gun
• Ergonomic design for operator comfort and control
• Air inlet swivel for ease of movement
• Unique replaceable PEEK or stainless steel needle tip reduces maintenance costs
• Superbly engineered with few parts simple to disassemble for cleaning and service
• Convertible between airspray and compliant (HVLP models also available)
• Available in pressure feed, siphon feed or gravity feed setups with or without cups

• Suits Graco King Xtreme and Maxlife Lowers
• Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
• Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
• Sold as a kit
• Genuine Parts – Manufactured by Graco

• Replacement OEM Plunger Seal suit TeraValve XL
• Pack of 10
• Schmidt / Axxiom Part # 2130-000-08

Experience powerful and efficient garnet removal with the “Diesel Powered Skid Mounted Vacuum System – Vacuload Series 8” (SKU: VAVacuload8D). Designed for contractors on extended projects, this system can handle up to 12 tons/hour with optimal filtration.

• Will vacuum up to 12 ton/hour of garnet
• Requires 30cfm of air at 120 psi to operate
• Skid mounted, Diesel engine
• 6 Dust Collector Cartridges with filtration area of 126 m2
• Automatic Reverse Pulse Cleaning

Easily measure wet film thickness between 25 to 2032 microns with the durable and reusable “Wet Film Thickness Gauge Aluminum Pack of 10” (SKU: INB115AL). Perfect for consistent and precise readings in protective coating applications.

• Re-usable aluminum gauge
• Measure wet film 25 to 2032 micron
• Come in pack 10

• Support for Long Filter
• Suits 6″ Filter

• Re-usable brass gauge
• Measurement range 25 to 3200 microns
• Sold as singles, best price in pack of 200

Have a good pot that you hate to throw away?   The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process!  Details as follows:

• Your existing pot must be structurally sound and must have at least 150mm clearance below it.
• The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.  
  • Note:  Handway and pop-up components are available separately, if needed.  In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance).  See Related Products below.
• Retrofit kits are available in either pneumatic or electric and are offered in both 32mm and 38mm valve sizes.
• Installation instructions are included in the box (and under the Documents tab here).  If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.

• Retractable Paint Booths are designed and manufactured to meet the current Spray Booth Standards- AS4114
• Most booths are customised to individual needs
• Can be either dry filter or water wash systems
• Retracts to 16% of its original size, so you can use the space for other work types
• Retractable booths are available in open or closed front configurations
• 12 month warranty
• When using a Retractable Spray Booth – it is possible to extend the approved designated painting area
• Workshop flexibility is greatly enhanced with spray booth and paint booths that are retractable – when they are not in use a retractable paint booth can be rolled out the way so the work area can be effectively used for other trades
• The time required to retract a spray booth is normally less than 5 to 10 minutes

• Manufactured by Schmidt Abrasive Blasting & Axxiom Manufacturing to BlastOne specifications
• Valving system designed to have a maximum of 3psi pressure drop
• Specified Capacity (approx)
  • 3.5 cu ft / 99 litres
  • Abrasive Capacity (approx)
  • Garnet – 230 kg
  • Steel Grit – 390 kg
• Pressure Rating: 150psi
• Includes: Moisture separator and inlet fitting

• Replacement silencers for the SnakeBite family of blast nozzles
• Up to 45% less operator fatigue
• Up to 16dB noise reduction
• 2 versions available
  • Standard Pressure Silencer effective between 90-110 psi
  • Low-Pressure Silencer effective between 70-90 psi

BULK BLASTER & MEGA BLASTER

• Bulk Blast Pot capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• Ultimate Bulk Mega blast machine for large onsite blasting contractors
• Comes with 4 Thompson Valve metering valves
• Mounted on a highway certified trailer

BULK BLAST POT

• Blast Bulk Pot capacity 75 cu ft / 2100 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 5 tonne Bulk Blaster
• Ideal for mounting to the back of a truck
• Comes with 2 Thompson Valve abrasive metering valves, can have upto 4
• Skid Mounted Mega Pot

Ensure precise metering with the Schmidt Teravalve XL Seat (SKU: GV213000010) – an OEM replacement seat for the latest generation TeraValve Abrasive Metering Valve. Ideal for use with GMA Garnet and other abrasive medias.

• Replacement OEM Seat suit Teravalve XL
• One of the most common wear items, would suggest having a couple on hand
• Schmidt / Axxiom part # 2130-000-10

The Bristle Blaster Kit is a portable surface preparation tool that combines the ability to produce an abrasive blasted finish with the high mobility and flexibility of a portable hand-held tool.

• Available in Cordless, Electric and Pneumatic models
• The hardened angled bristle wheels works at up to 10x the speed of a wire brush tool
• Portable surface conditioning kit ideal for small areas and touch up work
• Can get into tight corners and angles
• Achieves a surface roughness or profile of 40-120 microns with a finish similar to abrasive blasting, using hardened angled bristle wheels

NEW! Cordless Bristle Blaster now available!

• Manufactured cast steel abrasive
• Used mainly in airless wheel blast machines
• Blue grey, angular granules (GL = blue, GH = grey)
• Can be recycled many times
• High performance, cleaning and descaling abrasive
• Sharp edges gradually round over as it wears
• Standard GL and GH hardness grit
• Special GP hardness and other specifications available
• Manufactured to conform to: SAE J444, SAE J1993, SFSA 20-66
• Hardness: GL = 56-60 HRc, GH = 60-65 HRc
• Packed in 25kg bags

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:

• PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
• PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids

BlastOne offers all instruments and accessories from the DeFelsko product line.

These rolling springs are the electrodes suited for DeFelsko® high voltage holiday detection on steel pipes, and additional information is as follows:

• Multiple sizes available, 4-36″
• Each electrode includes two pre-installed spring couplers. Replacement couplers are available in packs of 2.
• Requires one Spring Connector to connect either DeFelsko or SPY spring electrodes to PosiTest HHD (sold separately).
• Sold Individually

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc.

These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces.  Additional information is as follows:

• Multiple sizes available between 2 – 48″ wide (51 to 1219 mm)
• Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do.  Each brush is supplied ready-to-use.
• Sold individually.

• Refill kit with 50 patches
• Used to measure total salts (Chlorides)
• High adhesion version
• Measurement range: 20 ppm to 5000 ppm
• Used in accordance with ISO8502-6, AS1627-4 Standards

The PosiTector® 6000 probe & advanced gage / body kit family – DeFelsko’s premium solution for non-destructive coating thickness measurement on metallic* substrates. The PosiTector 6000 series is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  The PosiTector Gauge / Body is the tried-and-true platform offering interchangeability with most DeFelsko probes.
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows Kit / Packages for the Advanced Body with your choice of PosiTector 6000 probe.  (Compare the features of the PosiTector Standard and Advanced Body on their separate page.) Other configurations (Probe-only, Body-only and Standard Body / Probe kits) are shown on their separate pages.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

The PosiTector® 6000 probe & standard gage / body kit family – DeFelsko’s basic solution for non-destructive coating thickness measurement on metallic* substrates. The PosiTector 6000 series is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  The PosiTector Gauge / Body is the tried-and-true platform offering interchangeability with most DeFelsko probes.
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows Kit / Packages for the Standard Body with your choice of PosiTector 6000 probe.  (Compare the features of the PosiTector Standard and Advanced Body on their separate page.) Other configurations (Probe-only, Body-only and Advanced Body / Probe kits are shown on their separate pages.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

The Testex tape process of measuring surface profile has been used for over 50 years.  It is a simple, reliable, and repeatable way of determining surface profile parameters.  DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors.

DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging.  NOTE – the profile ranges are not entirely the same between them – their respective ranges are shown under the Product Description tab.

Tape options include the following:

• Conventional Testex Press-O-Film Tape grades.
  • Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
• Optical Grade Testex Press-O-Film Tape Grades
  • Use with PosiTector RTR 3D probe.  Provides surface data files (.sdf) that allow both 2D and 3D measurements.

• 2125-000-01
• Replacement Knob for Old Style MicroValve

• Coupling Sure lock
• BlastOne Surelock Coupling – 2″ BSP(M)

The RPB® Radex® Breathing Air Filter Cartridge (SKU: APF3100) is a genuine replacement filter designed for RPB Radex and Bullard breathing air filters. This carbon-filled cartridge effectively removes unwanted odors and impurities, ensuring clean air for industrial applications. 

Key Features:

• Carbon-filled cartridge removes smells and impurities from breathing air
• Compatible with RPB Radex and Bullard air filters
• Does not remove Carbon Monoxide (CO)
• Replace every 3 months or 400 hours of use
• Genuine RPB Safety product

• Rebuild kit for Graco XTR+ Airless Spray Guns
• Gun repair kit includes gasket, needle, and seat (full list under description tab)
• Genuine Parts – Manufactured by Graco

MPN:  248837

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs from modular constructions
• Can incorporate any type of draft system
• Heavy duty door design ensures long life
• 12 month warranty

• The Premium Industry Standard AirDryer
• Uses Aftercooler design to cool the air for maximum moisture removal
• Pneumatic Fan motor
• Easy Maintenance
• Size based on the size of your compressor

• Fully compliant with all Australian regulations
• Exhausts at a rate of 0.5M/second
• 2 Standard widths – 1 metre and 2 metre
• Uses Andreae filters to capture overspray

• Hold*Blast is a cost-effective flash rust prevention solution
• Environmentally safe and compatible with all coatings
• It is used to “Hold the Blast” to allow primer to be applied
• Added in low concentration (2-10%) to the ‘blast water’ to prevent flash rusting
• Ideal to mix with your water when wet blasting
• Compare to Hold*Tite 102!
• Sold in 5-gallon pails
• 32 pails ship on 1 pallet

• Complete System to spray Passive Fire Protection (PFP) coatings
• Uses a base Graco XM sprayer and includes
  • Two Check-Mate® 20-gal (76 l) heated hopper feed modules with agitators and level sensors
  • 50 ft (15 m) dual heated hose set
  • Remote mix manifold and 17 ft (5 m) of static mixing line
  • 30:1 solvent flush pump
  • XHF Gun with 429 tip.

Replacement seating ring suits BlastOne’s Mitey Mite series 1.0 & 2.0 cubic foot capacity blast pots

• 100 psi max fluid output pressure
• 8 gallon (30 liter) max free flow
• Aluminum pump with fluid re-circulation valve
• (10 mm) fluid outlet
• High flow air regulators
• Comes with 1.4 mm AirPro Spray Gun and 7.5 m of Twin Air/Paint Hose
• Available as Pail Mount, Stand Mount or Cart Mount

• 3600 psi rated
• ComfortGrip grip handle and 2 finger trigger
• EasyAccess #60 filter inside handle (Use GR287032)
• Inbuilt high-pressure swivel
• Includes 517 RacX Tip and Base

• 20.0 cu ft Blast pot
• Manufactured by Schmidt to BlastOne unique specifications
• Dual outlet Thompson Valve II abrasive metering valves
• Approx 1350 kg garnet abrasive capacity
• Comes with two pneumatic deadman handles and two lengths of control hose
• Excellent for a blastroom application with 1-2 blasters
• Meets all Australian Standards

BlastOne offers a full selection of industrial fittings.  This group is the Hose Barb x Male Pipe NPTF brass fittings.  Other information is as follows:

• Hose Barb x Male Pipe NPTF (first dimension is the hose ID for the hose barb)
• Use with crimp ferrules or worm-gear clamps
• Applications: Low Pressure SAE general service air, water, and hydraulic hoses
• Operating Pressure Range:  250 PSI Maximum at 72F
• Operating Temperature Range:  -4C to 71F at 150 PSI Max.

• WATCH VIDEO IN THE IMAGE SLIDER
• Highest productivity hand-held blast nozzle available
• Over double the productivity of a #8 high-performance blast nozzle with less operator fatigue
• Half the thrust of other #10 blast nozzles available – Feels like you’re blasting with a #7 nozzle
• Up to 16dBA noise reduction – That’s 75% quieter!
• Ideal for blasting acres of steel such as storage tanks, bridges, and ship hulls
• Standard contractor nozzle inlet thread
• Delivers faster cleaning rates and increased profit by reducing project duration
• Requires 750cfm compressor
• FREE TRIAL AVAILABLE!

• Suitable for lead paint projects with 6-20 men
• Has four showers, an airlock and larger change room.
• Has separate ‘Dirty’ entrance chamber and ‘Clean’ exit chamber
• Waste water filtration system and hot and cold showers
• A/C and heating Systems
• ‘Dirty’ room has HEPA (lead rated) negative air filtration

• 7250 psi rated
• Hand-tight guard – no tools required
• Long life guaranteed
• Tip and guard are interchangeable with the GHD spray tip
• Use with industrial high solids and heavy duty coatings

BlastOne offers all DeFelsko instruments and accessories on-line for easy access to operation manuals, ordering, and more.

This group of products are stand-alone voltage testers for the High Voltage Holiday Detectors.  Although the PosiTest® HHD units have built-in voltmeters with a traceable calibration certificate, other brands may not, and some standards call for standalone voltmeter verification.

Two versions are available, as follows:

• MPN: HHDVERIFY, for all Pulse-type holiday detectors in the range from 500 to 35,000 volts.
• MPN:  HHDCVERIFY, for all Continuous-type holiday detectors in the range from 500 to 30,000 volts.

Note:  Each unit comes ready-to-use with verifier, 1.8m (6 ft) ground wire, batteries, and more.

Features:

• Two x 2” ports, unfitted
• Four x 1” ports, unfitted
• One x ¼” drain port, valve fitted
• Female BSP threaded ports

Certified to AS1210 – 150 psi

 The Climate Control Tubes for RPB Nova Helmet Respirators (SKU: P-HLNVCC) provide tailored air temperature control for Nova 3, Nova 2000, and other compatible supplied-air respirators. These rugged devices enhance operator comfort by cooling or heating incoming air, ensuring optimal performance in extreme climates. 

Key Features:

• Compatible with RPB Nova 3, Nova 2000, and most supplied-air helmets and hoods
• C40 device cools air by up to 52°F (29°C) or heats by 30°F (17°C)
• Cool Air Tube cools air by 32°F (17°C); Heat Tube heats air by 30°F (17°C)
• Flow Control Valve provides ambient air with adjustable volume
• Durable design with serviceable components, belt, and buckle included

FOR HIRE OR PURCHASE The Schmidt Bulk AmphiBlast combines the features of a MegaBlaster and dustless vapour abrasive blasting, and is the latest in technology and efficiency. The Bulk AmphiBlast has a super large capacity that allows 2-4 blasters to blast for 8 hours each without stopping to refill the blast pot and each blaster can choose independently if they want to dry blast, mist blast, Softwash^TM or blow down.

• 100# mesh coating spray gun filter for in handle filter units
• Gun Filter for Series II Guns

• Spray Gun Cleaning Kit
• Ultimate Cleaning kits to give you better spray gun operation. Durable, solvent-compatible storage – keeps your tools organized

• RAC 5 Hand Tite Tip Guard
• Size: 7/8″
• Use with all RAC-4 and RAC-5 series tips
• 243161 or 243-161

• Graco RAC X Spray Tip Guard
• 7/8′ thread

• Wet sponge spark tester
• Test coatings up to 12 mil (300 micron)
• Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick
• Audible pinhole-detection alarm
• Powered by three AA batteries
• Kit includes detector probe unit, earth lead with alligator clip and instructions

• 60# mesh coating spray gun filter for in handle filter units
• #60 Mesh Gun Filter
• Series II Guns

• Color coded for easy identification:
  • Grey filter frame #30 mesh
  • Black filter frame #60 mesh
  • Blue filter frame #100 mesh
  • Red filter frame #200 mesh
• Open both ends – can be installed either way
• Suits large EasyOut filters, UltraMax, GMax sprayers
• Sold individually

• Suits Pressure Release blowdown systems like the Combo/Micro Blast Pot
• Sound levels are quieted to 110 dB (at 100 psi)
• Safely reduces abrasive particles that can escape during blowdown
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Attaches to Combo Valve)
  • Any required fittings
  • Does not include a new Blow Down hose
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

Also known as Brown Fused Alumina, Brown Fused Aluminium Oxide Abrasive Media Is a Long Lasting and Sharp abrasive used for high-performance applications and general industry use. Aluminium oxide is very hard and aggressive and is commonly used for mixing with paint coatings for nonslip surfaces.

Pop-Up Umbrella Spider Plate for 24″ large blast pot

• Sits above pop-up valve. Allows valve to pop-up easily when a head of abrasive is stored above the blast machine
• Used in auto-loading applications such as blastrooms, recovery systems etc.

• Standard-length replacement Half-Nipple for Tri-Clover
• Part of main Tri-Clover Assembly (GV2410320 or GV2410320SP) – 2 nipples are required for this assembly
• Recommend replacing the O-ring when replacing these nipples – see part GV2410323
• Longer version also available – see part GV2410321L  – NOTE – The longer version is recommended when using the Tri-clover without the Union-End ball valve.

All the power. Half the size!

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• Designed to optimise the use of GMA garnet
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

Act quick! Limited supply.

• X-AIR and XAVS Diesel Compressors
• Silenced, single stage, oil injected screw element powered by a liquid cooled, six cylinder Caterpillar engine.
• Comes standard with AirXpert 2.0, OilXpert, new improved vessel design, Eco mode and Fleetlink telematics.
• Normal effective working pressure between 5 to 14 bar (72 – 150 psi).
• Flow between 1235 – 1136 cfm (583 – 536 L/s).

• CPM, CPD, CPE, CPF & CPVS range of stationary electric compressors.
• Available in fixed or variable speed models.
• Silenced, single stage, oil injected screw element powered by a 400 Volt, 50 Hz 3 phase motor.
• Normal effective working pressures range between 4 to 13 bar (58 – 188 psi).
• Flow range between 27 – 1887 cfm (13 – 890 L/s).

• Dual Wheeled Trailer Mounted Blasting Package
• BMS6.5 blast machine with Thompson Valve outlet
• 400 cfm AirPrep Air Drier
• 375 cfm 150 psi diesel air compressor
• Breathing air filter
• Carbon monoxide alarm
• Tool box
• Hose rack
• Room for 1 skid of abrasive
• Dustless Vapor Blasting

• 20 tons per hour of garnet/alox/ staurolite
• 4 tons per hour of steel grit.
• Requires three phase electric 480v, 30 amp
• Compressed Air Requirement 20 cfm @ 100psi
• Requires completely dry abrasive to operate.
• Will process garnet, steel grit, aluminum oxide, and staurolite.
• High-capacity bucket elevator resists jamming and economizes power consumption.
• Regular trash screen design resists blocking and removes large trash.
• Air-wash removes fine wastes and is infinitely variable to remove exactly the amount you want.

FOR RENTAL OR PURCHASE

• Combination Skid – MistBlaster and AirDryer Package
• Capable of doing wet and dry blasting – ultimate flexibility for any job!
• 6.5 cu. ft. Schmidt Blast Pot with MistBlaster Conversion
• Teravalve XL Abrasive Metering Valve
• 400cfm Moisture Removal System (Select Deliquescent Air Dryer or Squat AfterCooler)
• 189 liter water tank & pump
• Select if you do or don’t want the Operator Accessories Kit (RPB Breathing air filter and  GX4 CO Monitor, 5cm Bull hose, 3.175cm SupaFlex Blast Hose, Nova 3 Blast Helmet, and #6 Blast Nozzle)

• Flame Retardant
• 3m wide and 50 metres long
• Twice as strong as the strongest conventional sheeting
• When blasting will contain dust, but will lightly breath
• When painting will disperse fumes from volatile solvents
• Keeps rain out of contained area, only a fine mist will penetrate

The RPB Nova 3 Blast Helmet Respirator (SKU: P-HLNV3) is the industry leader in operator comfort and safety, offering NIOSH-certified respiratory protection with a 1000 APF rating. Designed for blasting professionals, it features advanced padding, noise attenuation, and customizable cape and climate control options. 

Key Features:

• Comfort padding for even weight distribution and enhanced head movement
• 20dB noise attenuation for quieter operation
• NIOSH-approved with a 1000 APF rating for ultimate respiratory protection
• Multiple cape options: nylon or leather in standard and extended lengths
• Climate control options: heating, cooling, and PAPR systems

Ensure safety with the Safety Whipcheck for Hose Connections (SKU: P-HFSCA). Designed for hoses from ½” to 3½”, these steel-constructed whipchecks restrain hoses during unexpected disconnections.

• Use of a safety whipcheck restraint is mandatory on all hoses
• Whip checks are of steel construction
• HF SCA-1 cable suits hoses ½” to 2 ½”
• For use on Blast hoses (15 mm to 60 mm) OD
• HF SCA-2 cable suits hoses 2″ to 3½”
• For use on blast and bull air hoses (45 mm to 90 mm) OD
• Whip Checks restrains hoses in the event of a failure or accidental disconnection

• Filters breathing air to remove oils, odors, moisture, dust
• Does not remove CO, you need an additional monitor for that.
• Can be either floor or wall mounted, uses the same bracket
• Lightweight, site rugged, cast aluminum construction
• Filter only has 4 bolts to remove to change the filter every 3 months which saves you time
• Filter Sold with
  • RPB Radex Filter 04-900
  • Quick connect outlet fitting
  • Inlet air hose connector

• DFT Combo Gauge (ferrous and non-ferrous) measures non-magnetic coatings on all metals
• Most reliable, economical DFT Gage available
• Measuring range is 0 – 1000 microns
• Fast and responsive measurements up to 60 per minute
• Built in, Strong, wear-resistant, ruby-tipped probe
• Convenient size & compact coating thickness gauge
• Simple Reset feature when no zero reference is available
• Gauge comes complete with storage case, certified thickness shims, batteries
• Has a 2-year warranty

• 2125-000-09
• Replacement Gasket for Old Style MicroValve

Heavy Duty Blast Room can be designed for use with any steel or heavy machinery manufacturers, refinishing facilities, for oil and gas components, or in job shops. 

The “General Purpose Custom Engineered Blast Rooms and Facilities” (SKU: SBMGS) are heavy-duty, long-term sandblasting solutions. Designed for diverse industrial needs, these rooms feature robust steel panels, advanced abrasive recovery systems, and extensive customizability. Ideal for consistent operations seeking a controlled blasting environment.

• Replacement belt for Pneumatic or Electric Bristle Blaster Kits
• Available as Carbon Steel *Most Popular* or Stainless Steel
• Stainless steel belts are primarily used for specialty blasting of stainless steel and aluminum
• Used in conjunction with an accelerator bar to increase the impact speed of the wire to the surface
• Available as 11mm or 23mm

• Wire Bristles
• Wooden Handle

Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:

• 3/8″ NPT Thread in either Male or Female configuration
• Male version has brass threads and requires a minimum opening clearance of 1″.  This version is 1-7/8″ long.
• Female version has steel threads and requires a minimum opening clearance of only ¾”.  This version is 3-1/8″ long.
• These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
• Angle options include:
  • 45° & 60° forward blast
  • 90° right angle blast
  • 135° reverse blast
• Some options available in double, triple or quad orifices in addition to single.
  • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
• Stock version uses tungsten carbide lining.

Note:  Due to the angled blast stream, these nozzles will wear more quickly than traditional versions.  For larger projects, we offer long-life Roctec nozzle linings by special order, with a minimum order quantity of 5.  Contact us for further details.

The Nut and Tail Connector (MPN: P-FMTN) is a durable, two-piece fitting designed specifically for AHR general-purpose air hoses used in blast equipment. Constructed with a swivel nut and female NPS long shank coupling, this connector offers versatile clamping options for secure, leak-free performance in pusher line assemblies and blast pots.

• MPN: P-FMTN
• Two-piece design: Hose tail to swivel nut with female NPS thread
• Material: Made from plated steel, not plated iron, for corrosion resistance
• Clamping options: Compatible with double bolt clamp or bandit clamp
• Gasket: Extra-thick gasket minimizes dislodgment risk
• Applications: Ideal for blast pot pusher lines and general-purpose air hoses

• 100 psi max fluid output pressure
• 8 gallon (30 liter) max free flow
• Aluminum pump with fluid re-circulation valve
• (10 mm) fluid outlet
• High flow air regulators
• Comes with 1.4 mm AirPro Spray Gun and 7.5 m of Twin Air/Paint Hose
• Available as Pail Mount, Stand Mount or Cart Mount

• Wet blast or dry blast with a single unit
• Lightweight and most portable in the AmphiBlast family
• Minimal water usage (less than 1 pint / ½ litre per minute)
• Set and forget switching between machine modes
• Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
• Schmidt Tera Valve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
• Electric water pump provides high flow water during softwash or wash down
• Wide range of blasting pressure capabilities from 10 to 150 psi
• Toggle between wet blast, dry blast, and blow-off using a single control panel
• Can fit through a 24″ doorway with ease (even with the onboard tank)

BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:

• DMRMCATCS Abrasive Trap Screen (3)
• BA02013 O-Ring (2)
• Clean Screen Decal (Not available separately)
• DMRMCATCSG Gasket

NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.

• Multi Purpose full face respirator for grinding, welding and painting
• Loved by Painting Contractors that have to do weld repairs to tanks before recoating
• Has a padding system that makes it move properly with your head
• Operates from either Supplied Air or via Back pack PAPR
• Approved as a Hard Hat (ANSI Z89.1)
• Multiple Capes available – Tychem QC (Good for Painting) Zytec FR (Good for Welding/Grinding)
• Has optional weld visor attachment
• Sold as a package – select your options
• Genuine Products – Manufactured by RPB Safety

The world’s quietest blast nozzle! Click for Buying Guide

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• Designed to optimise the use of GMA garnet
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

Act quick! Limited supply.

• Designed for offshore and chemical plants
• Foldable mast for easy access to narrow passages and through standard doors
• Working height of upto 4.5 metres high
• Pneumatically operated for safety in explosion areas like paint booths
• CE, CAS, and UL certified, ATEX compliant

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep mounted directly on the front of the MegaBlaster Bulk Blaster
• Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
• Skid Mounted Bulk Blast Pot

• Uses Graco XL air motor – the largest motor ever built by Graco
• 45:1 pump ratio
• Mounted on a heavy duty cart
• No paint feed hopper included – buy separately
• High flow rate will handle multiple spray guns

The PosiTector® DPM – DeFelsko’s solution for measurement of climatic conditions for industrial coating applications.  Versatile and capable, these environmental measuring instruments have the following highlights:

• Familiar.  Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
• Capable.  Measures and records environmental conditions including:
  • Relative Humidity (RH)
  • Air Temperature
  • Surface Temperature
  • Dew Point temperature
  • Surface/Dew Point Delta
  • Wind speed (one model only)
  • Wet-Bulb (when used with Advanced Bodies only)
• Configurable.  Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
  • DPM Integral, with direct-contact surface thermometer
  • DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
  • DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
    •  A liquid temperature probe, for measuring paint temperature prior to application
    • A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
  • DPMA Integral, with all standard features plus a wind-speed indicator
  • DPMD Cabled, with ½” NPT threads for insertion into pipe and other areas that can’t be accessed by other versions.

Note:  The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.

Steel Shot Abrasive in Australia

• Steel shot – manufactured hypereutectoid, metal spheres used in airless centrifugal wheel blast machines to clean foundry castings, surface polishing and shot peening
• Also used in portable trackblast airless wheel blast machines for concrete floor preparation, blasting ship decks and profiling
• Quality Steel Shot is very long lasting
• Steel Shot can be recycled many times
• Hardness: 40-50 HRc. Other hardness’s of steel shot are available on request
• Special, Stainless Steel Shot and High Hardness, Milspec (Military Specification Peening Steel Shot) specification shots available
• Manufactured to conform to: SAE J444, SAE J827, SFSA 20-66
• Steel Shot is packed in 25kg bags, drums or bulk bags
• BlastOne is a leading steel shot supplier in Australia & New Zealand

• Diesel Compressor with steel canopy
• Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel (select models)
• LED road lights (select models)
• Spillage free frame & AS1210 vessel including aftercooler and water separator

• Used for short-term dust collection
  • After 1 days use, they need to be washed and dried
    • Fabric usually clogs after 4-6 hours
• Fits many portable dust extraction fans
  • NOTE – Not recommended for Black Max electric fans larger than 16″
• Used for sandblasting dust control
  • Nuisance, non-toxic, non-hazardous dust
• Ideal for short-term abrasive blasting projects
• Made from 100% cotton
• Includes zipper access for cleaning out loose dust before washing (not applicable to DCBMX2100)
• Breathable for air filtration
• High volume air flow design
• Tapered necks for easy attachment to extraction fans
• Quick to set-up and pull-down
• Recommended purchasing in quantities of 10

NOTE – Dust socks will not capture dust under 10 microns. Hazardous dusts, such as lead, asbestos, beryllium, sillica, or PCBS, are usually under 5 microns. 

• Throat Seal Liquid
• Size: 1 quart (0.95 Ltr)
• Package: Bottle
• Prevents paint drying on the displacement rod and packings
• Check the pump throat and top up the liquid daily

The Wheelabrator Titan wheel allows for a multitude of possibilities and variations to fit your shot blast machine The wheel housing is available in many sizes with a wide variety of wheel diameters, and blade lengths to define the perfect wheel for your specific application and production requirements for any wheel blast machine. The Titan wheel offer includes unique automatic control cage adjustment, indication of blade wear and a optional magna valve for precise control of the abrasive media flow with all wheel blasters. All existing shot blast machines, wheel blast machines & centrifugal wheel blasters cab benefit from the Wheelabrator latest generation blast wheel.

• Unfitted Blast Hose
• High quality, long lasting sandblasting hose
• Blast Hoses have a thick, anti-static, natural rubber liner
• Made to BlastOne Blast Hose specification
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap™ outer blasting hose cover
• Heavy Wall Unfitted Blast Hose
• Recommended for use as an extension hose
• Fit with your choice of couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.

• Unfitted Blast Hose
• Superior quality, lightweight and highly flexible sandblasting hose
• Blast Hoses have anti-static, natural rubber liner
• Rated to minimum 175 psi – 3:1 safety factor
• Made to BlastOne Blast Hose specifications
• Robust TuffRap outer blasting hose cover
• Light Wall Blast Hose
• Commonly known as supa hose or supahose
• Fit with your choice of nozzle holder and couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly certificate is available upon request

Also known as White Fused Alumina, White Fused Aluminium Oxide Abrasive Media Is a Clean and Sharp abrasive used for high-performance and delicate blasting and cleaning projects, including cleaning of hi-tech metals. White Fused Alumina is an inert material with excellent abrasive qualities & available from most BlastOne branches in Australia and New Zealand. Brown aluminum oxide also available.

The “Schmidt MicroValve 3 Base – 1-1/4″ x 1-1/2″” (SKU: GV212800710) is a high-quality replacement part for MV3 Schmidt microvalves, made of durable hardened steel.

• OEM MicroValve 3 Pipe Nipple 1 1/4″ MNPT x 1 1/2″ MNPT
• Made of Hardened Steel
• Schmidt / Axxiom Part # 2128-007-10

• Special twin blade head design
• Achieves proper effective mixing action
• Minimal air-entrainment
• Stainless steel construction
• Ring-bound blades for safe handling
• Available in 3 head sizes:
• small HS
• medium HS
• large PS

• Exhaust Muffler for RMS
• Effective noise attenuation
• Flow-through design
• Female thread connection port

Dust Collector Ducting

• 20″ (500 mm) Internal Diameter
• 10 metre length
• Heavy Duty with Wear Strips and Rope Tabs
• Tough coated membrane wrapping
• Spiral reinforcing ribs for suction applications
• ‘Concertinas’ for compact transportation and storage
• Can be used under negative or positive pressure
• can be used in mining applications

• 3600 psi rated
• Ergonomic, lightweight, design
• Easy trigger pull
• Built-in SmoothGlide hose swivel connector
• EasyAccess filter in handle

• Genuine RPB replacement lens for L4 Blast Light
• Ensure you can work with optimal illumination as paint mist eventually coats lens
• Comes in Pack of 10

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2130-000-98
• Replacement Parts Kit (Seals Only) for TeraValve XL

Quickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems.  Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems.

DeFelsko MPN:  AIR

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

Inspection instruments are an investment worth protecting and DeFelsko has a range of protective cases available, as follows:

• The PosiTector Case.  Sturdy hardshell design designed to carry a PosiTector gage / body and multiple probes.  Space for manuals, calibration certificates, and more.  MPN: CASEINSP
• The Pelican Standard Inspection Kit Case.  Lightweight, watertight, and crushproof, this case securely stores a PosiTector Gage and 3+ PosiTector probes with customized foam inserts.  30 x 22.5 x 13.2cm.  The MPN is CASEINSP-P.
• The Pelican Large Inspection Kit Case.  Like the smaller Standard version above, this unit is lightweight, watertight, and crushproof but is larger to accommodate 5+ probes as well as SST Soluble Salt Tester accessories.  43.2 x 29.7 x 15.7cm.  The MPN is CASEINSPL-P.
• The Pelican Adhesion Tester Case.  Heavy duty, waterproof construction features customized foam inserts for the PosiTest AT-A automatic tester.  46.2 x 34 x 17cm.  The MPN is CASEATAB-P.

• Used for blasting pipes 3″-12″ Internal Diameter
• Uses tungsten carbide deflection head and 1/2″ throat nozzle
• Select the unit that will best match your Air Supply:
  • 1/2″ Throat Nozzle: 250 cfm
  • 5/8″ Throat Nozzle: 400 cfm
• Neither of these packages come with a transport carriage – Order Separately
  • Collar and Button 3″-5″ Pipes
  • Scissor Type 5″-12″ Pipes
• Successful Pipe Internal Projects require some specialist knowledge – contact our team for assistance

• Uncorded, Tapered Style
• Packed in individual pairs
• Box of 200 pairs

• Xtreme Lower Long Filter Screen
• Long Filter Screen #60 mesh (pkt 25)
• Mesh: #60 (6″)

• Graco Adapt Nipple for Xtreme Quick Knockoff
• Connects onto the bottom of the lower for the pick up tube with Quick Knock off fitting to attach to

• Suits RPB Nova 3 Blast Helmet
• Replacement Side Wings, which encase the blasters head and ears
• Replace often for hygienic reasons
• Smaller heads = thicker paddings
• Larger heads = thinner paddings
• Sold as a pair of Padding Covers – Left & Right
• Genuine Parts – Manufactured by RPB Safety

• Coupling for Sure lock
• Surelock Coupling – 2″ BSP(F)

• Complete Range of blast and vacuum work heads and equipment
• Typically work best on flat surfaces, custom units are available upon request
• Largest workhead available – Large with Wheels
• Pistol Grip – *Most Popular* easiest to hold onto
• Right Angle – Designed to get into smaller areas
• Standard Unit – the Original Blast and Vac head
• aka: Blastnvac 6 Head
• Choose your style

• Seals Kit for MicroValve III
• Replacement Seals Kit for Old Style MicroValve
• Schmidt abrasive blasting equipment/ Axxiom Manufacturing part number  2125-100-98

• Portable breathing air station with regulator
• 4 operators can use the one machine
• Inbuilt carbon monoxide warning alarm light and siren
• Powered by two x 9 Volt batteries included

• Will vacuum up to 8 ton/hour of garnet
• Require a 750-900cfm compressor of air at 120 psi to operate
• Generates 1500-1800cfm vacuum 
• Skid mounted, Pneumatically operated
• 4 Dust Collector Cartridges with filtration area of 84 m2
• Automatic Reverse Pulse Cleaning

The RPB Nova 2000 Blast Helmet with the Cape Cover Band is designed to ensure optimal protection during blasting operations. This cover band is specifically engineered to prevent dust and grit from entering the gap between the cape and the helmet, as well as keeping grit out of the press studs for easier reattachment after cleaning. Sold individually, this genuine part is manufactured by RPB Safety, guaranteeing compatibility and quality for your Nova 2000 helmet.

• Designed exclusively for the RPB Nova 2000 Blast Helmet
• Prevents dust and grit penetration for enhanced protection
• Keeps press studs free of grit for easy cape reattachment
• Sold individually for convenience
• Genuine RPB Safety manufactured part ensures quality and compatibility

• Manufacture: Graco; Series: Xtreme
• Suction Kit for Xtreme Pump Kit
• Includes the suction hose with quick knock off coupling and pick up tube

• Low vibration
• Modular tool design for flexibility
• Lightweight and ergonomic for one-handed operation
• Pistol grip and straight versions allow access in any situation
• Easy chisel change
• Chisel included

• Heavy-duty leather front for protection of arms and legs, extending coverall life.
• Strong cotton back for ventilation and comfort in hot climates.
• Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
• Optional leather gauntlet gloves for added protection of hands and wrists.
• Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
• Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
• Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
• Designed to meet the most stringent government guidelines.
• Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
• Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
• Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
• Comfortable ‘breathable’ cotton back.
• Adjustable wrist and ankle straps.
• Front press stud and Velcro strip fastening.
• Most commonly used when blasting with steel grit media.
• Sold individually.

• Use at entry-exit points and around the site perimeter
• Alert and warn personnel of danger
• Durable Colorbond metal
• Large 24″ x 18″ (600 mm x 450 mm) size
• Bold colors and clear message (printed 1 side only)
• Pre-punched fixing holes for wiring the sign onto a fence or mounting it onto a swing stand frame
• Signs have small rounded corners for safe handling
• Customized warning message texts available contact BlastOne

• GVS Half Mask are some of the worlds most comfortable masks
• Extremely lightweight mask that adapt perfectly to the face, without hindering the user
• Snug-Fit™ design provides an enhanced comfort to the breather
• P3 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
• Long lasting cartridges due to high carbon material
• The high breathing flowrate design uses pleated filters to reduce the risk of user fatigue
• GVS masks are hypoallergenic, made from scent-free, medical grade materials, which are free from latex and silicone, and come with an easy to adjust head band
• Filters are installed and mask comes ready to use
• Medium/Large size suits 80% of workers

The “Kleen Cut Blast Hose Cutting Tool” (SKU: HFKCT100) is designed for precision cutting of rubber hoses up to 2 ½” (65 mm) diameter. Ensure a clean, square cut for prolonged coupling life and minimized pressure loss.

• Cuts rubber hoses up to 2½’ (65 mm) diameter
• Progressive ratchet cutting action
• Enables hose to be cut clean and square – ensures longest coupling life and minimizes pressure loss
• Can buy replacement blades (HF KCT101)

• 2.0 cuft capacity will hold 140 kg of Garnet
• Ideal for small shops or occasional blasting
• Comes with Micro Valve Metering Valve
• Comes with moisture trap
• 1″ Piping

• High quality painter’s sandpaper roll
• For sanding painted surfaces

• Supplied with HF GMRL gasket fitted
• For HFSTC, HFATC, HFBTC – use HF CLP-1 thin type lock pins – not included
• HFBTC can also be fitted with optional urethane high-pressure gasket
• HFPTC is supplied with HF GPCG3 gasket fitted and contains an integral springlock pin
• Standard claw, standard bore coupling – compatible with other standard couplings
• Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2

AVAILABLE FOR RENTAL OR PURCHASE

With Western Technology’s impressive Kick-it-tough design, the Brick Light is built to withstand shocks and breakage like no other area light can handle!  Other featured highlights as follows:

• Explosion proof light head for use in hazardous locations. Fully explosion proof systems with rated plug and power box are available (C models) or save cost with the A model ordinary location power box and plug when the power box can be positioned outside the hazardous area.
• Brilliant 11,500 lumen 6000K daylight light color for large area-light coverage.
• Highly Flexible with many mounting options and multi-light configurations available, as well as various lengths of cable. Optional dimmer switch available too.
• Coming soon – Easier Serviceability – the Gen3 version has a field-replaceable power cable pigtail/end cap assembly.  (Gen 3 has a green pigtail, Gen 1 & 2 versions are black)

• Industrial spray tip with consistent spray pattern
• Black arrow top handle
• Large, tip-size marking on the handle
• Long life, liquid honed tip insert
• Factory tested
• Large port fluid entry for better flow and easier cleaning
• Features bottom nib for installing seal into tip guard
• Includes OneSeal one-piece gasket and seal
• Available in a large range of orifice sizes and fan widths 4050 psi rated

Designed with precision in mind, the DeFelsko® PosiPen® addresses the need for accurate thickness measurements of non-magnetic coatings like paint or galvanizing on steel substrates. It’s particularly useful for quality control processes, where accurate measurements are critical. The PosiPen® can be applied to various substrates, including metal, plastic, wood, and glass, making it a versatile […]

Designed for professionals in the coatings industry, the PosiTest® PT Pencil Hardness Test Kit is an essential tool for evaluating the durability of paint, lacquers, resins, and films. It comes with a comprehensive set of 14 quality graphite pencils, ranging from 6B (softest) to 6H (hardest), allowing for a broad spectrum of hardness testing. The […]

• Suits 6″ x 8″ Handway on Schmidt 3.5 and 6.5 Blast Pots
• SureFit Gasket for Handway is used to seal the pressure vessel to ensure there are no leaks
• Improved design.  Now comes with a lip that allows pre-positioning the gasket on the handway cover securely.
• Easier to install than the original flat-rubber gasket.  (Original version BA700000106 is still available at a slightly lower cost.)
• Sold Individually
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt

Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors.  Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)

• Three adaptors available with MPN’s shown, as follows:
  • HHDPCWIADPT – PCWI Adaptor
  • HHDTRADPT – Tinker & Rasor Adaptor
  • HHD266ADPT – 266 and 280 Adaptor

• For ferrous and nonferrous gauges
• Designed for precise measurements of coating thickness
• Compatible with both ferrous and nonferrous gauges
• Specifically designed for use with the DeFelsko Positector coating thickness gauge
• Offers a measurement range from 0 – 1500 microns
• High accuracy of 1500 microns ensures reliable readings
• Seamless integration with the new 456 gauge

Chicago Pneumatic range of inline filtration. Pre, Coalescence and Activated carbon range. Flow range between 25 – 1431 cfm. Pressure rating up to 16 bar (232psi).

The Sure-Fire Electric Deadman Remote Control Handle (SKU: P-DMWTXE) is a compact, hands-free electrically-operated tool. Available in 12V and 24V options, it’s designed for enhanced operational control. Note: Accessories like TwistLok plug and extension cable sold separately.

• Compact ‘hands-free’ design
• Ball and chain not included – operator must use as per instruction manual
• 12 Volt or 24 Volt electric operation
• 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
• Order TwistLok plug and/or extension cable separately

• Fits Nova 3 PAPR (powered air-purifying respirator) headgear
• Tinted inner lens suits the three-part lens system
• Ideal when interacting with high-intensity light sources
• Meets ANSI Z87.1 Standard
• Sold in packs of 10
• Genuine Parts – Manufactured by RPB® Safety

• Size: 1¼” (31.75 mm)
• Heavy duty long life media inlet nipple to prevent the top thread of the Metering Valve from wearing
• Pot Connector – Long Life

• Designed and manufactured to meet the current Spray Booth Standards- AS4114
• Most booths are customised to individual needs from modular constructions
• A controlled area for painting and not pumping fumes and overspray all over your workshop
• Can be supplied in panel form for easy assembly
• Large filter area with unique overspray handling techniques
• 12 month warranty

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs from modular constructions
• Consists of a full height water curtain
• Used for spray painting, powder coating and grinding
• 12 month warranty

• For analysis of chloride ions, ferrous ions and pH level
• Chloride Ion Detection Threshold: approx 40 ppm
• Ferrous Ion Detection Threshold: approx 3 ppm
• pH measurement range: 4 to 9 verified by color scale
• Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
• Surface Contamination Analysis Test (SCAT) Kit
• ‘Swab method’ used in accordance with AS1627-1, AS3894-6 Standard

• Safety Lens (16-810)
• Suits RPB Z-Link Respirator
• Anti-fog /anti-scratch to give the wearer long time clear vision
• Suitable for welding / grinding / painting / inspection
• Sold Individually

Genuine Parts – Manufactured by RPB Safety

• Operating pressure rating 40,000 psi
• Cleaning Rate of up to 80m2/hr
• 400mm Cleaning Width
• Requires 50 CFM Air Supply for Nozzle Rotation
• Includes vacuum port for connection to vacuum source

• Operating pressure at 40,000 psi
• Cleaning rate up to 55m2/hr
• Cleaning Path of 150 mm
• Only Weighs 9.1 kg
• Hand-held operation
• Attaches to the surface by vacuum

• MegaFlow heavy duty air supply bull hose
• Used supply the large volumes of air required for sandblasting
• Made from high-quality rubber compounds that are oil resistant
• Tuff, UV resistant outer cover ensures it doesn’t break down in the sun
• Nylon braiding to make it more flexible and easier to man-handle
• Rated to 300psi with 3:1 safety factor
• Fitted Bull Air Hoses also available

BlastOne offers a full selection of industrial fittings.  This group is the Brass Reducer Bushings.  Other information is as follows:  

• 1st dimension is the NPTF Male Pipe size 
• 2nd dimension is the NPTF Female Pipe size
• Operating Pressure Range:  1000 PSI
• Operating Temperature Range:  -54 to 121C

BlastOne offers a full selection of industrial fittings.  This group is the Hex Nipples.  Other information is as follows:  

• NPTF Male Threads
• Both standard and reducer versions available
• Operating Pressure Range:  1000 PSI
• Operating Temperature Range:  -54 to 121C 

• Manufactured cast haematite iron abrasive
• Grey, angular granules
• High performance, hard, sharp abrasive
• Used in airblast rooms
• Maintains sharp angular shape as it wears
• Can be recycled many times
• Packed in 25kg bags

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Blasting Robot
• Compatible for use on horizontal, overhead, and vertical surfaces
• Can operate upside down on steel surfaces via magnets
• Interchangeable applications (washing / hydroblasting / abrasive blasting)
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for compact working radius
• Reconditioned older VertiDrive models may be available for sale

Different packages available

The DeFelsko Shore Hardness Durometer measures indentation hardness of non-metallic materials. Handheld device measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges – Shore A and Shore D.

• Easily adjust measurement time with onscreen countdown and conform to national and international standards
• Auto Ignore mode will disregard hardness readings below 20 and above 90 per international standards
• Weatherproof. Solvent, acid, oil, water, and dust resistant
• Interchangeable with DeFelsko PosiTector platform – attach 50+ PosiTector probes to a single gauge body
• USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
• Certificate of Calibration showing traceability to NIST included (Long Form)
• Conforms to ASTM D2240, ISO 868/7267/7619 and DIN 53505

Application: Soft to hard materials such as soft rubber, elastomers, neoprene, silicone, etc. Measuring Range: 0 – 100 Shore A Accuracy: ± 1 Resolution: 0.1

The BlasterAll Premium Leather Blasting Gloves (SKU: P-NABLASTERALL) combine superior abrasion resistance, ANSI Cut Level 4 protection, and touchscreen compatibility for enhanced safety and convenience during blasting operations. Available in sizes XS to 2XL, these gloves provide unparalleled comfort and durability. 

Key Features:

• Leather exterior for excellent abrasion resistance
• Kevlar lining with ANSI Cut Level 4 protection
• 7-inch gauntlet for extended forearm coverage
• Touchscreen-compatible fingertips for device use
• Available in sizes XS to 2XL
• Coordinates with BlasterAll Coveralls for complete protection

• Replacement Pick up tube for Triton Pump
• 3/8″, 3″ hose including pick up tube

Confirm the accuracy and calibration of DeFelsko PosiTest AT Adhesion Testers with this laboratory-quality AT Verifier.

This device works on all pull-off adhesion testers including the AT-M mechanical and the AT-A automatic instrument versions with a range from 0-5000 psi.

MPN:  ATVERIFY

This 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.

• 10 pack of replacement filters designed for the PosiTector® DPM L

BlastOne offers all DeFelsko products, including testing instruments, their accessories, and related supplies.

This group of mechanical gauges use rare-earth cobalt magnets to manually measure coating thickness on ferrous substrates. Additional information:

• Simple.  Straightforward and able to be used in any orientation.
• Capable.  Scales available in both mils and microns, and in 2 thickness ranges.  Can measure coatings on cylindrical surfaces too.  Go / No-Go button can be set for rapid measurement.
• Sturdy.  Wear-resistant carbide probe and rugged housing for years of service.

• 1″ (25mm) Economy bristle
• Recommended to buy in 12 pack quantities

• Ideal for use on thin, soft coatings
• Pack includes 2 nylon foot rings, instruction card and clear plastic case
• Compatible with all PosiTector 6000 regular separate probes (FS, FTS, NS, NAS, FNS)
• Manufacturer part # PRBFOOTKIT-D

• Mount Kit includes 2 mounts and screws (NV3-727/8)
• Suits RPB Nova3 Blast Helmet
• Used to repair the helmet
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

EX LED FLOODLIGHT POWERFUL ATEX LED TECHNICAL SPEC

• Area of Classification: Zone 1 and 2 (gas), Zone 21 and 22 (dust)
• Voltage Options1: 2VAC/DC, 24VAC/DC, 42VAC/DC, 110VAC, 230VAC
• Frequency: 50/60Hz
• Operating Temperature: Ta -50°C to +55°C (Non-Linkable), Ta -20°C to +40°C (Linkable)
• Ingress Protection: IP66 & IP67
• Temperature Classification: T4
• Light Output: 5000 lumens
• Plug Options: ATX, CEAG, STAHL
• Socket Options: ATX, CEAG, STAHL
• Light Source: 24 LEDs
• Weight: 10.2kg (Non-linkable), 11.6kg (Linkable)
• Dimensions: 430 (w) x 230 (d) x 390mm (h) (Non-linkable), 430 (w) x 260 (d) x 390mm (h) (Linkable)
• Product Warranty: 5 years

Every BlastOne dehumidifier has the following features:

• Unit-mounted filters, options include:
  • 10% permanent washable 2″ thick industrial
  • 30% 2″ (standard) pleated throw away
  • 55% to 65% 4″ cartridge throw away
  • 99.97% HEPA 12″ cartridge
• G-90 16-gage galvanized double-wall construction with insulation
• Direct-fired natural-gas, electric or propane reactivation systems
• Cooling coil and heating coil options
• Skid or trailer mounted
• Full protective enclosure
• Integrated control system with 10-point operational function display
• Shipping covers for all inlets and outlets
• Packaged refrigeration system options
• Packaged generator system options

• LED Diesel Light Tower
• Auto start with light sensor & battery isolator

Breathing Air Filter Cartridge

• Suits Clemco AFC Breathing Air Filters (general mfr.)
• Replacement Air Filter Cartridge
• Air filter cartridges contain activated charcoal which means the unit must be changed every 3 months or 400 hours usage – whichever occurs first
• Carbon filter does not remove CO
• Sold Individually
• Commonly used for abrasive blasting/sandblasting operations
• Used for supplying breathing quality supplied air to sandblasting helmets/blast hoods

• Ready to measure right out of the package
• Up to 4X faster measurement speed as compared with previous generations
• No calibration adjustment required for most powders
• Ability to store up to 999 readings (with onscreen averaging) – the go-to choice for analyzing large areas
• Conforms to ASTM D7378

Maximize efficiency with the RotorBlast Internal Pipe Blasting Tool (SKU: IPC1000). Designed for pipes from 8″ to 36″ ID, this twin-nozzle, spinning blast head ensures thorough sandblasting, offering optimal results. 

• ADJUSTABLE CENTERING CARRIAGE SOLD SEPARATELY – IPC1200
• Twin nozzle, spinning internal pipe blasting system
• For sandblasting pipes 8″ to 36″ (200 mm – 900 mm) internal diameter
• Nozzles sold separately.  Note the following:
  • 2 nozzles are required for this unit.
  • Use the BNAT nozzles for use in pipes from 8″ to 11″ ID.
  • Use the BNASB nozzles for use in pipes from 12″ to 36″ ID.
• Note:  ID blasting equipment requires significant maintenance – contact us for details.

Introducing the Supersonic Tungsten Carbide Blast Nozzle (SKU: P-BNATLW) with a 1 ¼” throat entry and durable aluminum jacket – a contractor’s top choice for blasting efficiency.

• 2″ UNC (50 mm) coarse Contractor thread
• 1 ¼” (32 mm) wide throat entry, long venturi
• Tungsten carbide liner
• ‘The Original’ Contractor favourite
• Standard weight aluminum jacket and thread
• Use HF G32P nozzle washers

• Replacement Particulate filters to suit GVS Elipse P3 Mask
• Sold by the pair, you can order as many as you need, recommended purchase quantity is 30 pairs.
• Pallet Quantity of 3600 pairs
• Genuine Products – Manufactured by GVS

• Blast Nozzle Jumbo RotorBlast
• Jumbo RotorBlast Blast Nozzle Tungsten Carbide, 3/8″ (9.5mm) Orifice, Medium Thread
• Also fits spin blast / spinblaster

• Spring-Loaded Collar for Tri-Clover
• Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
• This is the version that is used on our GV2410320SPBV

• Welding ADF Rear Lens (16-873)
• Pack of 10

Genuine Product – Manufactured by RPB

• Replacement Pre Filter for the PX4 Powered-Air Purifying Respirator
• Genuine RPB product
• Comes in pack of 10

• 4 Hour Li-ion rechargable battery
• LED’s to achieve up to 650 Lumens with 5 unique light settings
• Comes with
  • L4 light complete kit
  • Battery recharger and power supply
  • Clip accessories to mount to the Nova 3 Helmet
  • Battery pack and belt
• Made by RPB Safety
• RPB Part #: 09-502-G

• 2125-100-08
• Replacement Urethane Sleeve for Old Style MicroValve

2765 Headlamp Intrinsically Safe, Ex Rated

• Built Pelican tough
• Hands-free design
• Night vision friendly
• Comfortable Cloth Strap
• Safety Certified – Class I, Division I
• Intrinsically Safe Head Lamp
• 2 colours available

Ensure the efficiency of your Schmidt® Blast Pot with the “Pop-Up Seating Ring” (SKU: BAP2100011). This Polyurethane ring is specifically designed for 3.5-20 cu.ft S-Series Blast Pots, ensuring a precise fit and optimal performance. 

Polyurethane Pop-Up Seating Ring

• 2100-011
• Large Pop-Up Seating Ring for 3.5-20 cu.ft S-Series Blast Pots
• RING ONLY

Hazardous Area Lighting – Portable & Rechargeable Area of Classification Zone 1 and 2 (gas), Zone 21 and 22 (dust) Specifications

• Operating Temperature: Ta -20°C to +43°C
• Ingress Protection: IP66
• Temperature Classification: T4
• Battery Duration: 6 Hour (Boost), 12 Hour (Standard)
• Light Output: 1250/2000 lumens
• Light Source: 24 LEDs
• Weight: 13.8kg
• Dimensions: 370mm (w) x 260mm (d) x 400mm (h)
• Product Warranty: 5 years (exc. battery)

• Solvent resistant plastic measuring jugs and buckets
• Ideal for measuring correct ratio of 2-component coatings when mixing small batches
• Measurement intervals and numbers are raised

• Repair Kit for Ultra Max II

• Brand: SureLock, 2-inch / 50mm Claw Clamp, ideal for sandblasting operations
• Secure hose to workpiece with two-jaw grip and a swiveling head
• Features a quick-release lever for easy operation
• Increases safety by preventing hose movement or disconnection during sandblasting
• Prevents operator contact with sandblasting media, protecting skin and eyes
• Enhances productivity by keeping the hose in place, allowing operators to focus on other tasks
• Reduces downtime by preventing hose damage
• SKU: FMSL50HC, a smart safety investment for those in the sandblasting industry

• Quickly connects one blast hose another blast hose
• Standard blast coupling claw, standard bore compatible with other couplings
• Reference the table below for the size to fit your blast hose
• Always use with coupling lock pins and blast hose whipchecks installed
• Available in Nylon, Brass or Aluminium
• Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6

Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations.  Polyurethane, steel, aluminum, etc. are also available and are lower in cost.

• Available configurations:
  • Contractor 50mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 32mm Fine Thread nozzles
    • Flange nozzles
  • Fine 32mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 50mm Contractor thread nozzles.  This is a BlastOne Exclusive!

Replacement side wings for the RPB® Nova 2000 AirFed Blast Helmet

Replacement Hub Assembly Spare Parts

• Includes Hub, tool, and necessary fasteners
• Refer to Description tab for technical details
• Genuine part – manufactured by MontiPower

• For use with Bristle Blasters
• Used to increase velocity of bristle movement
• Sold in packs of 5 bars
• Available in standard Carbon Steel or in Stainless
• Genuine part – manufactured by MontiPower

Ultra Filtration Dust Collector Filter Cartridges

• Filter Cartridge for Dust Collector
• Capped One End
• Cartridges to suit Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors

The DeFelsko Shore Hardness Durometer measures indentation hardness of non-metallic materials. Handheld device measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges – Shore A and Shore D.

• Easily adjust measurement time with onscreen countdown and conform to national and international standards
• Auto Ignore mode will disregard hardness readings below 20 and above 90 per international standards
• Weatherproof. Solvent, acid, oil, water, and dust resistant
• Interchangeable with DeFelsko PosiTector platform – attach 50+ PosiTector probes to a single gauge body
• Built in timer
• USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
• Certificate of Calibration showing traceability to NIST included (Long Form)
• Conforms to ASTM D2240, ISO 868/7267/7619 and DIN 53505

Application: Medium to extra hard materials such as hard rubber, epoxies, hard plastics, PVC, acrylic, etc. Measuring Range: 0 – 100 Shore D Accuracy: ± 1 Resolution: 0.1

• Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
• Offers full 360 degree coverage of pipe internals
• Self-propelled forward or reverse motion
• Can blast pipelines 1.2 – 3.6 meters in diameter
• Lowers labor costs as much as 75% compared with manual blast-pot operations
• Eliminates inconsistencies commonly found with manual blasting

• Reinforced, cloth tape with adhesive backing
• Use for sealing, masking, protecting
• Available in carton quantities
• Black color, other options available – contact BlastOne for details
• Available Widths:
  • 1″ (25 mm)
  • 2″ (48 mm)
  • 3″ (75 mm)
  • 4″ (100 mm)

• Sure Lock Bull Hose Coupling
• 2″ (50mm) Hose Tail sureLock

• Coupling for Sure lock
• Sure lock Coupling – 1-½ BSP(M)

• Refill kit for CSN Test Kit
• Used to measure surface contamination from Chlorides, Sulphates and Nitrates
• Comes in a Pack of 5 Tests
• Genuine Parts – Manufactured by ChlorRid

Schmidt abrasive blasting blast hopper hand way 

• Handway Complete Assembly
• crab, bolt, gasket and plate. Compatible: 6″ x 8″ Hand way on S-Series blast systems
• suits Schmidt abrasive blasting machines and Axxiom sandblast pots

• Xtreme Siphon Tube
• Diameter: 18″ x 1″
• Shape: Elbow

The Containment Sheeting Power Tie – Elasticated by BlastTies is a reusable bungee tie designed for fastening scaffold containment sheeting securely. Ideal for varying scaffold configurations, it features a puncture tip for sheeting penetration and a J-shaped toggle for secure attachment. 

Features:

• Reusable elastic bungee tie with puncture tip and J-shaped toggle
• Fastens scaffold sheeting, reinforced poly, and tarps securely
• Adaptable to different scaffold sizes and spacing
• Easy installation from inside the scaffold frame
• 100 ties per pack,

• Surelock Coupling Gaskets
• Pack of 10

• 2125-007-10
• Replacement 1 1/2″ x 1 1/4″ Hardened Base Nipple for Old Style MicroValve

2765 Headlamp Intrinsically Safe, Ex Rated

• Built Pelican tough
• Hands-free design
• Night vision friendly
• Comfortable Cloth Strap
• Safety Certified – Class I, Division I
• Intrinsically Safe Head Lamp
• 2 colours available

• Massive storage: up to 1,000 batches, and a total of up to 250,000 readings.
• WiFi Technology for wireless synchronization and automatic updates.
• USB and Bluetooth Data transfer options.
• Ability to store multiple data types in individual batches.
• Comes with Certificate of Calibration.
• Waterproof, solvent, acid, oil, and dust resistant.
• Simple, one-handed menu navigation.
• Versatile calibration adjustment options and unit conversion.
• Continual updates and alerts while measuring.
• Software solutions for comprehensive data analysis.
• Compatible with all PosiTector Probes.
• Manufactured by Defelsko.

The Water Induction Nozzle (aka WIN nozzle) is an economical way to enter the wet blasting market.  Commonly used in smaller projects, it offers excellent water flow control.  Additional Details:

• Use with standard dry blasting equipment.  No modifications required.
• Connects to standard garden hose, or you can use a tank with a standard 12v pump if you need to add rust inhibitor to the water. 
• Typically stocked with tungsten carbide liner and contractor threads, it is also available with silicon nitride liner and/or fine threads.  Contact us for details.

We have the accessories you need for your RPB respirators.  This unit mounts inside the helmet, helps protects your operators hearing, and mitigates the concern that they may not use ear plugs.

• Excellent noise reduction
• Designed for Z-Link/T-Link systems
• Easy adjustments
• Convenient foldable design
• Sleek and stylish appearance
• Includes HAZ18535 mounting bracket

• Suits the RPB® C40™ Climate Control Device (HLCCD3501)
• Manufacturer part number 03-521

• Defelsko’s Standard PosiTector Gage Body
• Can be used with all PosiTector Probes
• Standard Body Only – No Probe
• New Body stores up to 1000 readings
• Genuine Parts – Manufactured by Defelsko

• Suits the RPB Nova 3 and Nova 2000 Airfed Blast Helmet
• Inner Bib zips inside the helmet cape to prevent inward leakage of any dust or particles
• Provides a non-scratching seal around the blasters neck
• Can be easily removed and washed
• Sold individually
• Genuine Parts – Manufactured by RPB Safety

• Suits Nova 2000 Blast Helmet
• Genuine lenses are your only guarantee of safety – insist on them in your business
• Three-part lens system consists of:
  • Inner lens thick eye protection layer which meets ANSI Z87.1 standard
  • Outer lens Protects the more costly inner lens
  • Tear-off lens Allows for easy tear off with no down time. Contains a unique pre-folded tab to ensure that the blaster can only use one at a time
• Sold by the pack

• Will vacuum up to 12 ton/hour of garnet
• Requires 30cfm of air at 120 psi to operate
• Requires power of 125 amps / 415 volts to power electric vacuum motor
• 6 Dust Collector Cartridges with filtration area of 126 m2
• Automatic Reverse Pulse Cleaning

• Will vacuum upto 2 ton/hour
• Requires 350 cfm compressed air at 120 psi
• 1 Dust Collector Cartridge with filtration area of 21 m2
• Automatic Reverse Pulse Cleaning
• Use with 75mm vacuum hose

• Visor Kit includes hinge and latch (NV3-726)
• Suits RPB Nova3 Blast Helmet
• Used to repair the helmet, the visor most often breaks when blasters
  • Try to install too many lenses
  • Uses the visor as carrying device
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

• Kit includes L & R Side Padding Frames (NV3-731)
• Suits RPB Nova3 Blast Helmet
• Used to hold the side pads which encase the blasters ears
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

• Head liner clips are used to hold the head liner in the blast helmet
• Suits RPB Nova3 Blast Helmet
• Sold as a packet of 4

Genuine Parts – Manufactured by RPB Safety

• Abrasive holding capacity of 0.3 cu ft / 8.5 liters
• Blasting rate up to 2.0 m2 per hour
• Compressed Air Requirement 185 cfm
• On wheels for easy access. Includes fork pockets
• Recirculating compact blast & recovery unit
• 100% compressed air driven – no electricity required

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector SST Bresle disposable test patches require hypodermic needles for use.  These replacement needles come in a pack of 10 and are readily available here.

• IPC1009, RB-8 Replacement Double-seal Bearing
• For IPC1000 RotorBlast (2 required)
• Note:  2 of these are also included in Spare Parts Kit, IPC1099

• Suits GVS Integra half-mask w/goggles
• Protects goggles while spraying.  Remove and replace when needed to keep the goggle lens clear.  Save time over cleaning the goggles by hand!
• 10 peel-off visor lenses per pack
• Priced per pack.  5 packs per case.
• Genuine Parts – Manufactured by GVS

• Fits RPB Nylon Blast suits as well as BlasterAlls suits
• Genuine RPB Safety Part
• Price shown is per pair.

• Pack of 5 test kits
• Surface salt extraction efficiency up to 98%
• Measurement range 5 ppm to 200 ppm
• Used in accordance with ISO 8502-5, ISO 8502-6, ISO 8502-15 and AS 1627-4 Standards

• Generic Masking Tape
• Available in 1″, 1-1/2″, 2″
• Typically sold in Case Quantities

• Disposable ‘cup-style’ mask
• Latex free elastic head band
• Premium moulded design for a more comfortable fit
• Supplied in box packs
• Flat fold version individually wrapped
• Twin straps offer firm comfortable fit
• Suitable for grinding, sanding and dusty workplaces
• Certified to AS/NZS 1716

• Single Lipped MRL Rubber
• Compatible with Mega Max Couplings
• Large 1 3/4″ (45mm) Bore for maximum efficiency
• Pack of 10

Pipe fitters and maintenence workers routinely use these fittings in many applications.  Specifications and details as follows:

• Stocked in various sizes and lengths
• Schedule 40 galvanized for extended life
• Rated for 150 psi
• Sold individually

The RPB® Nylon-Fronted Blast Suit Coveralls (SKU: P-OPBNR) combine heavy-duty protection and breathable comfort for abrasive blasting operators. With a durable nylon front and breathable cotton back, this suit ensures optimal safety and performance in the harshest environments. 

Key Features:

• Heavy-duty nylon front for abrasion resistance
• Breathable cotton back to keep operators cool
• Elasticized waist, wrists, and adjustable ankle cuffs
• Triple-stitched construction for durability
• Available in sizes S to XXXXL
• Optional knee pads for added comfort

• ConeSpray with Carriage – for 5″-10″ (125mm – 250mm) ID pipe
• “Hollow cone’ spray pattern
• Includes spray tip, shut-off valve, centering carriage
• 3,600psi pressure rating
• Connects to high-pressure airless sprayer pump – not included
• Not suited to spray UHS (Ultra High Solids) paints

• Suits Manual Blow Down Blast Pots – Thompson Valve or Tera Valve Style
• Complete Conversion Kit to reduce sound to 110 dB
• Handles any abrasive that may be escaping out of the blast pot
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Goes on blast pot leg)
  • Blowdown Hose Assembly
  • Ball Valve and required fittings
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

The GVS / RPB PAPR units redefine what it means to be a powered air purifying respirator with comfort being a priority along with safety.  The 2 versions (PX5 and HX5) are very similar and both offer a long list of features.  A document comparing the PX5 vs the HX5 is under the Documents tab.  Features and benefits are as follows:

• Sleek and modern. Strategically distributes weight through it’s mounting.
• Light weight.  Weighing as little as 2.55 lbs, they are designed to fit comfortably for all-day use.
• Positive Pressure.  Removes the hassle and expense of fit testing and clean-shaven requirements.
• Comfortable.
  • The PX5 has 3 different air-flow speeds.
  • The HX5 has a single air-flow speed.
• Versatile.  Variety of PX5 filters and cartridges available for various applications including HEPA for particulates, as well as Organic Vapor (OV), Acid Gas (AG), and Multi-Gas.  The HX5 is compatible with the HEPA filter only.
• Safe.   They alarm when the battery is low and when the airflow is blocked.  The PX5 has visual, audible, and vibrating alarms, making them great for high-noise environments.  The HX5 has the visual and audible alarms only.  Both units are designed to prevent use if filter is not installed.
• Flexible.  Available in the following configurations:
  • Battery.  PX5 / HX5 PAPR batteries are available in standard or high capacities.
  • Mounts.  Available with a standard belt or an optional back-pack mount.
  • Ratings.  Available with an optional FR rating. Offers a spark arrestor insert to protect the filters while welding or grinding.
• Cleanable.  The PX5 ingress is certified to IP65 (light spray) and can be decontaminated easily.  The HX5 is certified to IP53 (wipe-down ).
• Easy-to-use.  Intuitive LED user interface indicates airflow, fan speed, and battery level.
• Portable.  Without an attached airline (or need for compressed air), these PAPR systems makes it easy to perform your work safely.

Note:  PAPR systems circulate filtered ambient air, and are not compatible with climate control devices or cool tubes. Additional Note:  Contact us before purchasing if product will be used in an explosive atmosphere.

• Hi-flow 1-¼”  Pusherline Kit includes
• 1-¼” ball valve
• 1-¼” Nut and tails with bolt style clamps for in-field installation

The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration.  As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle.  Details as follows:

• Performance:
  • The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level.  The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
• Liner:
  • The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
• Jacket:
  • Anodized aluminum with ergonomic shape makes for a very comfortable grip.
• Sizes:
  • Available in the following orifice sizes:  6, 7, 8, & 10
  • Overall length varies from 10″ to 13″, depending on orifice size.
• Thread type:
  • Available in standard 2″ Contractor thread only.  (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)

Note:  Inquire for details about our free trial offer.  

• Pre-engineered to minimize costs and ensure quick set up
• Typical max part size (to be blasted): 1.5m x .9m x 2.4m (W x H x L)
• Blasting chamber with set of double-doors
• Dust tight, high-powered LED lights in ceiling
• Shovel-in hopper, elevator and air classifier for basic abrasive recovery/recycling
• Includes abrasive storage hopper and high-performance sandblasting machine
• Separate personnel side access door (optional)

• Diesel Compressor with Polyethylene Canopy
• Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel and LED road lights
• Spillage free frame & AS1210 vessel including aftercooler and water separator
• Normal effective working pressure range from 7-12 bar (100-175 psi) Flow 80-180 cfm (38-88 L/s)

Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival.  Best practice and specifications determine when instruments should have their calibrations rechecked.

For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:

• B1.  Standard range Imperial.  Five steps (100, 200, 300, 400, and 500 mils).
• B1M.  Standard range Metric.  Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
• B2.  High range Imperial.  Eight steps (1″, 1.5″, 2″, 2.5″, 3″, 3.5″, 4″, and 4.5″).
• B2M.  High range Metric.  Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
• P.  (Use with PosiTector UTG P probe.)  Imperial labeled at 40, 60, 80, and 100 mils.  (Metric equivalent 1, 1.5, 2, and 2.5 mm)

The “Sundstrom Breathing Mask Pre-filter Holder” (SKU: NK5545) securely fastens pre-filters to Sundstrom half or full-face masks, extending cartridge life. Made of high-quality polypropylene, it’s designed for safety and longevity.

• Sundstrom Pre-filter Holder Pack of 5

• Replacement Seating Ring – Large
• Suits Clemco blast machines
• Pop-up valves sold separately
• Rings Sold Individually

AVAILABLE FOR RENTAL OR PURCHASE

• Wet sponge spark tester for metal and concrete substrates
• Test coatings up to 20 mil
• Has visual reassurance that the instrument is properly grounded
• Calibration Certificate shows traceability to NIST (Long Form) Included
• Two Year Warranty
• Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
• Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8″ x 8″ Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2′ of reach, universal adapters to extend existing paint rollers and poles, 40′ of ground wire, 15′ of hot wire, and magnetic grounding post

• Abrasion-resistant, flex-coated control cable
• 12 Volt rated for electric deadman controls
• 3-Pin Twistlock connectors used for all deadman cables
• 2-wire is used for Battery connections only
• Optional heavy duty cable for use with steel grit or other high wear areas

• Permanent or temporary mounting systems
• Ideal for setting up temporary blasting/painting facilities
• Supplied in modular kit for simple, quick installation (under a week)
• Fully relocatable easy to install and dismantle
• 100% Waterproof design
• Wind rating as per local requirements
• No concrete foundation necessary
• Compatible with optional abrasive recovery and dust collection equipment

• Modified High-cube-style shipping container construction (6m, 12m)
• Watertight, Weatherproof design
• Completely self-contained for maximum portability
• Simple setup/installation
• Partial abrasive recovery system, with shovel-in hopper
• Available as fully assembled unit or retrofit kit
• Instant Preliminary Quotes Available on Request!

• For blast and vacuum work with no abrasive recycling, when only virgin abrasive is to be used
• Blast up to 3.0 m2 per hour
• 1.0 cu ft / 28 litres abrasive capacity of blast vessel
• Minimum air supply of 200cfm/100psi is required to run this unit
• Excellent portability, plus the productivity benefits of pressure blasting
• 100% compressed air driven – no electricity required

AVAILABLE FOR RENTAL OR PURCHASE

• Tigerflex is the most preferred vacuum hose in the abrasive blasting market
• Has Anti-static properties to reduce static shock to the operators
• Special rubber compounds ensure high levels of abrasion resistance
• TigerFlex Vacuum hose is suitable for recovering and moving large quantities of abrasive abrasive blast media.
• Comes in many sizes, select your size

• Suits RPB Radex Breathing Air System
• Helps to remove moisture and hydrocarbons (Oil)
• Is mounted on the Breathing Air Filter Inlet before the pressure regulator
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

Power blasting gun

• Comes with with Abrasive Pick-Up Tube and Hose
• Comes with ¼’ Airjet and ½’ nozzle
• Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
• excellent for touchup blast projects
• compact and light for use at heights

The “Jumbo RotorBlast Blast Nozzle 5/16″ (SKU: BNASB15M) is a high-quality tungsten carbide nozzle, perfectly designed for RotorBlast internal pipe blasting with a 5/16” (8.0mm) orifice and medium thread.

• Blast Nozzle Jumbo RotorBlast
• Jumbo RotorBlast Blast Nozzle Tungsten Carbide, 5/16″ (8.0mm) Orifice, Medium Thread
• Also fits spin blast / spinblaster

The biggest revolution in Water Jetting! New precision engineered material grade tetraCORE diamond for optimised productivity and reduce operating cost for water jetting projects. Experience 10-15 times longer life than sapphire nozzles! tetraCORE diamond nozzles ensure:

• Up to 60,000 psi operating pressure
• Zero ID edge degradation over use
• Premium jet stream coherency & integrity
• Optimised jet stream length and consistency
• Maximised uptime and productivity
• 100% testing of all nozzles prior to shipping

GMA ToughBlast is our engineered blend for superior cleaning on tough jobs. High performance all-around garnet abrasive.

• Coating removal thickness: 380 – 760 ¼m
• Uniform surface profile: 70 – 90 ¼m
• Blasting rates: Up to 30 m²/hr
• Consumption rate: As low as 16kg/m²
• Dust factor: Low/Medium
• Recyclability: 4/10
• Mesh sizes: 16, 36
• MilSpec Approved Garnet Abrasive

• Operating Pressure 40,000 psi
• Cleaning rate up to 65m2/hr
• Cleaning Path is 250 mm
• Attaches to the surface via vacuum
• Comes with a winch system for fall arrest safety

• Precise motor controls for more consistent water jetting results.
• Can be operated “off the pad” on uneven ground
• Highly manoeuvrable in tight spaces.
• Lightweight and transportable.
• Less operator fatigue.
• Improved safety.
• Durable, worry-free rubber treads can traverse the most challenging environmental conditions.
• The hand-held remote package allows single-operator control from as far away as 700 feet.

• Conventional bleeder-type deadman control handle
• 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
• Large lever design
• Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

• Lightweight, portable, high efficiency fan
• Rated to 2000 cfm
• 12″ (300mm) fan
• Comes with Filter and Lubricator

The latest innovation in deadman safety technology from Axxiom is the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation.  The Schmidt BAABS deadman is such a leap forward in safety technology that Axxiom provides them as standard equipment with most new blast pot or valve retrofit purchases.*

All BAABS use the Axxiom G3 trigger deadman configurable as either electric or pneumatic.

All BAABS units are capable of being fitted with the BAABS blast light for improved vision in dim or dusty environments.  (Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

*The standard configuration provided with new equipment is the Compact size.  See Product Description tab for all size options.

• Sold as a pair
• Optimal Noise Reduction
• Enhanced Efficiency: Minimize distractions and increase productivity
• Durable Construction: Built to last with high-quality materials

The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators.  Refresh or expand your PX5 using the filters and cartridges available below:

• Pre-Filters.  Extend the life of the main filters using these.  10 per pack.
• Spark Arrestor.  Essential when using the PX5 in certain applications.
• HEPA Cartridge Filter.  The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
• Organic Vapor and Acid Gas Cartridge Filter.  (HE/OV/AG.)  Label Color Code Yellow/Magenta.  The painters favorite.  Approved for the following gases:
  • Solvents
  • Chlorine and Chlorine Dioxide
  • Hydrogen Chloride and Hydrogen Fluoride
  • Sulphur Dioxide
  • Organic Vapors
• Multi-Gas / HE Cartridge Filter.  Label Color Code Olive/Magenta.  Approved for all the same gases as the OV/AG filter plus the following:
  • Ammonia
  • Formaldehyde
  • Hydrogen Sulfide
  • Methylamine