Search: Schmidt MicroValve 1 Nipple 1-1/2 MNPT

• OEM replacement Body for the MicroValve® 1
• Schmidt® / Axxiom part # is 2125-000-06.

• 2125-007-10
• Replacement 1 1/2″ x 1 1/4″ Hardened Base Nipple for Old Style MicroValve

Schmidt changed the abrasive blasting industry when they introduced the MicroValve™.  Now known as the MicroValve I (or the Original Microvalve), it is still available although most pressure-release Schmidt pots now use the newer MicroValve III®.  

It features:

• Simple threaded screw-type metering
• Hardened steel threaded base nipple
• (The brass threaded coupling shown is available separately.)
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

• Coupling for Sure lock
• Surelock Coupling 1 1/2″ (38mm) Male BSP

Nozzle holder for blast hose 

• Connects the blast nozzle to the blast hose
• Choose your blast nozzle thread type;
  • 3/4″ Medium Mitey-Mite Thread
  • 1-1/4″ Industrial Fine Thread
  • 2″ Coarse Contractor Thread *Contractor Favourite*
• Reference the table below for the size to fit your blast hose
• Available in Nylon, Brass or Aluminium
• Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3

• Replacement silencers for the SnakeBite family of blast nozzles
• Up to 45% less operator fatigue
• Up to 16dB noise reduction
• 2 versions available
  • Standard Pressure Silencer effective between 90-110 psi
  • Low-Pressure Silencer effective between 70-90 psi

• 2152-000-10 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Replacement Urethane Seat for Thompson Valve 2 when using a Tungsten Carbide Plunger

• Claw Clamp
• 38mm (1 1/2”) Claw Clamp

• Base For Thompson Valve 2
• Replacement 1-½ Base Nipple for Thompson Valve 2
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-11

• Claw Clamp
• 38mm (1 1/2”) Claw Clamp

• Visual representation of rust and coating preparation grades on steel substrates
• Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
• Handy flip-top, wire bound, reference book
• Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
• Not a certified visual standard – use as a guide

Stainless Steel Shot

• Manufactured chronital stainless steel shot abrasive
• Can be recycled many times
• Stainless Steel Abrasives are also used in applications where there can be no ferrous contamination
• Used mainly in an air-blast application to create a specific desired finish or where a non-ferrous abrasive is required
• Sharp edges gradually round over as it wears
• Packed in 25kg bags
• Made by Vulkan Shot
• Grittal Stainless Steel Grit also available

• 2123-009-99
• Service Kit for the 1 1/2″ (38mm) High flow and 2″ (50mm) Auto Air Valve

• Will transform your blast pot into a pressure hold system
• Retrofit Kit includes:
  • Thompson Valve Series II with TC Sleeve
  • Full pusherline kit
  • Automatic air valve and all interconnecting hoses
  • Control line strainer and pneumatic control valve
• Response pneumatic deadman handle and Twinline

• OEM replacement Roll Pin for the MicroValve® 1.
• Holds the Knob to the Plunger
• Axxiom / Schmidt® part # is 2125-000-04.

• Genuine OEM Replacement Parts Kit (Seals Only) for MicroValve 3
• Sized at 1-1/4 x 1-1/2” (32 x 38mm), ideal for MicroValve 3 abrasive metering valve
• Included plunger seal to prevent abrasive media from leaking
• Polyurethane sleeve for protecting the plunger against wear and tear
• Included O-ring to effectively seal the valve and prevent leaks
• Ball seat for managing the flow of abrasive media
• Economical solution to prolong the lifespan of your MicroValve 3

The world’s quietest blast nozzle! Click for Buying Guide

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• Designed to optimise the use of GMA garnet
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

Act quick! Limited supply.

The Breather Vent is an essential component designed to prevent dust from entering the piston/cylinder top of the Thompson Valve II Metering Valve. Available in 1/8” NPT or 1/4″ NPT, this bronze silencer, brass strainer, and breather vent serves as an alternative replacement to Schmidt® 2152-000-17, or GV215200017. Sold individually, this Breather Vent ensures your system’s longevity and optimal performance by maintaining a clean operating environment.

• Suits Thompson® Valve II Metering Valve
• 1/8” NPT or 1/4″ NPT – Bronze Silencer / Brass Strainer / Breather Vent
• An alternative replacement to Schmidt® 2152-000-17, or GV215200017
• Used to keep dust out of the piston/cylinder top of the Thompson valve
• Sold Individually

• Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
• Used when an overhead hopper automatically feeds abrasive into a blast machine.
• Rugged stainless steel body, compact, isolated 2-bolt construction.
• Doubles blast machine refill cycle time.
• Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
• Set and forget – flow rates stay set where you put them.
• High wear, rugged plunger seal.
• Stainless steel body for long life.
• Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
• Fit a rebuild kit while the valve is still fitted to the blast machine.
• Sold individually.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

Revitalize your MicroValve 3 with the Schmidt MicroValve 3 Complete Rebuild Kit (SKU: GV212810099). This comprehensive OEM replacement kit, complete with plunger, ensures optimal functionality and extended valve life.

• OEM Rebuild Kit suit MicroValve 3 – Includes Plunger
• Schmidt / Axxiom part # 2128-100-99
• Includes: GV7011005060, 2127-000-05, GV214950006, GV212810008, GV212800015

• 1-1/4″ Inlet for Blast machines with 1-1/4″ piping
• Works in conjunction with the Exhaust valve to make a complete deadman system
• Recommended replacement is the Combo Valve System – DM2223RK00
• Alloy construction

• Will vacuum upto 2 ton/hour
• Requires 350 cfm compressed air at 120 psi
• 1 Dust Collector Cartridge with filtration area of 21 m2
• Automatic Reverse Pulse Cleaning
• Use with 75mm vacuum hose

• Size: 1¼” (31.75 mm)
• Heavy duty long life media inlet nipple to prevent the top thread of the Metering Valve from wearing
• Pot Connector – Long Life

The “Mitey-Mite 1.0 cuft Blast Machine” (SKU: BMS10) offers efficient and reliable spot blasting, packed in a compact size. With a 70 kg Garnet capacity and micro valve metering, it’s perfect for touch-ups.

• Smallest production style pot available
• The 1.0 cuft capacity will hold 70 kg of Garnet
• Ideal for in-plant or onsite touch up work
• Comes with Micro Valve Metering Valve
• Comes with moisture trap
• 1″ Piping

• Base for Thompson Valve 2
• Replacement 1-¼ Base Nipple for Thompson Valve 2
• 2152-000-15 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• OEM Replacement Plunger Seal for MicroValve™ 1 / Thompson® Valve I
• Schmidt® / Axxiom part # 2149-000-06

Upgrade your Combo valve system with the Aluminum Nozzle Holder & Blow Down Hose Adapter (SKU: HFANHE1). Expertly designed for a secure fit and built to last, it’s perfect for coupling with the BH20 replacement hose.

• Blowdown Hose Adapter
• Works with Combo valve system
• 1-1/4″ NPS Thread
• Use BH20 for blow down replacement hose

Introducing the Supersonic Tungsten Carbide Blast Nozzle (SKU: P-BNATLW) with a 1 ¼” throat entry and durable aluminum jacket – a contractor’s top choice for blasting efficiency.

• 2″ UNC (50 mm) coarse Contractor thread
• 1 ¼” (32 mm) wide throat entry, long venturi
• Tungsten carbide liner
• ‘The Original’ Contractor favourite
• Standard weight aluminum jacket and thread
• Use HF G32P nozzle washers

Steel Shot Abrasive in Australia

• Steel shot – manufactured hypereutectoid, metal spheres used in airless centrifugal wheel blast machines to clean foundry castings, surface polishing and shot peening
• Also used in portable trackblast airless wheel blast machines for concrete floor preparation, blasting ship decks and profiling
• Quality Steel Shot is very long lasting
• Steel Shot can be recycled many times
• Hardness: 40-50 HRc. Other hardness’s of steel shot are available on request
• Special, Stainless Steel Shot and High Hardness, Milspec (Military Specification Peening Steel Shot) specification shots available
• Manufactured to conform to: SAE J444, SAE J827, SFSA 20-66
• Steel Shot is packed in 25kg bags, drums or bulk bags
• BlastOne is a leading steel shot supplier in Australia & New Zealand

• Standard-length replacement Half-Nipple for Tri-Clover
• Part of main Tri-Clover Assembly (GV2410320 or GV2410320SP) – 2 nipples are required for this assembly
• Recommend replacing the O-ring when replacing these nipples – see part GV2410323
• Longer version also available – see part GV2410321L  – NOTE – The longer version is recommended when using the Tri-clover without the Union-End ball valve.

The Paint Spray Hose High Pressure Nipple Fittings (SKU: P-GR15) provide a durable solution to connect two hoses with female threads, rated at 7250 psi.

• High Pressure Nipple for use as a spray hose joiner
• Use to connect two spray hoses which have female threads
• Available as a straight nipple or reducing nipple
• 7250 psi rated
• 30 degree internal seat, both ends
• Sold Individually

• Wet blast or dry blast with a single unit
• Lightweight and most portable in the AmphiBlast family
• Minimal water usage (less than 1 pint / ½ litre per minute)
• Set and forget switching between machine modes
• Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
• Schmidt Tera Valve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
• Electric water pump provides high flow water during softwash or wash down
• Wide range of blasting pressure capabilities from 10 to 150 psi
• Toggle between wet blast, dry blast, and blow-off using a single control panel
• Can fit through a 24″ doorway with ease (even with the onboard tank)

• 2123-006-99
• Service Kit for the 1″ (25mm) Auto Air Valve.

The Bristle Blaster Kit is a portable surface preparation tool that combines the ability to produce an abrasive blasted finish with the high mobility and flexibility of a portable hand-held tool.

• Available in Cordless, Electric and Pneumatic models
• The hardened angled bristle wheels works at up to 10x the speed of a wire brush tool
• Portable surface conditioning kit ideal for small areas and touch up work
• Can get into tight corners and angles
• Achieves a surface roughness or profile of 40-120 microns with a finish similar to abrasive blasting, using hardened angled bristle wheels

NEW! Cordless Bristle Blaster now available!

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Increases productivity up to 800%
• Blasts up to 60 m² / 646 ft² per hour
• Compatible for use on horizontal, overhead and vertical surfaces
• Can operate upside down on steel surfaces via magnets
• Interchangeable applications(washing / hydroblasting / abrasive blasting)
• Does the blasting of 3 blasters
• Blasts incredible 1500 mm / 60″ pattern via multi-directional swing arm
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for compact working radius
• Powered by robust 70Vdc motors

• Seals Kit for MicroValve III
• Replacement Seals Kit for Old Style MicroValve
• Schmidt abrasive blasting equipment/ Axxiom Manufacturing part number  2125-100-98

• 2125-000-09
• Replacement Gasket for Old Style MicroValve

• Schmidt part number 2152-100-98
• Seal Repair Kit for Thompson Valve 2
• Compatible with units using the Urethane Sleeve

• Quickly connects one blast hose another blast hose
• Standard blast coupling claw, standard bore compatible with other couplings
• Reference the table below for the size to fit your blast hose
• Always use with coupling lock pins and blast hose whipchecks installed
• Available in Nylon, Brass or Aluminium
• Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6

The industry-proven Schmidt TeraValve™ XL metering valve is revolutionary in its ability to provide high performance abrasive metering while boasting an enhanced service life.

• Durable.  The XL (extended life) technology offers more durability – even when blasting with aggressive media like aluminum oxide or steel grit.
• Convenient.  No special modifications are required to swap an older pressure-hold valve (like the Thompson) to a Tera. Even older pressure-release pots can be upgraded with a TeraValve Retrofit Kit, as long as there is at least 6″ clearance from the bottom of the pot.
• Preferred.  BlastOne provides the Tera Valve as standard equipment on all new blast equipment.  In addition, we use them in our own rental fleet.

• Multi Purpose full face respirator for grinding, welding and painting
• Loved by Painting Contractors that have to do weld repairs to tanks before recoating
• Has a padding system that makes it move properly with your head
• Operates from either Supplied Air or via Back pack PAPR
• Approved as a Hard Hat (ANSI Z89.1)
• Multiple Capes available – Tychem QC (Good for Painting) Zytec FR (Good for Welding/Grinding)
• Has optional weld visor attachment
• Sold as a package – select your options
• Genuine Products – Manufactured by RPB Safety

*Most Popular Blast Pot*

• Manufactured by Schmidt to BlastOne specifications
• Valving system designed to have a maximum of 3psi pressure drop
• Specified Capacity (approx)
  • 6.5 cu ft / 185 litres
• Abrasive Capacity (approx)
  • Garnet – 430 kg
  • Steel Grit – 700 kg
• Pressure Rating: 150psi
• Includes: Moisture separator and inlet fitting

BlastOne has replacement parts for all Axxiom / Schmidt metering valves.  This group includes the various sizes of pipe nipples, at the bottom of the base.

• 19mm x 19mm (¾” x ¾”) (Axxiom part #: 2130-005-12)
• 25mm x 32mm (1″ x 1-¼”) (Axxiom part #: 2130-006-12)
•  32mm x  32mm (1-¼” x 1-¼”) (Axxiom part #: 2130-007-12)
• 38mm x 38mm (1-½” x 1-½”) (Axxiom part #: 2130-008-12)
• NEW – 51mm x 51mm (2″ x 2″) (Axxiom part #: 2130-009-12F), offers maximum flow for high volume applications, such as VertiDrive robot.
• Base of Hardened Steel for extended usability
• Genuine Schmidt® Product

• 2125-100-08
• Replacement Urethane Sleeve for Old Style MicroValve

• Schmidt part number 2152-000-98
• Replacement Seals Kit for the Thompson Valve 2
• Does not include the Tungsten Carbide Plunger
• Seals Only

EX 400VA TRANSFORMER ELECTRICAL POWER TECHNICAL SPEC

• Area of Classification: Zone 1 and 2 (Gas), Zone 21 and 22 (Dust)
• Input Voltage: 110VAC (16A Plug), 230VAC (16A Plug), 400VAC (32A Plug)
• Output Voltage: 12VAC (4 x sockets), 24VAC (4 x sockets), 110VAC (4 x sockets), 230VAC (4 x sockets)
• Frequency: 50/60Hz
• Operating Temperature: -20°C to +40°C
• Ingress Protection: IP66
• Temperature Classification: T4/T5
• Plug Options: ATX, CEAG, STAHL
• Socket Options: ATX, CEAG, STAHL
• Weight: 17kg
• Dimensions: 560mm x 460mm x 300mm
• Product Warranty: 1 year

• Suits MistBlaster
• Used to control the water flow to the nozzle, via the injector block
• Air Actuated 2-Way Valve
• SS T-Port Ball Valve 13mm, Spring Return
• Mist Blaster requires 2 Valves
• Sold Individually

• Coupling for Sure lock
• Surelock Coupling – 2″ BSP(F)

• Sure Lock Bull Hose Coupling
• 2″ (50mm) Hose Tail sureLock

Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve

BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:

• DMRMCATCS Abrasive Trap Screen (3)
• BA02013 O-Ring (2)
• Clean Screen Decal (Not available separately)
• DMRMCATCSG Gasket

NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.

Replacement Hub Assembly Spare Parts

• Includes Hub, tool, and necessary fasteners
• Refer to Description tab for technical details
• Genuine part – manufactured by MontiPower

• Suited for Airless Paint lines and equipment
• Rated to 7,250psi
• High Pressure Steel Plated Elbow
• Female NPT Swivel 6mm
• Male NPT Threaded End 6mm
• Sold Individually

• 2223-000-01
• Replacement Cap for Combo Valve

• Special twin blade head design
• Achieves proper effective mixing action
• Minimal air-entrainment
• Stainless steel construction
• Ring-bound blades for safe handling
• Available in 3 head sizes:
• small HS
• medium HS
• large PS

• Tungsten Carbide Plunger for Thompson Valve 2
• Replacement Tungsten Carbide Plunger for Thompson Valve 2
• 2152-000-07 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

Hazardous Area Lighting – Portable & Rechargeable Area of Classification Zone 1 and 2 (gas), Zone 21 and 22 (dust) Specifications

• Operating Temperature: Ta -20°C to +43°C
• Ingress Protection: IP66
• Temperature Classification: T4
• Battery Duration: 6 Hour (Boost), 12 Hour (Standard)
• Light Output: 1250/2000 lumens
• Light Source: 24 LEDs
• Weight: 13.8kg
• Dimensions: 370mm (w) x 260mm (d) x 400mm (h)
• Product Warranty: 5 years (exc. battery)

• Coupling Sure lock
• BlastOne Surelock Coupling – 2″ BSP(M)

• Brand: SureLock, 2-inch / 50mm Claw Clamp, ideal for sandblasting operations
• Secure hose to workpiece with two-jaw grip and a swiveling head
• Features a quick-release lever for easy operation
• Increases safety by preventing hose movement or disconnection during sandblasting
• Prevents operator contact with sandblasting media, protecting skin and eyes
• Enhances productivity by keeping the hose in place, allowing operators to focus on other tasks
• Reduces downtime by preventing hose damage
• SKU: FMSL50HC, a smart safety investment for those in the sandblasting industry

• Throat Seal Liquid
• Size: 1 quart (0.95 Ltr)
• Package: Bottle
• Prevents paint drying on the displacement rod and packings
• Check the pump throat and top up the liquid daily

FOR HIRE OR PURCHASE The Schmidt Bulk AmphiBlast combines the features of a MegaBlaster and dustless vapour abrasive blasting, and is the latest in technology and efficiency. The Bulk AmphiBlast has a super large capacity that allows 2-4 blasters to blast for 8 hours each without stopping to refill the blast pot and each blaster can choose independently if they want to dry blast, mist blast, Softwash^TM or blow down.

• Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
• Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces
• Bristle Length: 1 ½ (38mm)
• Compatible: BNV6

Pipe fitters and maintenence workers routinely use these fittings in many applications.  Specifications and details as follows:

• Stocked in various sizes and lengths
• Schedule 40 galvanized for extended life
• Rated for 150 psi
• Sold individually

• Probe only – purchase gage separately
• Ideal for the non-destructive measurement of coatings on concrete, fiberglass, etc.
• Utilizes proven ultrasound technology
• Refer to the Description tab below for measurement range, accuracy and minimum thickness layer

Discover the ProPaint Economy Pressure Pot (SKU: P-SMPA10) – a cost-effective solution for occasional use with a 2.5-gallon capacity, suitable for waterborne compositions.

• 2.5 gal (10 liter) Capacity
• Standard and agitated setups
• Waterborne compatible versions
• Other sizes and brands are available

• 10.0 cu ft Blast pot
• Manufactured by Schmidt to BlastOne unique specifications
• Single outlet Thompson Valve II abrasive metering valve
• Approx 670 kg garnet abrasive capacity
• Comes with pnuematic deadman handle and 20m of control hose
• Excellent for a blastroom application with 1-2 blasters
• Meets all Australian Standards

Ensure precise metering with the Schmidt Teravalve XL Seat (SKU: GV213000010) – an OEM replacement seat for the latest generation TeraValve Abrasive Metering Valve. Ideal for use with GMA Garnet and other abrasive medias.

• Replacement OEM Seat suit Teravalve XL
• One of the most common wear items, would suggest having a couple on hand
• Schmidt / Axxiom part # 2130-000-10

Blast pot pop-up valve

• 2100-010
• Shaft and Pop-Up Valve
• Very long lasting, hemispherical design seals at any angle – less chance of mis-alignment
• Manufactured from Ultra-Tuff Polyurethane
• Suited to 3.5-20 cu.ft S-Series Blast Pots

• Abrasive holding capacity of 3.5 cu ft / 100 litres
• Blasting rate up to 4.0 m² per hour
• Compressed Air Requirement 750 cfm
• On wheels for easy access. Includes fork pockets
• Recirculating full size blast & recovery unit
• 100% compressed air driven – no electricity required

• Cylinder for Thompson Valve 2
• Replacement Cylinder for Thompson Valve 2
• 2152-000-09 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• Coupling for Sure lock
• Sure lock Coupling – 1-½ BSP(M)

• Repair Kit for Thompson Valve 2
• Complete Repair Kit for Thompson Valve 2
• Includes the Tungsten Carbide Plunger
• Schmidt abrasive blasting/Axxiom Manufacturing part number 2152-000-99

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-18
• Replacement Spring Retainer O-Ring for Thompson Valve 2

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-21
• Replacement O-Ring for Tungsten Carbide Sleeve for Thompson Valve 2

• 2152-000-16 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Replacement Cap Gasket for Thompson Valve 2

• 2125-000-01
• Replacement Knob for Old Style MicroValve

• 2.0 cuft capacity will hold 140 kg of Garnet
• Ideal for small shops or occasional blasting
• Comes with Micro Valve Metering Valve
• Comes with moisture trap
• 1″ Piping

EX LED FLOODLIGHT POWERFUL ATEX LED TECHNICAL SPEC

• Area of Classification: Zone 1 and 2 (gas), Zone 21 and 22 (dust)
• Voltage Options1: 2VAC/DC, 24VAC/DC, 42VAC/DC, 110VAC, 230VAC
• Frequency: 50/60Hz
• Operating Temperature: Ta -50°C to +55°C (Non-Linkable), Ta -20°C to +40°C (Linkable)
• Ingress Protection: IP66 & IP67
• Temperature Classification: T4
• Light Output: 5000 lumens
• Plug Options: ATX, CEAG, STAHL
• Socket Options: ATX, CEAG, STAHL
• Light Source: 24 LEDs
• Weight: 10.2kg (Non-linkable), 11.6kg (Linkable)
• Dimensions: 430 (w) x 230 (d) x 390mm (h) (Non-linkable), 430 (w) x 260 (d) x 390mm (h) (Linkable)
• Product Warranty: 5 years

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-14
• Replacement Body for Thompson Valve 2

AVAILABLE FOR RENTAL OR PURCHASE

With Western Technology’s impressive Kick-it-tough design, the Brick Light is built to withstand shocks and breakage like no other area light can handle!  Other featured highlights as follows:

• Explosion proof light head for use in hazardous locations. Fully explosion proof systems with rated plug and power box are available (C models) or save cost with the A model ordinary location power box and plug when the power box can be positioned outside the hazardous area.
• Brilliant 11,500 lumen 6000K daylight light color for large area-light coverage.
• Highly Flexible with many mounting options and multi-light configurations available, as well as various lengths of cable. Optional dimmer switch available too.
• Coming soon – Easier Serviceability – the Gen3 version has a field-replaceable power cable pigtail/end cap assembly.  (Gen 3 has a green pigtail, Gen 1 & 2 versions are black)

• Inlet Strainer for Pick up Tube
• Inlet Strainer with 1″ thread Stainless Steel Suits Xtreme Pick up tube

The Brass Nut and Tails Female Pipe Coupling (FP x FP) is a high-quality machined brass fitting designed for hydraulic and pneumatic systems. Manufactured to meet SAE J530 and J531 standards, this pipe coupling can handle pressures up to 1,000 PSI and temperatures ranging from -54°C to +121°C. It’s ideal for industrial applications requiring durable, leak-proof connections.

Main Product Features: 

• Solid machined brass construction for enhanced durability
• Female pipe coupling (FP x FP) design
• Performs to SAE J530 and J531 standards Working pressure: 1,000 PSI; Burst pressure: 4,000 PSI
• Temperature range: -54°C to +121°C
• Compatible with hydraulic and pneumatic systems
• Ideal for high-pressure applications in fluid transfer

• 100 psi max fluid output pressure
• 8 gallon (30 liter) max free flow
• Aluminum pump with fluid re-circulation valve
• (10 mm) fluid outlet
• High flow air regulators
• Comes with 1.4 mm AirPro Spray Gun and 7.5 m of Twin Air/Paint Hose
• Available as Pail Mount, Stand Mount or Cart Mount

• Inlet Strainer
• Inlet Strainer with 1″ thread Stainless Steel Suits Xtreme Pick up tube

Maximize efficiency with the RotorBlast Internal Pipe Blasting Tool (SKU: IPC1000). Designed for pipes from 8″ to 36″ ID, this twin-nozzle, spinning blast head ensures thorough sandblasting, offering optimal results. 

• ADJUSTABLE CENTERING CARRIAGE SOLD SEPARATELY – IPC1200
• Twin nozzle, spinning internal pipe blasting system
• For sandblasting pipes 8″ to 36″ (200 mm – 900 mm) internal diameter
• Nozzles sold separately.  Note the following:
  • 2 nozzles are required for this unit.
  • Use the BNAT nozzles for use in pipes from 8″ to 11″ ID.
  • Use the BNASB nozzles for use in pipes from 12″ to 36″ ID.
• Note:  ID blasting equipment requires significant maintenance – contact us for details.

Upgrade your Radex airline filter with the precision-engineered “RPB Radex Air Pressure Gauge.” Made with top-notch specifications to ensure reliable and consistent performance:

• Specifically designed as a Radex airline filter component
• Compact 40mm design for a perfect fit
• Optimized to measure up to 145psi
• Features a 1/8″ fitting for versatility
• Ideal replacement for part APF3013
• Official RPB part (001-00126) ensuring quality and compatibility

Choose the RPB Radex Air Pressure Gauge for dependable measurements and longevity in your airline filtering system.

• Manufactured cast steel abrasive
• Used mainly in airless wheel blast machines
• Blue grey, angular granules (GL = blue, GH = grey)
• Can be recycled many times
• High performance, cleaning and descaling abrasive
• Sharp edges gradually round over as it wears
• Standard GL and GH hardness grit
• Special GP hardness and other specifications available
• Manufactured to conform to: SAE J444, SAE J1993, SFSA 20-66
• Hardness: GL = 56-60 HRc, GH = 60-65 HRc
• Packed in 25kg bags

• Use with 1/2″ to 1-1/2″ nut & tail hose couplings
• General purpose double bolt hose clamps
• Two bolt, split-collar clamp with claw
• Sold individually

• Replacement OEM Plunger Seal suit TeraValve XL
• Pack of 10
• Schmidt / Axxiom Part # 2130-000-08

• Designed for high production applications
• 5:1 Pump Ratio
• Typically used as a solvent flush pump
• Pneumatic 2-ball piston pump
• Maximum Flow Rate 7.9 litres/minute (2.1 GPM)

• Incorporates abrasive shut-off ball valve and barrel union disconnector
• Suits 1 1/4″ (32 mm) threaded valves and pots
• Requires approximately 6″ (150 mm) extra clearance beneath the pot outlet
• Use thread sealant tape or compound to ensure an airtight connection

ATEX LED COMPACT FLOODLIGHT Specifications

• Area of Classification: Zone 1 and 2 (gas), Zone 21 and 22 (dust)
• Voltage Options: 12VAC/DC, 24VAC/DC, 42VAC/DC, 110VAC/DC, 230VAC/DC
• Frequency: 50/60Hz
• Operating Temperature: Ta -50°C to +55°C
• Ingress Protection: IP66 & IP67
• Temperature Classification: T4
• Light Output: 2500 lumens
• Plug Options: ATX, CEAG, STAHL
• Socket Options: ATX, CEAG, STAHL
• Light Source: 12 LEDs
• Weight: 7.2kg
• Dimensions: 340mm (w) x 220mm (d) x 390mm (h)
• Product Warranty: 5 years

• 2″ (50mm) Premium bristle
• Bristle angle machined into timber handle helps durability
• Recommended to buy in 12 pack quantities

• Ideal for blasting penstocks, tunnels, pipelines, wind towers, etc.
• Offers full 360 degree coverage of pipe internals
• Self-propelled forward or reverse motion
• Can blast pipelines 1.2 – 3.6 meters in diameter
• Lowers labor costs as much as 75% compared with manual blast-pot operations
• Eliminates inconsistencies commonly found with manual blasting

Features:

• Two x 2” ports, unfitted
• Four x 1” ports, unfitted
• One x ¼” drain port, valve fitted
• Female BSP threaded ports

Certified to AS1210 – 150 psi

• 1″ (25mm) Economy bristle
• Recommended to buy in 12 pack quantities

• MegaFlow heavy duty air supply hose
• 20 metre coil
• 2 inch internal diameter
• 300 psi pressure rated with 3:1 safety factor
• Supersynthetic oil resistant liner, durable UV resistant wrapped outer cover
• Temperature range: -22°F (-30°C) to +158°F (+70°C)

• 7.5 metre cable with alligator clips
• Connects directly to a battery to supply 12 volt power for deadman controls
• Deadman cable is fitted with a 2-Pin TwistLok plug connector for connecting to Deadman controls on the blast pot

• 48:1 pump ratio – 100 psi inlet pressure will deliver 4800 psi spray pressure
• Lower size is 75cc
• Ideal for touch-ups or other smaller projects
• Consistent spray pattern
• Multiple gun capabilities
• Handles a wide range of fluids
• Compact design fits into tight areas
• Ideal for applications such as steel fabrication, marine, rail, industrial and structural steel

• Suits Warrior 4000 Conventional Sprayer
• Diaphragm Repair Kit
• Long Lasting, high quality parts
  • 2 Diaphragms
  • 4 nylon check ball seats
• Sold as a Kit

BlastOne offers a full selection of industrial fittings.  This group is the Hex Nipples.  Other information is as follows:  

• NPTF Male Threads
• Both standard and reducer versions available
• Operating Pressure Range:  1000 PSI
• Operating Temperature Range:  -54 to 121C 

• Manufactured by Schmidt Abrasive Blasting & Axxiom Manufacturing to BlastOne specifications
• Valving system designed to have a maximum of 3psi pressure drop
• Specified Capacity (approx)
  • 3.5 cu ft / 99 litres
  • Abrasive Capacity (approx)
  • Garnet – 230 kg
  • Steel Grit – 390 kg
• Pressure Rating: 150psi
• Includes: Moisture separator and inlet fitting

The Testex tape process of measuring surface profile has been used for over 50 years.  It is a simple, reliable, and repeatable way of determining surface profile parameters.  DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors.

DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging.  NOTE – the profile ranges are not entirely the same between them – their respective ranges are shown under the Product Description tab.

Tape options include the following:

• Conventional Testex Press-O-Film Tape grades.
  • Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
• Optical Grade Testex Press-O-Film Tape Grades
  • Use with PosiTector RTR 3D probe.  Provides surface data files (.sdf) that allow both 2D and 3D measurements.

• Full face, Airfed Painting Respirator
• Tychem QC Tyvek Hood is very simple to replace
• Bump Cap or Hard Hat options available
• Large viewing window with exceptional downward and peripheral vision, has the ability to add a light to give extra visibility
• Soft, breathable inner-bib and extra tuck-in collar
• Can use with optional ear muffs
• Choose your Air conditioner type
  • Constant airflow valve – no cooling
  • C40 will heat or cool the hood used with a breathing airline
  • PAPR is a portable belt mounted powered air unit
• Genuine Parts – Manufactured by RPB Safety

ONLINE SHOP LAUNCH OFFER: BUY ONE GRACO XTR7 SPRAY GUN AND GET A FREE AIRLESS WHIP HOSE! Added automatically to the cart.

Experience the Graco XTR+ Airless Paint Spray Guns, offering two pressure ratings, lightweight design, and exceptional spray patterns.

• Pressure options:
  • XTR5+, rated for 5000 PSI
  • XTR7+, rated for 7250 PSI
• Design options:
  • Oval or round handles
  • Two or four-finger triggers
• Package options:
  • No tip
  • Flat tip
  • XHD RAC Switch tip

• 20.0 cu ft Blast pot
• Manufactured by Schmidt to BlastOne unique specifications
• Dual outlet Thompson Valve II abrasive metering valves
• Approx 1350 kg garnet abrasive capacity
• Comes with two pneumatic deadman handles and two lengths of control hose
• Excellent for a blastroom application with 1-2 blasters
• Meets all Australian Standards

• Suits Schmidt’s Small blast pots
• Hemispherical Pop-up valve seals off the pot when pressurized
• Shaft is embedded in the urethane head
• Sold Individually
• Buy Pop-up Seating ring separately BAP2100000
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt®

• Abrasive holding capacity of 0.3 cu ft / 8.5 liters
• Blasting rate up to 2.0 m2 per hour
• Compressed Air Requirement 185 cfm
• On wheels for easy access. Includes fork pockets
• Recirculating compact blast & recovery unit
• 100% compressed air driven – no electricity required

• Single Lipped MRL Rubber
• Compatible with Mega Max Couplings
• Large 1 3/4″ (45mm) Bore for maximum efficiency
• Pack of 10

BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:

• ESCON 70/10 Motor Controller CCB4.0
• V400 WCS with Connector
• Harting Han-Eco Locking Lever (2)
• Gearbox 050 with Flange
• V400 Motor Assembly
• Relay Module
• Carabine Hook (2)
• Lock Pin SS D10-L40 (2)
• Lock Pin SS D12-L70 (2)
• Wearplate (2)
• Spring (6)
• Spring Holder Nut (12)
• Vacuum Pan Skirt

• Replacement Lower with Build-in Filter
• Retrofit an Xtreme pump lower to an existing old-style King or Bulldog air motor
• Improved performance especially with higher pressures 45:1 56:1 68:1 80:1 ratios
• Reduced solvent usage quicker and easier to flush
• Extended life component
• Fast, simplified servicing with quick knockdown intake valve and cylinder

Experience efficient painting with the Star Air Paint Spray Gun (SKU: P-SMXS770). An economical choice that’s lightweight, compact, and available in multiple fluid setup sizes.

• Low price, economy spray gun
• Lightweight and compact
• Available in fluid setup sizes 0.059″ (1.5 mm), 0.070″ (1.8 mm), 0.079″ (2.0 mm), 0.098″ (2.5 mm), 0.118″ (3.0 mm)

• Pipe Nipple for Thompson Valve
• Replacement 1-¼ Pipe Nipple for Old Style Thompson Valve
• 2149-007-15 H Schmidt abrasive blasting equipment / Axxiom Manufacturing part number

• OEM Rebuild Kit for TeraValve™ XL
• Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
• Schmidt® / Axxiom part # 2130-000-99
• Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010

• Replacement Tungsten Carbide Sleeve for TeraValve™ XL™
• Includes O-Ring & Internal Wipers
• Schmidt® / Axxiom part # 2130-000-07

The Sure-Fire Electric Deadman Remote Control Handle (SKU: P-DMWTXE) is a compact, hands-free electrically-operated tool. Available in 12V and 24V options, it’s designed for enhanced operational control. Note: Accessories like TwistLok plug and extension cable sold separately.

• Compact ‘hands-free’ design
• Ball and chain not included – operator must use as per instruction manual
• 12 Volt or 24 Volt electric operation
• 2-wire is standard or 3-position toggle switch for use with integrated remote abrasive cut-off switch
• Order TwistLok plug and/or extension cable separately

• Compatible with RPB Nova 2000 Blast Helmet
• Non-intrinsically safe design (IS available)
• Kit includes comfort side wings, quick disconnect cable, and PTT button
• Connects to most common 2-way radio systems
• Noise cancelling microphone for clear communication
• Easy-to-operate push-to-talk feature
• Optional chest harness available
• Supports unlimited operators
• Used in tanks, shipyards, and difficult access areas
• Genuine Product – Manufactured by RPB Safety

• OEM Replacement O-Ring for Thompson® Valve I
• Sits on the bottom of the Insert beneath the Tungsten Carbide Sleeve
• Schmidt® / Axxiom part # 2149-000-18

Ensure the efficiency of your Schmidt® Blast Pot with the “Pop-Up Seating Ring” (SKU: BAP2100011). This Polyurethane ring is specifically designed for 3.5-20 cu.ft S-Series Blast Pots, ensuring a precise fit and optimal performance. 

Polyurethane Pop-Up Seating Ring

• 2100-011
• Large Pop-Up Seating Ring for 3.5-20 cu.ft S-Series Blast Pots
• RING ONLY

• Manufactured cast haematite iron abrasive
• Grey, angular granules
• High performance, hard, sharp abrasive
• Used in airblast rooms
• Maintains sharp angular shape as it wears
• Can be recycled many times
• Packed in 25kg bags

• Leading Graco spray technology
• aka – King High Flow Sprayer
• 10,000 13inch Air Motor
• Ideal for large jobs that require a high-output sprayer
• Configured with the Graco XL air motor – the largest air motor Graco has ever built
• Handles the workload equivalent of multiple sprayers
• Includes: Integrated filter, heavy duty cart, air kit, siphon kit and hose/gun kit

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs from modular constructions
• Can incorporate any type of draft system
• Heavy duty door design ensures long life
• 12 month warranty

• OEM Replacement Urethane Sleeve for Thompson® Valve II
• OEM Replacement Tungsten Carbide Sleeve for Thompson® Valve II
• Tungsten Carbide Keyslot Thompson® Valve II
• Multi-Port Sleeve for Thompson® Valve II

• Head liner clips are used to hold the head liner in the blast helmet
• Suits RPB Nova3 Blast Helmet
• Sold as a packet of 4

Genuine Parts – Manufactured by RPB Safety

The Graco XHF Top Feed Airless Spray Gun is specifically designed to effectively spray high-viscosity paint and coatings. This makes it an ideal tool for professionals in industries such as automotive, construction, and manufacturing.

One of the standout features of the XHF Top Feed Gun is its ease of maintenance. Graco has designed this spray gun with convenience in mind, ensuring that users can easily clean and maintain the gun without any hassle. This not only saves time but also ensures that the gun remains in optimal working condition for longer periods of time.

In addition to its maintenance-friendly design, the XHF Top Feed Gun is also known for its ruggedness and reliability. Graco has engineered this spray gun to withstand the demands of heavy-duty usage, making it a durable and long-lasting tool for professionals. This reliability is especially crucial in industries where downtime can result in significant financial losses.
Furthermore, the XHF Top Feed Gun is equipped with advanced technology that ensures consistent spray patterns and high-quality finishes. This allows professionals to achieve precise and uniform coatings, enhancing the overall efficiency and effectiveness of their work.

Overall, the Graco XHF Top Feed Airless Spray Gun is a top-of-the-line tool that offers professionals the ability to efficiently and effectively spray high-viscosity paint and coatings. With its easy maintenance, ruggedness, and reliability, this spray gun is a trusted choice for professionals in a wide range of industries.

• Used for blasting pipes 3″-12″ Internal Diameter
• Uses tungsten carbide deflection head and 1/2″ throat nozzle
• Select the unit that will best match your Air Supply:
  • 1/2″ Throat Nozzle: 250 cfm
  • 5/8″ Throat Nozzle: 400 cfm
• Neither of these packages come with a transport carriage – Order Separately
  • Collar and Button 3″-5″ Pipes
  • Scissor Type 5″-12″ Pipes
• Successful Pipe Internal Projects require some specialist knowledge – contact our team for assistance

• Replacement Sleeve O-Rings for TeraValve™ XL™
• Pack of 10
• Schmidt® / Axxiom part # 2130-000-09

The latest innovation in deadman safety technology from Axxiom is the BAABS (Blasting Accessories and Assist Bracket System). Intended to be the safest deadman on the market, it mechanically prevents inadvertent activation.  The Schmidt BAABS deadman is such a leap forward in safety technology that Axxiom provides them as standard equipment with most new blast pot or valve retrofit purchases.*

All BAABS use the Axxiom G3 trigger deadman configurable as either electric or pneumatic.

All BAABS units are capable of being fitted with the BAABS blast light for improved vision in dim or dusty environments.  (Note:  When the light is used with the Subcompact BAABS, there is not room for the thrust brace.)

*The standard configuration provided with new equipment is the Compact size.  See Product Description tab for all size options.

• Bristle Length: 1 ½ (38mm)
• Compatible: BNV6
• Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
• Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces

• OEM Replacement Urethane Sleeve suit Thompson® Valve I
• Urethane composition means it’s high-wear in normal applications, but sometimes the only option for a recycled abrasive or super fine abrasive
• Schmidt® / Axxiom part # is 2149-100-13

• OEM Replacement Sleeve for Thompson® Valve I
• Tungsten Carbide construction means you get significantly improved wear life
• Not suited to superfine medias, or abrasive being recycled without a proper recycler – suggest Urethane Sleeve (GV214910013)
• Schmidt® / Axxiom part # 2149-000-13

Ensure safety with the Safety Whipcheck for Hose Connections (SKU: P-HFSCA). Designed for hoses from ½” to 3½”, these steel-constructed whipchecks restrain hoses during unexpected disconnections.

• Use of a safety whipcheck restraint is mandatory on all hoses
• Whip checks are of steel construction
• HF SCA-1 cable suits hoses ½” to 2 ½”
• For use on Blast hoses (15 mm to 60 mm) OD
• HF SCA-2 cable suits hoses 2″ to 3½”
• For use on blast and bull air hoses (45 mm to 90 mm) OD
• Whip Checks restrains hoses in the event of a failure or accidental disconnection

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 2 to 4 inch fan width (XHD1 series).  All other Graco XHD tip sizes are also available.
• In this group, the orifice sizes range from .007 to .039 inches (sizes 107 to 139)
• Ideal for use with industrial high solids and heavy duty coatings
• Heavy-duty carbide tip construction
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

• Inlet size 2″ (50 mm) female thread
• Outlet sizes: 2″ (50 mm) female thread – 1″ (25 mm) female thread – plugged (top outlet)
• Rated for up to 800 cfm airflow volume at 150 PSI
• Connected in-line close to blast machine
• Expansion flow-chamber design with internal stainless steel coalescer
• Highly effective moisture droplet removal for peak productive blasting with minimal pressure loss
• Supplied with manual drain valve
• Includes axle, wheels and handle
• Air fittings not included – specify and order separately

• Hold*Blast is a cost-effective flash rust prevention solution
• Environmentally safe and compatible with all coatings
• It is used to “Hold the Blast” to allow primer to be applied
• Added in low concentration (2-10%) to the ‘blast water’ to prevent flash rusting
• Ideal to mix with your water when wet blasting
• Compare to Hold*Tite 102!
• Sold in 5-gallon pails
• 32 pails ship on 1 pallet

• 3600 psi rated
• ComfortGrip grip handle and 2 finger trigger
• EasyAccess #60 filter inside handle (Use GR287032)
• Inbuilt high-pressure swivel
• Includes 517 RacX Tip and Base

• Replacement outer visor hinge lock for the Nova 3 Respirator helmet (NV3-727-2)
• No additional screws or hardware needed

Genuine Product – Manufactured by RPB

The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration.  As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle.  Details as follows:

• Performance:
  • The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level.  The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
• Liner:
  • The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
• Jacket:
  • Anodized aluminum with ergonomic shape makes for a very comfortable grip.
• Sizes:
  • Available in the following orifice sizes:  6, 7, 8, & 10
  • Overall length varies from 10″ to 13″, depending on orifice size.
• Thread type:
  • Available in standard 2″ Contractor thread only.  (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)

Note:  Inquire for details about our free trial offer.  

• For attaching couplers and nozzle holders to blast hoses
• Used in conjunction with a small amount of silicon to install couplings
• Domehead or Countersunk
• SEE Screw Selection CHART in Additional Information below for proper sizing
• Sold in packs of 200

Thickness standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified polystyrene blocks, intended for probes that measure thick coatings (60 mils / 1500 microns and up)

Select the Standard set that most closely matches the measuring range of your probe.  See selection chart under the Description tab.

The Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.

• Lightweight, ergonomic design for comfortable use.
• Length: 47 cm (collapsed) and up to 124 cm (extended)
• Secure ¼”-20 threaded mounting point for easy attachment.
• Optimized for use with the PosiTest® CMM Concrete Moisture Meter.
• Ideal for quick, large surface moisture evaluations.

Have a good pot that you hate to throw away?   The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process!  Details as follows:

• Your existing pot must be structurally sound and must have at least 150mm clearance below it.
• The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.  
  • Note:  Handway and pop-up components are available separately, if needed.  In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance).  See Related Products below.
• Retrofit kits are available in either pneumatic or electric and are offered in both 32mm and 38mm valve sizes.
• Installation instructions are included in the box (and under the Documents tab here).  If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.

The 360° internal pipe blasting nozzle is ideal for use when blast cleaning small interior pipes ranging in size from 65 – 125mm in diameter.

• Wear-resistant angle type blasting nozzle
• Made from tungsten carbide
• Up to 400 hours of blast life
• Aluminum thread, 50mm for NHP nozzle holder
• Aluminum jacket

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2152-000-25
• Vibration Disc for Thompson Valve 2

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-04
• Piston Seal for Thompson Valve
• Replacement Piston Seal for Old Style Thompson Valve

• Suits Pressure Release blowdown systems like the Combo/Micro Blast Pot
• Sound levels are quieted to 110 dB (at 100 psi)
• Safely reduces abrasive particles that can escape during blowdown
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Attaches to Combo Valve)
  • Any required fittings
  • Does not include a new Blow Down hose
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

• Graco Adapt Nipple for Xtreme Quick Knockoff
• Connects onto the bottom of the lower for the pick up tube with Quick Knock off fitting to attach to

• The most versatile, easy-to-regulate dry blast machine on the market
• 10-150psi blasting pressure range
• With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate “metering” of hard-to-flow abrasives like Soda and fine Garnets
• With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types – fine to coarse
• With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
• G2 pneumatic deadman control, 55′ twinline control hose, 55′ water line with wet blast attachment for dust suppression included with purchase
• Genuine Products – Manufactured by Axxiom Manufacturing – Schmidt®

• Tried and proven deadman controls now available in a trigger style option
• Reduces strain on the operator
• Great for smaller nozzles #3 to #6
• Available as electric or pneumatic deadman controls
• Sold Individually
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Service Kit for Response Deadman
• Service Kit for Pneumatic Response Deadman Handle

• 2152-000-05 Schmidt abrasive blasting equipment / Axxiom Manufacturing part number
• Piston for Thompson Valve 2

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 15cm Long and about 2.5cm round
• Use with a Filter Support which is inserted into the middle of the Filter
• #60 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• Use in place of discontinued item: GV215200006
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-500-06
• Plunger seal for Thompson Valve large bore
• Replacement black plunger seal for old-style Thompson Valve

Graco Z60 Package E-Xtreme Electric High Performance Airless Pump Includes Heavy Duty Cart, 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose, XTR704 Spray gun, XHD519 spray tip The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers. It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.

• Pre-engineered to minimize costs and ensure quick set up
• Typical max part size (to be blasted): 1.5m x .9m x 2.4m (W x H x L)
• Blasting chamber with set of double-doors
• Dust tight, high-powered LED lights in ceiling
• Shovel-in hopper, elevator and air classifier for basic abrasive recovery/recycling
• Includes abrasive storage hopper and high-performance sandblasting machine
• Separate personnel side access door (optional)

The “Twinline Pneumatic Deadman Control Hose” (SKU: AHRMS4020) is a durable, bonded twin rubber hose, color-coded for safety. Designed to BlastOne specifications, it offers 20 meters of length and comes standard with male-female threaded connectors.

• Bonded, heavy duty, twin rubber hose, color coded for safety
• Fitted standard with male-female threaded connectors
• 1/4″ (6 mm) connectors on ‘supply’ red hose
• 1/8″ (3 mm) connectors on ‘return’ green hose
• 20 metres length

• IPC1009, RB-8 Replacement Double-seal Bearing
• For IPC1000 RotorBlast (2 required)
• Note:  2 of these are also included in Spare Parts Kit, IPC1099

BULK BLAST POT

• Blast Bulk Pot capacity 75 cu ft / 2100 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 5 tonne Bulk Blaster
• Ideal for mounting to the back of a truck
• Comes with 2 Thompson Valve abrasive metering valves, can have upto 4
• Skid Mounted Mega Pot

• Dual Wheeled Trailer Mounted Blasting Package
• BMS6.5 blast machine with Thompson Valve outlet
• 400 cfm AirPrep Air Drier
• 375 cfm 150 psi diesel air compressor
• Breathing air filter
• Carbon monoxide alarm
• Tool box
• Hose rack
• Room for 1 skid of abrasive
• Dustless Vapor Blasting

RBP Z4 HELMET:

• The Ultimate Helmet for those in the Welding and Grinding industry
• Boasts RPB’s world first comfort padding.
• Approved safety lens (ANSI Z87.1)
• Lightweight helmet – only 28.4 ounces

BREATHING AIR OPTIONS (Please Specify)

• RPB PX4 Breathing Air System Part No: HAPX403901G
• RPB C40 Cool Air and Hot Air Tube Part No: HLCCD3501

• MegaFlow heavy duty air supply bull hose
• Used supply the large volumes of air required for sandblasting
• Made from high-quality rubber compounds that are oil resistant
• Tuff, UV resistant outer cover ensures it doesn’t break down in the sun
• Nylon braiding to make it more flexible and easier to man-handle
• Rated to 300psi with 3:1 safety factor
• Fitted Bull Air Hoses also available

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 4 to 6 inch fan width (XHD2 series).
• In this group, the orifice sizes range from .009 to .039 inches (sizes 209 to 239)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The PosiTector® DPM – DeFelsko’s solution for measurement of climatic conditions for industrial coating applications.  Versatile and capable, these environmental measuring instruments have the following highlights:

• Familiar.  Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
• Capable.  Measures and records environmental conditions including:
  • Relative Humidity (RH)
  • Air Temperature
  • Surface Temperature
  • Dew Point temperature
  • Surface/Dew Point Delta
  • Wind speed (one model only)
  • Wet-Bulb (when used with Advanced Bodies only)
• Configurable.  Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
  • DPM Integral, with direct-contact surface thermometer
  • DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
  • DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
    •  A liquid temperature probe, for measuring paint temperature prior to application
    • A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
  • DPMA Integral, with all standard features plus a wind-speed indicator
  • DPMD Cabled, with ½” NPT threads for insertion into pipe and other areas that can’t be accessed by other versions.

Note:  The PosiTector® DPM L is an autonomous version, and can be attached independently to steel for longer-term climatic condition recording.

OTK Crimp Hose Clamps offer a reliable solution to attach and seal hoses onto various fittings, such as barbs or nipples. Crafted for precision, these clamps ensure a tight fit, reducing the risk of leaks. Whether you’re working with a Twinline control hose or an AHB-10 breathing air hose, we’ve got the right size for you:

• For Twinline control hose: Use size 1113
• For AHB-10 breathing air hose: Use size 1518

• Replacement OEM Plunger for TeraValve™ XL
• Tungsten Carbide for long life
• Schmidt® / Axxiom part # 2130-000-06
• NOTE – this is included in the Extended Rebuild kit GV213000099

BULK BLASTER & MEGA BLASTER

• Bulk Blast Pot capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• Ultimate Bulk Mega blast machine for large onsite blasting contractors
• Comes with 4 Thompson Valve metering valves
• Mounted on a highway certified trailer

Thickness standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified Coated Metal Plates (one being a zero plate).  

Select the Standard set that most closely matches the measuring range of your probe.  See selection chart under the Description tab.

• The Premium Industry Standard AirDryer
• Uses Aftercooler design to cool the air for maximum moisture removal
• Pneumatic Fan motor
• Easy Maintenance
• Size based on the size of your compressor

• For use with Bristle Blasters
• Used to increase velocity of bristle movement
• Sold in packs of 5 bars
• Available in standard Carbon Steel or in Stainless
• Genuine part – manufactured by MontiPower

MOBILE DUST COLLECTOR FOR ABRASIVE BLASTING PROJECTS

• Available to Buy or Hire
• Ready availability all over Australia/New Zealand
• Diesel Powered, Optional to include Electric
• Come either Trailer Mounted or Skid Mounted
• Industry Leading Design
• Read our Dust Collector Buying Guide
• Used for Dust control while Sandblasting
• Most common sizes: 6,000cfm, 12,000cfm, 20,000cfm or 40,000cfm
• Portable dust extractor for site work
• Onsite Dust Collectors & Onsite Dust Ventilation
• Industrial Portable Dust Collectors

• Toggle Actuator for Pneumatic Remote Abrasive Cut-Off
• 3mm

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions.

MPN:  HHDHCBRSH5

Grit Suppression valve, 1″ 2497-706

• 1″ (25mm) Grit Suppression Valve
• For Use with 3.5-20cuft Blast Pots
• Allows maximum pressure fluctuation without back flow of dust and abrasive
• Greatly reduces the likelihood that abrasive gets into the control valves
• suits Schmidt abrasive blasting

• OEM Replacement Plunger suits Thompson® Valve I
• Wear surface is made of Tungsten Carbide for increased life
• Schmidt® / Axxiom part # is 2149-000-07

• Suits 6″ x 8″ Handway on Schmidt 3.5 and 6.5 Blast Pots
• SureFit Gasket for Handway is used to seal the pressure vessel to ensure there are no leaks
• Improved design.  Now comes with a lip that allows pre-positioning the gasket on the handway cover securely.
• Easier to install than the original flat-rubber gasket.  (Original version BA700000106 is still available at a slightly lower cost.)
• Sold Individually
• Genuine Parts – Manufactured by Axxiom Manufacturing/Schmidt

• 2229-000-99
• Service Kit for Pneumatic Control Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.

• The original Thompson® Valve invented by Bob Schmidt
• Suits a pressure hold system, which retains the pressure in the blast pot, until the deadman handle is depressed
• Meters the flow of blasting grit, garnet abrasive sand
• 3 Nipple size configurations:
  • 1 ¼ (32 mm) x 1 ¼ (32 mm)
  • 1 ½” (38 mm) x 1 ½” (38 mm)
  • 2″ (50 mm) x 2″ (50 mm)
• Threaded-plunger metering design with air actuated operation
• The Thompson® Valve is suitable for use with all approved blasting abrasives
• Fits most sand blast hoppers, blast pots or abrasive blasting machines
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

• Modular, portable 500 mm diameter fan
• Used for ventilating non-hazardous work areas
• Set-up as a stand-alone or ducted unit
• Air powered fan 10,000 cfm nominal air flow (requires 125-175 cfm compressed Air)
• Single phase electric fan 6,000 cfm nominal air flow
• Three phase electric fan 10,000 cfm nominal air flow
• Explosion proof (EXE) rated fan available approved to Class 1, Zone 1
• Use a dust sock filter bag accessory for control of visible, non-toxic, nuisance dust

• SOLD AS 1 PAIR
• Tough, rough-grain finish
• Abrasive resistant Kevlar threads provides longer life than normal ‘welding gloves’
• Generous length gauntlet for lower arm protection and soft cotton inner lining for comfort
• Manufactured by RPB Safety
• RPB Part #: 07-701

AVAILABLE FOR RENTAL OR PURCHASE

• #1 Nozzle Mounted Blast Light Preferred by Blasting Contractors
• Has 6 LED’s giving 1,325 lumens light output blast light
• Voltage range – 120 v AC or 12-28 v AC/DC
• Long lasting – the LED blast light lamps will last 20x the life of a halogen globe
• Can be hose mounted or hand-held
• Lights can be repaired but require sending them to factory

Replacement seating ring suits BlastOne’s Mitey Mite series 1.0 & 2.0 cubic foot capacity blast pots

• The ‘industry standard’ helmet
• Tough yet lightweight, quiet and comfortable
• Includes Leather cape with inner collar
• Optional head size adjustment kits
• Safety Approvals:
• AS/NZS 1716 – 2003 Approval No. 1974
• Meets ANSI Z89.1 Hard Hat Protection Standard and ANSI Z87.1 Eye Protection Standard
• Under test laboratory conditions, reports have noted a 20dB noise attenuation

BULKBLASTER / MEGABLASTER

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep mounted directly on the front of the MegaBlaster
• Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
• Skid or Trailer Mounted
• Hybrid Bulk Blaster with built-in Air Drier

• 1.5m insulated cable, coverts the PosiTest^® HHD to a wand-type instrument
• Not for voltages >15kV

• DFT Combo Gauge (ferrous and non-ferrous) measures non-magnetic coatings on all metals
• Most reliable, economical DFT Gage available
• Measuring range is 0 – 1000 microns
• Fast and responsive measurements up to 60 per minute
• Built in, Strong, wear-resistant, ruby-tipped probe
• Convenient size & compact coating thickness gauge
• Simple Reset feature when no zero reference is available
• Gauge comes complete with storage case, certified thickness shims, batteries
• Has a 2-year warranty

• Suits Graco King Xtreme and Maxlife Lowers
• Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
• Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
• Sold as a kit
• Genuine Parts – Manufactured by Graco

• Unfitted Blast Hose
• Superior quality, lightweight and highly flexible sandblasting hose
• Blast Hoses have anti-static, natural rubber liner
• Rated to minimum 175 psi – 3:1 safety factor
• Made to BlastOne Blast Hose specifications
• Robust TuffRap outer blasting hose cover
• Light Wall Blast Hose
• Commonly known as supa hose or supahose
• Fit with your choice of nozzle holder and couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly certificate is available upon request

• Thompson Valve TC Insert
• Compatible: Thompson Valve Tungsten Carbide Sleeve
• Type: Service Kit
• Replacement Tungsten Carbide Insert for Old Style Thompson Valve
• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-14

Adapts a contractor thread nozzle to a wet blasting nozzle.  More control than with a halo nozzle.

• Injects water internally into the abrasive / air stream
• Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
• Includes needle valve to optimize mixture
• Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow

• Ideal for use on thin, soft coatings
• Pack includes 2 nylon foot rings, instruction card and clear plastic case
• Compatible with all PosiTector 6000 regular separate probes (FS, FTS, NS, NAS, FNS)
• Manufacturer part # PRBFOOTKIT-D

the DeFelsko® PosiTector® 200 is a versatile coating thickness gauge for non-metal substrates. Utilizing advanced ultrasound technology, it non-destructively measures coatings on wood, concrete, plastic, and more. With models capable of measuring up to three layers with graphical representation, the PosiTector 200 is ready to measure with no calibration adjustment required for most applications.

• Non-destructive coating thickness measurement on non-metal substrates
• Ultrasound technology for precise readings
• 2.8″ impact-resistant color touchscreen and ergonomic design
• Weatherproof, dustproof, and water-resistant (IP65-rated)
• Interchangeable probe platform with other PosiTector probes
• Connectivity options including USB, WiFi, and Bluetooth
• NIST or PTB traceable Certificate of Calibration included
• Conforms to ASTM D6132 and ISO 2808 standards

• Supplied in a pack of 4 test kits
• Abrasive Chloride measurement range 1 ppm to 50 ppm
• Compact, portable, two minute field test
• Safe handling – no needles or syringes

Short nozzles with straight bore are made for close-range spot blasting. The blast pattern is small, making it ideal for cleaning small areas, railings, etc. Other details as follows:

• Fine thread, 1-¼” – 11-½” NPSM
• Available in sizes from #3 to #8
• Tungsten carbide liner

• 3-pin Quick connector
• ‘TwistLok’ action designed to prevent cables from accidentally disconnecting
• Panel mount available DM ECK100
• 3-Pin / 3-Prong Twistlok are most commonly used for deadman cable
• 2-Pin / 3-Prong Twistlok commonly used for Electric Power Supply
• Sold Individually

BlastOne carries all DeFelsko instruments, supplies, & accessories. This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included). The unit comes complete with the remote wand handle and a 5′ (1.5m) hot-wire cable.

• High Pressure Inline Swivel
• Pressure Rating: 7500psi; End: ¼ ; Connector: Female; End: ¼ Male
• Material: Teflon packed
• Common Inline swivel that is used between the Graco spray whip hose and the Graco spray gun

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-99
• Repair Kit for Thompson Valve
• Complete Repair kit for Old Style Thompson Valve including the Tungsten Carbide Plunger

The T200 Respirator is designed specially for the healthcare market and is also a good option for part-time industrial applications.  It offers:

• Large viewing window for exceptional downward and peripheral vison
• Adjustable sizing to ensure a customisable secure fit for all head shapes and sizes
• Moveable lens and airduct positioning to accommodate for facial features, optical aids, and loupes
• Available with two head suspension systems:
  • Bump Cap
  • Head Harness
• Various replacement cape styles include:
  • Tychem 2000 Face Seal (open ears – designed to use with stethoscopes)
  • Tychem 2000 Face Seal/hood (covers ears)
  • Tychem 2000 Full Hood (shoulder length)
  • Tychem 4000 Full Hood, with sealed seams for maximum protection
• Peel-off lenses available
• No fit testing required
• Deconable head suspension system and disposable hood
• Compatible with PAPR

• WATCH VIDEO IN THE IMAGE SLIDER
• Highest productivity hand-held blast nozzle available
• Over double the productivity of a #8 high-performance blast nozzle with less operator fatigue
• Half the thrust of other #10 blast nozzles available – Feels like you’re blasting with a #7 nozzle
• Up to 16dBA noise reduction – That’s 75% quieter!
• Ideal for blasting acres of steel such as storage tanks, bridges, and ship hulls
• Standard contractor nozzle inlet thread
• Delivers faster cleaning rates and increased profit by reducing project duration
• Requires 750cfm compressor
• FREE TRIAL AVAILABLE!

• Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
• Tangential flow and elementless design
• Minimal pressure loss for peak blasting productivity
• Supplied with manual drain valve
• Optional autodrain accessory available
• Male threaded inlet and outlet ports
• Inlet fitting or ball valve not supplied – order separately
• Specify Size – 250cfm or 400cfm, based on the size of your blast nozzle and compressor
• Includes internal stainless steel coalescer

• Comes in pack of 10 hoods
• Keeps the dust and overspray out of your hair
• Low cost, disposable design
• Elastic face opening
• Calico fabric

Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.

• Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
• Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
• OV / P100. Protects against organic vapors and particulates.
• Prefilters.  Optional filters designed to extend the life of the OV filter.  Requires filter holder kit as shown.

NOTE – This is the low-profile series. The standard-profile series is available. Genuine GVS product.

• Size: 5 Pack
• Sundstrom Pre-filters

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

• For testing air pressure at the nozzle
• Test kit includes:
  • Liquid filled stainless steel pressure gauge with dual pressure & efficiency scale
  • Four needles and instructions
• Protective leather bound case

• General purpose blend of Garnet Abrasive 
• Will achieve a 50-100 micron profile
• Typical consumption rate 320 kg/hr
• Typical blasting rate 15-20 m²/hr
• Inert, natural mineral
• Pinkish to reddish-brown, sub-rounded grains
• High performance, low dust abrasive
• Economical, single use abrasive which may also be recycled

Also known as Brown Fused Alumina, Brown Fused Aluminium Oxide Abrasive Media Is a Long Lasting and Sharp abrasive used for high-performance applications and general industry use. Aluminium oxide is very hard and aggressive and is commonly used for mixing with paint coatings for nonslip surfaces.

AVAILABLE FOR RENT OR PURCHASE

A Graco King Paint Sprayer Pump will easily spray:

• Medium to Ultra-high viscosity coatings
• Plural component coatings
• High build, high solids epoxy primers and coatings
• High build, high solids Polyurethane top coatings
• Waterborne coatings
• Fire retardant coatings
• Approved for hazardous locations

• 2223-000-99
• Full Repair Kit for the Combo Valve.

Burnishing tools facilitate accurate and easy use of Testex Press-O-Film replica tape.  Multiple types available, as follows:

• Stick-type.  Economical plastic, sold in packs of 10, these have 8mm round ends.  Use with all types of Testex tape.
• Burnishing ball.  Designed to use with optical grade tape, for use with the RTR 3D probe.
• High Accuracy tool.  Updated with a spring-loaded ball for the most consistent results.  Use with standard Testex tape.

BlastOne offers all parts and accessories for DeFelsko testing instruments.

This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12″ (305mm).  Multiple extensions can be connected together to further extend the reach.

MPN:  LPDEXTROD

• Suitable for lead paint projects with 6-20 men
• Has four showers, an airlock and larger change room.
• Has separate ‘Dirty’ entrance chamber and ‘Clean’ exit chamber
• Waste water filtration system and hot and cold showers
• A/C and heating Systems
• ‘Dirty’ room has HEPA (lead rated) negative air filtration

Small pop-up valve suits small ‘Mitey Mite’ blast machines

• Shaft 8mm OD
• Head 60mm OD

CONTAINMENT SHEETING

• Tough, triple layer construction scaffold sheeting
• Woven, scrim mesh reinforcing
• Anchor-strip bands run the full length of each roll of containment sheet
• Fixing point indicators every 4″ (100mm)
• Heat-sealable sheeting for joins/overlaps
• Flame retardant containment sheeting is recommended for jobsite safety
• Complies with British, European and US FR Flame Retardant standards
• Recommended for safety-critical installations such as occupied buildings, shipyards, offshore and petrochemical installations

Thickness Standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

These Plastic Shims (aka foils) are low-cost alternative to coated metal plates.  They are available in Certified (individual shims or full sets) and in Un-Certified sets.  Accuracy is somewhat less than metal plates and they are more sensitive to heat. They are intended for use over a Zero Plate, or over an uncoated substrate.

A set of un-certified plastic shims is included with most electronic DeFelsko coating thickness gauges.  Replacement sets and certified options are available here as follows:

• Un-Certified.  These are checked for accuracy within tolerance shown below at DeFelsko, but are not traceable to any standard. They come as a set of 5 only, in the following approximate thicknesses:
  • 25 microns / 1 mil (Orange), +- 20% accuracy
  • 50 microns / 2 mils (Red), +- 10% accuracy
  • 125 microns / 5 mils (Blue), +- 5% accuracy
  • 250 microns / 10 mils (Brown), +- 5% accuracy
  • 500 microns / 20 mils (Yellow), +- 5% accuracy
• Certified.  Includes certificate of calibration traceable to PTB and all are accurate to within 2 microns / 0.08 mils.  Available in the following thicknesses individually, or as a complete set of 8 shims:
  • 25 microns / 1 mil (Orange)
  • 50 microns / 2 mils (Red)
  • 75 microns / 3 mils (Green)
  • 125 microns / 5 mils (Blue)
  • 250 microns / 10 mils (Brown)
  • 500 microns / 20 mils (Yellow)
  • 1000 microns / 40 mils (White)
  • 1500 microns / 60 mils (Black)

Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival.  Best practice and specifications determine when instruments should have their calibrations rechecked.

For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:

• B1.  Standard range Imperial.  Five steps (100, 200, 300, 400, and 500 mils).
• B1M.  Standard range Metric.  Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
• B2.  High range Imperial.  Eight steps (1″, 1.5″, 2″, 2.5″, 3″, 3.5″, 4″, and 4.5″).
• B2M.  High range Metric.  Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
• P.  (Use with PosiTector UTG P probe.)  Imperial labeled at 40, 60, 80, and 100 mils.  (Metric equivalent 1, 1.5, 2, and 2.5 mm)

• Generic Masking Tape
• Available in 1″, 1-1/2″, 2″
• Typically sold in Case Quantities

• Wet blast or dry blast with a single unit
• Minimal water usage (less than 1 pint /½ litre per minute) with proprietary Schmidt M.I.S.T. technology that allows precise control of the amount of water injected into the air stream while blasting
• Set and forget switching between machine modes
• Abrasive tank is dry so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
• Industry-leading productivity and reliability from Schmidt abrasive blasting technology
• Schmidt Tera Valve XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
• Wide range of blasting pressure capabilities from 10 to 150 psi
• Toggle between wet blast, dry blast, and blow-off using a single control panel
• Increased portability

• Reinforced, cloth tape with adhesive backing
• Use for sealing, masking, protecting
• Available in carton quantities
• Black color, other options available – contact BlastOne for details
• Available Widths:
  • 1″ (25 mm)
  • 2″ (48 mm)
  • 3″ (75 mm)
  • 4″ (100 mm)

The DeFelsko Shore Hardness Durometer measures indentation hardness of non-metallic materials. Handheld device measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges – Shore A and Shore D.

• Easily adjust measurement time with onscreen countdown and conform to national and international standards
• Auto Ignore mode will disregard hardness readings below 20 and above 90 per international standards
• Weatherproof. Solvent, acid, oil, water, and dust resistant
• Interchangeable with DeFelsko PosiTector platform – attach 50+ PosiTector probes to a single gauge body
• Built in timer
• USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
• Certificate of Calibration showing traceability to NIST included (Long Form)
• Conforms to ASTM D2240, ISO 868/7267/7619 and DIN 53505

Application: Medium to extra hard materials such as hard rubber, epoxies, hard plastics, PVC, acrylic, etc. Measuring Range: 0 – 100 Shore D Accuracy: ± 1 Resolution: 0.1

The GVS / RPB PAPR units redefine what it means to be a powered air purifying respirator with comfort being a priority along with safety.  The 2 versions (PX5 and HX5) are very similar and both offer a long list of features.  A document comparing the PX5 vs the HX5 is under the Documents tab.  Features and benefits are as follows:

• Sleek and modern. Strategically distributes weight through it’s mounting.
• Light weight.  Weighing as little as 2.55 lbs, they are designed to fit comfortably for all-day use.
• Positive Pressure.  Removes the hassle and expense of fit testing and clean-shaven requirements.
• Comfortable.
  • The PX5 has 3 different air-flow speeds.
  • The HX5 has a single air-flow speed.
• Versatile.  Variety of PX5 filters and cartridges available for various applications including HEPA for particulates, as well as Organic Vapor (OV), Acid Gas (AG), and Multi-Gas.  The HX5 is compatible with the HEPA filter only.
• Safe.   They alarm when the battery is low and when the airflow is blocked.  The PX5 has visual, audible, and vibrating alarms, making them great for high-noise environments.  The HX5 has the visual and audible alarms only.  Both units are designed to prevent use if filter is not installed.
• Flexible.  Available in the following configurations:
  • Battery.  PX5 / HX5 PAPR batteries are available in standard or high capacities.
  • Mounts.  Available with a standard belt or an optional back-pack mount.
  • Ratings.  Available with an optional FR rating. Offers a spark arrestor insert to protect the filters while welding or grinding.
• Cleanable.  The PX5 ingress is certified to IP65 (light spray) and can be decontaminated easily.  The HX5 is certified to IP53 (wipe-down ).
• Easy-to-use.  Intuitive LED user interface indicates airflow, fan speed, and battery level.
• Portable.  Without an attached airline (or need for compressed air), these PAPR systems makes it easy to perform your work safely.

Note:  PAPR systems circulate filtered ambient air, and are not compatible with climate control devices or cool tubes. Additional Note:  Contact us before purchasing if product will be used in an explosive atmosphere.

• Replacement neck pad (NV3-735-1)
• Suitable for the Nova 3 Respirator helmet
• Sold in units of 1

Genuine Product – Manufactured by RPB

Replacement blast light lens

• Lens For Blast Light
• Lens: 2″ (50mm); Compatible: Blast Light
• 2″ Replacement Lens for BL3070 Blast Light (Nozzle Light)
• Suits abrasive blasting lights, including LED blast lights

The PosiTector UTG – DeFelsko’s solution for measurement of wall thicknesses of pipes, tanks, and more where access is limited to one side.  Here are some highlights of the highly capable DeFelsko ultrasonic thickness gage probe family:

• Familiar.  The UTG family of probes are interchangeable with the tried-and-true DeFelsko gage body platform.
• Capable.  Six different probe versions are available, depending on the requirements of the application.  The first four are standard corrosion single-echo probes designed for applications where the surface is unpainted (or has the paint removed.)
  • PRBUTGC:  Standard frequency 5mz transducer. Cabled.
  • PRBUTGCX:  Xtreme version of above with a braided stainless cable with strain relief for demanding use.
  • PRBUTGCA:  Same as above, except integral  non-cabled design. This version is ideal for one-handed use.
  • PRBUTGCLF.  Low-frequency 2.25mz transducer for attenuative materials like cast iron.  Standard cable.
• The following two models are both cabled, and can be used on either painted or non-painted substrates.
  • PRBUTGM:  5mz transducer with highly versatile single and multi-echo modes.  Single mode offers greater (up to 5 inches thick) measurement range, but should be used where paint has been removed.  Multi-echo mode does not require the paint to be removed and can measure walls up to 2.5 inches thick.  This version has a durable alumina wear face and is ideal for use on rough or blasted surfaces.
  • PRBUTGP: 15mz transducer offers high precision when measuring thin materials (up to .475 inch thick steel or up to .175 inch thick plastic).  It has automatic single / multi echo mode switching for use on painted or unpainted surfaces.  This probe can be used to measure thicknesses of plastic bottles, aircraft windows, thin-wall pipe, and much more.
• Configurable.  Any of the six probes can be configured in the following packages:
  • Probe only.  Use with your existing PosiTector gauge.
  • Standard PosiTector package with choice of probe.
  • Advanced PosiTector package with choice of probe.
  • Note:  All PosiTector UTG packages come with case, ultrasonic gel, calibration certificate,  and more.

Compare the features of the PosiTector Standard vs Advanced Body on their separate web page.

The DeFelsko Shore Hardness Durometer measures indentation hardness of non-metallic materials. Handheld device measures the indentation hardness of non-metallic materials. Two durometer models are available for different hardness ranges – Shore A and Shore D.

• Easily adjust measurement time with onscreen countdown and conform to national and international standards
• Auto Ignore mode will disregard hardness readings below 20 and above 90 per international standards
• Weatherproof. Solvent, acid, oil, water, and dust resistant
• Interchangeable with DeFelsko PosiTector platform – attach 50+ PosiTector probes to a single gauge body
• USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
• Certificate of Calibration showing traceability to NIST included (Long Form)
• Conforms to ASTM D2240, ISO 868/7267/7619 and DIN 53505

Application: Soft to hard materials such as soft rubber, elastomers, neoprene, silicone, etc. Measuring Range: 0 – 100 Shore A Accuracy: ± 1 Resolution: 0.1

The “Kleen Cut Blast Hose Cutting Tool” (SKU: HFKCT100) is designed for precision cutting of rubber hoses up to 2 ½” (65 mm) diameter. Ensure a clean, square cut for prolonged coupling life and minimized pressure loss.

• Cuts rubber hoses up to 2½’ (65 mm) diameter
• Progressive ratchet cutting action
• Enables hose to be cut clean and square – ensures longest coupling life and minimizes pressure loss
• Can buy replacement blades (HF KCT101)

The BlastOne Paint can and drum crusher for 1 to 30 litre cans and drums reduces waste volume of all your metal waste paint or product containers. Simple and safe operation using compressed air will crush all metal cans and drums. The waste metal could become a reusable resource instead of costly waste disposal expense

The DeFelsko® Adhesive Kit is meticulously put together to support professionals in the field of coating adhesion testing. At its core is the ResinLab EP11HT 2-Part Epoxy, known for its strong bonding capabilities and reliability across a variety of surfaces. Accompanied by an assortment of additional glue, mixing sticks, palettes, and cotton swabs, the kit […]

• The Nova 3 Blast Helmet is the industry #1 for operator comfort
• Has comfort padding inside like a motorcycle helmet, which means it distributes the weight evenly, and also turns with your head
• Gives up to 20dB noise attenuation
• NIOSH Safety Approval with a 1000 APF (assigned protection factor)
• Sold as a complete kit with the following variations: 
  • Cape Options: 
    • Standard Length Nylon Cape
    • Extended Nylon Cape
    • Standard Leather Cape
    • Extended Leather Cape
    • XL Blast Jacket
    • XXL Blast Jacket 
  • Climate Options: 
    • Supplied air offers: 
      • C40 Heating and Cooling
      • Cool Air Tube
      • Hot Air Tube
      • Air Control Valve
    • PAPR offers: 
      • Air Control Valve only
      • (PAPR version is intended for low dust applications such as pot tending, inspection, etc.)
• Genuine Products – Manufactured by RPB Safety

• High pressure airless hose
• 3:1 built-in safety factor
• Swivel nut female connectors for easy fitup connector locks up rigid when tightened
• Safety spring guards fitted to whip hose ends
• 3300 psi hose is nylon braid, others are steel braid

• For analysis of chloride ions, ferrous ions and pH level
• Chloride Ion Detection Threshold: approx 40 ppm
• Ferrous Ion Detection Threshold: approx 3 ppm
• pH measurement range: 4 to 9 verified by color scale
• Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
• Surface Contamination Analysis Test (SCAT) Kit
• ‘Swab method’ used in accordance with AS1627-1, AS3894-6 Standard

• Massive storage: up to 1,000 batches, and a total of up to 250,000 readings.
• WiFi Technology for wireless synchronization and automatic updates.
• USB and Bluetooth Data transfer options.
• Ability to store multiple data types in individual batches.
• Comes with Certificate of Calibration.
• Waterproof, solvent, acid, oil, and dust resistant.
• Simple, one-handed menu navigation.
• Versatile calibration adjustment options and unit conversion.
• Continual updates and alerts while measuring.
• Software solutions for comprehensive data analysis.
• Compatible with all PosiTector Probes.
• Manufactured by Defelsko.

Protect your hands with the Solvent Resistant Painting Gloves (SKU: P-NA703). Specifically designed for solvent handling, these lightweight gloves offer cut resistance and come in various sizes.

• Ideal for handling solvent
• Lightweight cut resistant EN388 rating 1
• Flock-lined and extremely versatile
• Sizes 6 (XS)  thru 11(XXL) available 

2765 Headlamp Intrinsically Safe, Ex Rated

• Built Pelican tough
• Hands-free design
• Night vision friendly
• Comfortable Cloth Strap
• Safety Certified – Class I, Division I
• Intrinsically Safe Head Lamp
• 2 colours available

• Capacity to hold 6 ton of Garnet
• Size capacity of 200 cubic foot
• 2 bottom outlets fitted with a slidegate shut off
• Loading port and an access hatch located in the top of the hopper

Easy Tear-away protection for RPB Spray Hood Respirator lenses.

Available options as follows:

• Single Tear-away lenses.  These are the most economical versions for standard industrial coatings applications.  These options comes in the following configurations:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version designed for the legacy T100 model, but which will work on all RPB spray hoods that do not have the optional in-helmet light.
• Cassette Lens system.  These are premium versions, designed for maximum clarity and convenience.  On time-critical spray projects, cassette lenses save valuable time by eliminating the need to stop and change lenses. These come 7 lenses per set, with 10 sets per pack as follows:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version for T200’s with face seal or any version not using the optional in-helmet light.

NOTE – the shorter versions will not cover the bottom of the lens area on the T200/T-Link full hoods, and should not be used when the optional light is used on the T-Link.

For industrial conventional painting applications, BlastOne stocks both OEM Graco and aftermarket hoses.  All configurations available.

• Suits Standard Aluminum and Brass Blast Hose Couplings
• High Pressure Version which lasts longer and withstands higher pressures
• Recommended when blasting with pressures over 120psi
• Single Lipped High Pressure Urethane
• 1-¼ (32mm) Bore Size
• Sold as a pack of 10

Short venturi nozzles are made for close-range blasting. The venturi allows the widest possible pattern in limited space environments. Other details as follows:

• Available in either Contractor thread (50mm) or Fine thread (1-¼”)
• Available in orifice sizes from #3 to #12
• Tungsten carbide liner
• Multiple jacket types available

Call / chat / email us if the version you are looking for is not shown.

• Suits the RPB GX4 Gas Monitor
• GX4 can simaltaneously monitor 4 different gasses
• Replacement cartridge come sealed and are factory calibrated for easy in-field installation
• Allows you to replace your sensors and be up to date without having to send your monitor into the factory for servicing.
• Sensors have a 2 year life from date of manufacture (unless prematurely fouled)
• Detects CO Carbon Monoxide, H2S Hydrogen Sulfide or O2 Oxygen giving you complete confidence in your breathing air
• Genuine Parts – Manufactured by RPB Safety

• Keeps Abrasive grit and dust out of the controls of your blast pot
• Helps maintain valve response and speed
• Extends valve seal life
• Must have essential for any blast pot.
• Easy to maintain and clean
• Uses a 90 micron bronze element
• 1/4″ inlet fittings

• Replacement gasket for the Nova 2000 Respirator helmet (NV2003)
• Sold in units of 1

Genuine Product – Manufactured by RPB

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 153mm Long and about 25mm round
• Use with a Filter Support which is inserted into the middle of the Filter
• #100 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

DeFelsko has done it again!  Now with an enhanced second version, their Dew Point Meter Logger instruments are award winners for remote monitoring of environmental conditions.

Both PosiTector DPML models offer the ability to continuously monitor climatic conditions remotely.  Both offer wireless connectivity to the PosiTector app.  Data from both is uploadable to PosiSoft for generating reports.  And now, the new DPML+ offers all the features of the original DPML, with 2 key upgrades, as follows:

• AAA battery power, providing enhanced recording time.
• WiFi enabled, offering continuous uploading of data to the PosiSoft software AND email alerts to users when climate conditions fall outside of user-defined limits.

Enjoy the greater peace-of-mind offered by the DeFelsko DPM-L series with autonomous recording and reporting of the climatic conditions over the life of your projects.

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 152mm Long and about 25mm round
• Use with a Filter Support which is inserted into the middle of the Filter
• #30 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• Operating pressure at 40,000 psi
• Cleaning rate up to 55m2/hr
• Cleaning Path of 150 mm
• Only Weighs 9.1 kg
• Hand-held operation
• Attaches to the surface by vacuum

• X-AIR and XAVS Diesel Compressors
• Silenced, single stage, oil injected screw element powered by a liquid cooled, six cylinder Caterpillar engine.
• Comes standard with AirXpert 2.0, OilXpert, new improved vessel design, Eco mode and Fleetlink telematics.
• Normal effective working pressure between 5 to 14 bar (72 – 150 psi).
• Flow between 1235 – 1136 cfm (583 – 536 L/s).

The “Standard Claw and Bore Metal Coupling Gaskets MRL” (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.

• Single Lipped MRL Rubber, Compatible: Standard Claw Metallic Couplings, 1-¼ (32mm) Bore Size, Pack 10
• Work great with blasting systems that blast at pressure over 80psi

Schmidt abrasive blasting blast hopper hand way 

• Handway Complete Assembly
• crab, bolt, gasket and plate. Compatible: 6″ x 8″ Hand way on S-Series blast systems
• suits Schmidt abrasive blasting machines and Axxiom sandblast pots

BlastOne offers all DeFelsko instruments and accessories on-line for easy access to operation manuals, ordering, and more.

This group of products are stand-alone voltage testers for the High Voltage Holiday Detectors.  Although the PosiTest® HHD units have built-in voltmeters with a traceable calibration certificate, other brands may not, and some standards call for standalone voltmeter verification.

Two versions are available, as follows:

• MPN: HHDVERIFY, for all Pulse-type holiday detectors in the range from 500 to 35,000 volts.
• MPN:  HHDCVERIFY, for all Continuous-type holiday detectors in the range from 500 to 30,000 volts.

Note:  Each unit comes ready-to-use with verifier, 1.8m (6 ft) ground wire, batteries, and more.

The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards.  The DeFelsko SST test probe is an easy and accurate way to conduct these tests.  Test patches are required to perform them and DeFelsko has multiple options, as follows:

• PosiPatch™.  This innovative product utilizes a reusable patch, held by a magnetic ring against the surface.  Available in 2 configurations:
  • Rigid ring.  Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
  • Flexible ring.  Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
  • Saves time and money vs. disposable patches.
  • Utilizes a plastic needle – no sharp hypodermic needles required!
• Latex Disposable.  The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
• Latex-Free Disposable.  Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.

Note:  Both disposable options from DeFelsko feature low-tack adhesive with TearGuard™ technology for easy patch removal.  No residue to clean from the surface when using any DeFelsko SST test patches!

• Solvent resistant plastic measuring jugs and buckets
• Ideal for measuring correct ratio of 2-component coatings when mixing small batches
• Measurement intervals and numbers are raised

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Used to make a dedicated painting area
• Compact design providing better airflow
• 1.0mm thick galvanised sheet metal work area
• Modular design, Simple screw-together construction
• 12 month warranty

• Used to extend the reach of a DeFelsko DFT Probe
• Increases your reach up to 1.24 metres
• Collapses to only 40 cm
• Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
• Probe is secured in the probe holder, which can easily articulate any direction
• Rubber grips for holding the DeFelsko® Gage
• Genuine Products – Manufactured by DeFelsko®

• Custom designed blasting and painting facilities, sized as large as application requires
• Ideal for new construction and repair, for vessels of all type and size
• Available configurations:
  • Hybrid blast/paint hall – single hall for both operations at different times
  • 2 separate halls – each single-purpose hall dedicated to blasting or painting
• Available with completely controllable environmental conditions to meet required specifications
• Compatible with abrasive recovery and recycling equipment with many available configurations

• Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2130-000-98
• Replacement Parts Kit (Seals Only) for TeraValve XL

2765 Headlamp Intrinsically Safe, Ex Rated

• Built Pelican tough
• Hands-free design
• Night vision friendly
• Comfortable Cloth Strap
• Safety Certified – Class I, Division I
• Intrinsically Safe Head Lamp
• 2 colours available

The PosiTest® AT series – DeFelsko’s answer for testing coating adhesion on multiple substrates.  Practical and capable, this product family offers a professional way to conform to recognized standards, including ASTM D4541 / D7234 and ISO 4624.  

Highlights are as follows:

• Multiple Versions:
  • Economical Manual hydraulic pump, with new display and internal memory holding up to 200 pulls. Compatible with PosiSoft Desktop.
  • Capable Automatic hydraulic pump, reduces user effort and risk of user influence on result.  Internal memory for up to 100,000 pulls in 1000 batches.   Compatible with PosiSoft Desktop, PosiSoft.net, and PosiTector app
• Versatile.  Both Manual and Automatic versions can be configured for 1 of 4 applications.  And optional conversion kits are available if switching from one application to another is needed.  Application options are:
  • 20mm, Higher bond strength coatings on metals
  • 50mm, Lower bond strength coatings on concrete, wood, and plastic
  • 50 x 50mm Tiles, Cementitious adhesives for tiles
  • 50mm C1583, Concrete surfaces and overlays
• Complete.  Each Adhesion Tester comes with everything needed for testing, including:
  • Selected Instrument
  • Dollies per option selected
  • Batteries
  • Lightweight case
  • Calibration certificate, and more!

Note:  Premium Pelican carrying case optionally available for the Automatic tester.  

PosiTest® AT replacement dollies and conversion kits (for using in additional applications) as well as additional PosiTest Adhesive tubes are all separately available.

• Suit Blast and Vac Workhead VCBV200
• Replacement inner brushes create a seal with the surface to capture dust and abrasive
• Internal flat brush, used in combination with Outer brush
• Sold Individually
• Bristle Length: 1 ½ (38mm)
• Compatible: BNV6
• Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
• Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces

• 2223-000-17
• Base for Combo Valve

• Rugged, compact design Auto Air inlet remote control valve for deadmen system
• Typically used in conjunction with the Thompson Valve
• Low pressure drop across valve increases production
• Also Known As – “Gatekeeper”
• Commonly used on Schmidt abrasive blasting and Axxiom Manufacturing abrasive blast machines and blasting pots

Many time-saving Vac Hose Fittings are available.  This group includes:

• Combination Nipples, to connect vacuum equipment to vacuum hose
• Barbed hose tail on one end, male thread on the other
• Made from zinc-plated steel (other types available)
• Easy to install and remove for hassle-free maintenance
• Single Sizes and Jump Sizes Available

Contact us for additional sizes / options.

• Industry Standard – Manufactured by Schmidt
• Compact, slimline design
• Light handle action – 30% easier then other handles to hold down
• Available as Electric or Pneumatic

FOR RENTAL OR PURCHASE

• Combination Skid – MistBlaster and AirDryer Package
• Capable of doing wet and dry blasting – ultimate flexibility for any job!
• 6.5 cu. ft. Schmidt Blast Pot with MistBlaster Conversion
• Teravalve XL Abrasive Metering Valve
• 400cfm Moisture Removal System (Select Deliquescent Air Dryer or Squat AfterCooler)
• 189 liter water tank & pump
• Select if you do or don’t want the Operator Accessories Kit (RPB Breathing air filter and  GX4 CO Monitor, 5cm Bull hose, 3.175cm SupaFlex Blast Hose, Nova 3 Blast Helmet, and #6 Blast Nozzle)

The DeFelsko® PosiTector Large V-Groove Adaptor is specifically designed to augment the PosiTector SPG OS model’s capabilities, particularly for professionals working with pipes of 30-45 cm (12-18 inches) in outer diameter. This accessory enhances the instrument’s stability during measurements, ensuring precise and reliable surface profile readings on larger pipes.  Key Features:  Enhanced Stability: Specifically engineered […]

Dust Collector Ducting

• 20″ (500 mm) Internal Diameter
• 10 metre length
• Heavy Duty with Wear Strips and Rope Tabs
• Tough coated membrane wrapping
• Spiral reinforcing ribs for suction applications
• ‘Concertinas’ for compact transportation and storage
• Can be used under negative or positive pressure
• can be used in mining applications

The RPB Nova Superflex Breathing Hose is designed for seamless connectivity to the air control valve or climate control tube. This replacement breathing air hose is engineered for both flexibility and silence, enhancing the blaster’s mobility and comfort by significantly reducing the noise of incoming air. Ideal for professionals seeking a quieter, more flexible solution for their respiratory protection needs.

• Designed specifically for the Nova 2000 Helmet Respirator
• Facilitates connection to air control valve or climate control tube
• Highly flexible hose allows for maximum movement
• Significantly silences the noise of incoming air for operator comfort
• Essential replacement part for maintaining respiratory protection efficiency

• Fitted Blast Hose
• Premium blast hose fitted with couplings only
• We have many ways to fit a blast hose
• For a Extension hose we recommend you use 4 ply type
• Fitted and Quality Controlled by BlastOne Trained Staff

Experience powerful and efficient garnet removal with the “Diesel Powered Skid Mounted Vacuum System – Vacuload Series 8” (SKU: VAVacuload8D). Designed for contractors on extended projects, this system can handle up to 12 tons/hour with optimal filtration.

• Will vacuum up to 12 ton/hour of garnet
• Requires 30cfm of air at 120 psi to operate
• Skid mounted, Diesel engine
• 6 Dust Collector Cartridges with filtration area of 126 m2
• Automatic Reverse Pulse Cleaning

The PosiTector IRT – DeFelsko’s solution for dedicated, non-contact temperature measurement.  It is rich in features, as follows:

• Familiar.  Built on the tried-and-true PosiTector® platform with the interchangeable probe design.
• Capable.  Works where conventional sensors cannot, it measures surface temperatures  on moving parts, hard-to-reach areas, and objects whose temperatures are higher than the range of direct-contact sensors.
• Economical.  When measurement of other climatic conditions is not required, this PosiTector IRT saves money vs. the higher-featured PosiTector DPM IR.
• Configurable.  Available as follows:
  • Probe-only (use with existing gauge / body)
  • Package with Standard gauge / body
  • Package with Advanced gauge / body

Note:  Each PosiTector package comes complete with probe, protective holster, choice of gage /body, calibration certificate, and more.

Recommended best practice when performing replica tape tests with PosiTector RTR instruments is to thoroughly clean the anvils (test surfaces) before performing the test.

These Cleaning Cards are premoistened with alcohol and are excellent for removing bits of adhesive and debris from the anvils. Each new RTR comes complete with 5 cleaning cards and additional quantities are available here as needed, in packs of 20.

The RPB Nova 2000 Blast Helmet with the Cape Cover Band is designed to ensure optimal protection during blasting operations. This cover band is specifically engineered to prevent dust and grit from entering the gap between the cape and the helmet, as well as keeping grit out of the press studs for easier reattachment after cleaning. Sold individually, this genuine part is manufactured by RPB Safety, guaranteeing compatibility and quality for your Nova 2000 helmet.

• Designed exclusively for the RPB Nova 2000 Blast Helmet
• Prevents dust and grit penetration for enhanced protection
• Keeps press studs free of grit for easy cape reattachment
• Sold individually for convenience
• Genuine RPB Safety manufactured part ensures quality and compatibility

Loading fixtures, stubs for adhesion testing.

• Sizes from 10mm-50mm (20mm dollies are standard)
• Concrete adhesion tester accessory kit uses 50mm dolly
• Order glue separately

• Heavy-duty leather front for protection of arms and legs, extending coverall life.
• Strong cotton back for ventilation and comfort in hot climates.
• Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
• Optional leather gauntlet gloves for added protection of hands and wrists.
• Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
• Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
• Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
• Designed to meet the most stringent government guidelines.
• Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
• Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
• Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
• Comfortable ‘breathable’ cotton back.
• Adjustable wrist and ankle straps.
• Front press stud and Velcro strip fastening.
• Most commonly used when blasting with steel grit media.
• Sold individually.

Recommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate.

This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive.  One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.

• Suits the RPB Nova 3 and Nova 2000 Airfed Blast Helmet
• Inner Bib zips inside the helmet cape to prevent inward leakage of any dust or particles
• Provides a non-scratching seal around the blasters neck
• Can be easily removed and washed
• Sold individually
• Genuine Parts – Manufactured by RPB Safety

Helmet Hygiene Kit to suit Nova 2000 & Nova 3 Blast Helmet
Nova 3 Kit includes – Head Liner Padding, Side Padding Foam, Side Padding Covers and Neck Pad
Nova 2000 Kit includes – Helmet liner, Sidewings and inner bib/collar
Select size

• Perfect Blend of Garnet Abrasive blasting media for coating removal projects
• Will acheive a 60-100 micron profile
• Typical consumption rate 320 kg/hr
• Typical blasting rate for coating removal 15-20 m²/hr
• Inert, natural mineral
• Pinkish to reddish-brown, sub-rounded grains
• High performance, low dust abrasive media
• Economical, single use abrasive which may also be recycled

Maintaining the precision of the PosiTest PT Pencil Sharpener is crucial for accurate hardness testing of coatings. The DeFelsko® Replacement Blades pack ensures that professionals can continue to prepare their pencils with the exactness required for the Wolff-Wilborn test. These blades are easy to replace and restore the sharpener’s efficiency, helping to maintain the integrity […]

• Replacement fitting for connecting new style breathing tube to Nova 2000 respirator helmet
• New style fitting ensures that the breathing tube can not be installed incorrectly.
• Makes the helmet fitting a unique fitting
• Genuine Parts – Manufactured by RBP Safety

• 2223-000-15
• Lower Rod Guide for Combo Valve

Designed with precision in mind, the DeFelsko® PosiPen® addresses the need for accurate thickness measurements of non-magnetic coatings like paint or galvanizing on steel substrates. It’s particularly useful for quality control processes, where accurate measurements are critical. The PosiPen® can be applied to various substrates, including metal, plastic, wood, and glass, making it a versatile […]

• Sold as a pair
• Optimal Noise Reduction
• Enhanced Efficiency: Minimize distractions and increase productivity
• Durable Construction: Built to last with high-quality materials

• ConeSpray with Carriage – for 5″-10″ (125mm – 250mm) ID pipe
• “Hollow cone’ spray pattern
• Includes spray tip, shut-off valve, centering carriage
• 3,600psi pressure rating
• Connects to high-pressure airless sprayer pump – not included
• Not suited to spray UHS (Ultra High Solids) paints

Replacement side wings for the RPB® Nova 2000 AirFed Blast Helmet

BlastOne stocks all accessories and supplies for DeFelsko testing instruments. This PosiTest LPD verifier is designed to check the accuracy of the low-voltage pinhole detector. In addition to checking accuracy, the Verifier can be used to calibrate the LPD if used in conjunction with a digital multimeter (not included). Each PosiTest LPD Verifier comes complete with a Decade Box, connection cable, and instructions. MPN:  LPDVERIFY

• Suits the RPB® C40™ Climate Control Device (HLCCD3501)
• Manufacturer part number 03-521

• Through-Put upto 7 ton per hour of garnet
• Designed specifically to effectively recycle garnet
• Requires totally dry abrasive to operate
• Three phase Electrical Requirements 480v, 60 amp
• Compressed Air Requirement of 40 cfm @ 100psi

Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type. Boron Carbide is the longest life version, but not available in all configurations.  Polyurethane, steel, aluminum, etc. are also available and are lower in cost.

• Available configurations:
  • Contractor 50mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 32mm Fine Thread nozzles
    • Flange nozzles
  • Fine 32mm Thread Nozzle Holders to:
    • 20mm Medium Thread nozzles
    • 50mm Contractor thread nozzles.  This is a BlastOne Exclusive!

The DeFelsko® PosiTest® HHD Rolling Spring Connector is specifically engineered to provide a reliable connection between DeFelsko or SPY rolling spring electrodes and the PosiTest HHD High Voltage Holiday Detector. This connector is crucial for professionals conducting high voltage inspections to identify discontinuities or “holidays” in coatings on steel surfaces. The connector’s design ensures a […]

• Compatible with a wide range of blast pots
• Digital display of actual blasting time for individual blast outlets
• Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
• System available to run off pneumatic and electric deadman controls
• Triggered instantly by the deadman signal, so you get actual blasting hours
• Options available for single and multiple outlets.

• Genuine RPB replacement lens for L4 Blast Light
• Ensure you can work with optimal illumination as paint mist eventually coats lens
• Comes in Pack of 10

Designed for both field and laboratory use, the DeFelsko® PosiTest® DT Dust Tape Test kit is a critical asset for ensuring surface cleanliness prior to coating application. The kit’s contents, including an illuminated 10x magnifier with a stand-off for accurate distance measurement, a dust test comparator with ISO 8502-3 pictorial references, and a reusable transparent […]

We have the accessories you need for your RPB respirators.  This unit mounts inside the helmet, helps protects your operators hearing, and mitigates the concern that they may not use ear plugs.

• Excellent noise reduction
• Designed for Z-Link/T-Link systems
• Easy adjustments
• Convenient foldable design
• Sleek and stylish appearance
• Includes HAZ18535 mounting bracket

This 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.

• 10 pack of replacement filters designed for the PosiTector® DPM L

• Safety Lens (16-810)
• Suits RPB Z-Link Respirator
• Anti-fog /anti-scratch to give the wearer long time clear vision
• Suitable for welding / grinding / painting / inspection
• Sold Individually

Genuine Parts – Manufactured by RPB Safety

• Suit Graco Endurance, Extreme and Maxlife Lower “Legs”
• Repair Kits include all seals and upper rod and lower balls needed to completely repair
• Extreme Seal has 3x UHMWPE and 2x Leather Seals – Ideal for abrasive applications
• TuffStack PTFE Seals are Carbon filled Teflon – Ideal for chemical resistance and higher temperatures
• Sold Individually
• Geniune Parts – Manufactured by Graco

BlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc. This 6″ stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit.  It is available as a replacement part here. MPN:  HHDFANBRSH

• Retractable Paint Booths are designed and manufactured to meet the current Spray Booth Standards- AS4114
• Most booths are customised to individual needs
• Can be either dry filter or water wash systems
• Retracts to 16% of its original size, so you can use the space for other work types
• Retractable booths are available in open or closed front configurations
• 12 month warranty
• When using a Retractable Spray Booth – it is possible to extend the approved designated painting area
• Workshop flexibility is greatly enhanced with spray booth and paint booths that are retractable – when they are not in use a retractable paint booth can be rolled out the way so the work area can be effectively used for other trades
• The time required to retract a spray booth is normally less than 5 to 10 minutes

• Suits RPB Safety PX5 standard Air-Purifying Respirator (PAPR)
• Used between the PX5 PAPR and Helmet
• Ultra Flexible so the user isn’t restricted in movement
• Sold individually
• Genuine Product – Manufactured by RPB Safety

• Color coded for easy identification:
  • Grey filter frame #30 mesh
  • Black filter frame #60 mesh
  • Blue filter frame #100 mesh
  • Red filter frame #200 mesh
• Open both ends – can be installed either way
• Suits large EasyOut filters, UltraMax, GMax sprayers
• Sold individually

The DeFelsko® Conductive Rubber Paddle, specifically designed to work alongside rolling spring electrodes for the accurate identification of holidays in coated surfaces. Manufactured in the USA and noted for its conductive properties, this rubber paddle aids in the precise location of faults by facilitating a visible spark when a discontinuity is encountered. It’s an essential […]

• Replacement Pre Filter for the PX4 Powered-Air Purifying Respirator
• Genuine RPB product
• Comes in pack of 10

• Pack of 5 test kits
• Surface salt extraction efficiency up to 98%
• Measurement range 5 ppm to 200 ppm
• Used in accordance with ISO 8502-5, ISO 8502-6, ISO 8502-15 and AS 1627-4 Standards

General purpose air connection fittings

• This is the Reducing Bushing group
• Many sizes available
• Many materials available, including Stainless Steel, Brass, Galvanized Malleable Iron, and Iron
• 150 psi rated

Contact us for info on sizes and materials not listed.

• Replacement battery for the PX4 Powered-Air Purifying Respirator
• Genuine RPB product
• Long life, lightweight Lithium battery
• Rechargeable
• Delivers up to 13 hours on single charge

The Nut and Tail Connector (MPN: P-FMTN) is a durable, two-piece fitting designed specifically for AHR general-purpose air hoses used in blast equipment. Constructed with a swivel nut and female NPS long shank coupling, this connector offers versatile clamping options for secure, leak-free performance in pusher line assemblies and blast pots.

• MPN: P-FMTN
• Two-piece design: Hose tail to swivel nut with female NPS thread
• Material: Made from plated steel, not plated iron, for corrosion resistance
• Clamping options: Compatible with double bolt clamp or bandit clamp
• Gasket: Extra-thick gasket minimizes dislodgment risk
• Applications: Ideal for blast pot pusher lines and general-purpose air hoses

The PosiTector® 6000 probe family – DeFelsko’s solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies.  In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows probes only.  Compare package options including DeFelsko 6000 Standard Gages and DeFelsko 6000 Advanced Bodies.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

• Replacement outer lenses for the RPB Z-Link Respirator helmet (16-811)
• Tear-off are easily removable
• Keep vision field clean and clear without removing helmet
• Pack of 50

Genuine Product – Manufactured by RPB

• Operating pressure rating 40,000 psi
• Cleaning Rate of up to 80m2/hr
• 400mm Cleaning Width
• Requires 50 CFM Air Supply for Nozzle Rotation
• Includes vacuum port for connection to vacuum source

• Multi-purpose inline ball valve
• Plated brass corrosion-resistant body
• Full bore design for maximum airflow
• Rated for use up to 600 psi
• Female NPT threaded ports
• Sold individually

The DeFelsko® Silicone Holster serves as an essential accessory for professionals looking to extend the lifespan of their coating thickness gauges. Crafted from durable silicone rubber, this holster provides a snug fit for various PosiTector® gauge models, offering protection from drops, scratches, and the elements. Whether you’re working in harsh industrial environments or conducting delicate […]

• Welding ADF Rear Lens (16-873)
• Pack of 10

Genuine Product – Manufactured by RPB

• Repair Kit for Ultra Max II

BlastOne offers a full selection of industrial fittings.  This group is the Hose Barb x Female Pipe Swivel (Ball Seat), or aka “Nut & Tail”.

Other information is as follows:

• Hose Barb (aka Hose tail) x NPSM FPX Female Swivel
• aka “Nut and Tail”
• The first dimension is the hose ID for the hose barb
• Use with crimp ferrules or worm gear clamps
• Applications: Low-Pressure SAE general service air, water, and hydraulic hose
• Operating Pressure Range:  250 PSI maximum at 72F
• Operating Temperature Range:  -40 to 160F at 150 PSI max

• Manufactured glass abrasive
• Miniature, translucent glass spheres
• Spherical beads impart a satin or matte ‘shot peened’ finish to the work surface
• Widely used in hand cabinets for surface cleaning rather than surface etching
• Can be recycled

Thickness standards are used to verify the accuracy and operation of coating thickness gauges.  As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.

DeFelsko offers various solutions for this process and this group of products is their group of metal zero plates, as follows:

• Aluminum.  Available in small and medium sizes.
• Steel.  Available in small, medium and large sizes.

• Suits RPB Z-Link ADF Shield (Auto-Darkening Filter) for welding (16-872)
• Used to protect the filter from damage and wear
• Pack of 10

Genuine Parts – Manufactured by RPB Safety

BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V700 and includes the following:

• ESCON 70/10 Motor Controller CB4.0
• Actuator 90mm with Connector
• V700 WCS with Connector
• Limit Switch with Connector
• Harting Han-Eco Locking Lever
• Swingarm Clamp with Shaft, includes key
• Gearbox 050 with Flange
• V700 Motor Assembly
• Relay Module
• Castor Wheel

BlastOne BlasterAll Blasting Gloves feature:

• Leather exterior for good abrasion resistance
• ANSI Cut Level 4 Kevlar lining and 18 centimeter gauntlet provides extra protection for hand and forearm
• Stylish & Comfortable design
• Touch-screen finger tips allows answering mobile devices without removing the gloves
• Extended size selection from X-Small to 2X-Large
• Coordinates with BlastOne BlasterAll Coveralls available here

• Replacement FLO Ring Gasket for Tri-Clover
• Included in the main Tri-Clover Assembly (GV2410320)
• Recommended spare part

• Suit Blast and Vac Workhead VCBV200
• Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
• Suitable for blasting an inside corner
• Sold Individually

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Covers up to 45 m² / 485 ft²  per hour
• Accommodates up to 16 nozzles
• Compatible for use on upside down, vertical, or horizontal surfaces
• Enclosed UHP water blasting and washing
• Up to 5X faster than manual work
• Blasts an incredible 15.5″ (400 mm) cleading width
• Wirelessly controlled – keeps workers out of harm’s way
• Reconditioned older VertiDrive models may be available for sale

Different packages available

• Spring-Loaded Collar for Tri-Clover
• Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
• This is the version that is used on our GV2410320SPBV

• Suit Blast and Vac Workhead VCBV200
• Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
• Suitable for blasting an outside corner
• Sold Individually

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Blasting Robot
• Compatible for use on horizontal, overhead, and vertical surfaces
• Can operate upside down on steel surfaces via magnets
• Interchangeable applications (washing / hydroblasting / abrasive blasting)
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for compact working radius
• Reconditioned older VertiDrive models may be available for sale

Different packages available

Introducing the DeFelsko All-In-One Inspection Toolkit, exclusively at BlastOne, featuring the brand-new Testex Digital Micrometer Kit.

This comprehensive bundle includes everything you need for precise and efficient inspection tasks: PosiTector Advanced Body, PosiTector 6000 FS Probe, PosiTector DPM Probe, and more.

Ensure accuracy and convenience with durable, high-quality tools designed to meet your inspection needs.

Limited availability – order today and experience the new standard in inspection!

Each kit includes:

• DeFelsko Digital Micrometer with Testex Profile Tape (3 rolls)
• DeFelsko 6000 Advanced Memory Gage
• DeFelsko PosiTector Dew Point Meter (DPM) Probe
• DeFelsko Dew Point Meter Logger (DPML)
• DeFelsko Dry Film Thickness (DFT) Ferrous Probe (Cabled)
• Dust Tape Kit
• Inspection Carry Case
• Certified DFT Thickness Shim Set (8 shims)
• DeFelsko PosiTector Lens Shield (5 pack)
• DeFelsko DPML Replacement Filters (3 pack)
• DeFelsko Wet Film Thickness Gage (10 Pack)
• DeFelsko Tape Measure Keychain

• Suits Warrior 4000 Air Motor
• Repair Kit for rebuilding Air Valve
• Kit Includes:
  • Carriage – O-Ring
  • Air Valve – Cup, Plate, Gasket and 2x O-Rings
  • Nylon Ball Check – O-Ring
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

BlastOne offers a full selection of industrial fittings.  This group is the Brass Reducer Bushings.  Other information is as follows:  

• 1st dimension is the NPTF Male Pipe size 
• 2nd dimension is the NPTF Female Pipe size
• Operating Pressure Range:  1000 PSI
• Operating Temperature Range:  -54 to 121C

• Measures dry bulb and wet bulb air temperatures
• Folding handle for compact storage
• Replaceable thermometers
• Measurement range 0°C to +43°C
• Calculated relative humidity accuracy ± 5% RH
• Calculated dewpoint accuracy ± 3°C

• Suits RAC 5 or RAC V Spray Tip
• Used to Seal between the Spray Gun and the Tip Orifice
• 4050psi Rated
• Sold as a pack of 5
• Genuine Parts – Manufactured by Graco

BlastOne carries all the parts and accessories for the GVS / RPB respirators. This group includes all breathing tubes (aka breathing hoses) as well as the covers for both the supplied air and the PAPR versions, as follows:

• Nova 2000 SAR Breathing Air tube, legacy version with adapter, MPN: NV2021A
• Nova 3 & updated Nova 2000 SAR Breathing Tube, MPN: NV32021B (does not include adapter)
• T-Link, T200, Z4, & Z-Link SAR Breathing Air Hose, MPN: 04-833A (includes adapter for Z-Link & T-Link)

In addition to the above Supplied Air Respirator tubes, we have PAPR breathing tubes for all RPB products as well as breathing air tube covers.

• Replacement ball and chain for Western Tech remote control handle
• Operator must use as per instruction manual and conduct Risk Assessment based on end user and site conditions to determine if this product can be upgraded to a safer option.
• BlastOne Consider that it is not safe to use a ball to ‘trigger’ the deadman
• Use this ball and chain as a door knocker instead
• Sold Individually

• Pneumatic Complete Retrofit kit includes:
• Triple-line coupled remote control hose
• Control hose connections for air supply
• Auto air valve and Thompson Valve II metering valve
• Pneumatic push-pull abrasive on-off switch
• Response deadman handle

• Xtreme Lower Long Filter Screen
• Long Filter Screen #60 mesh (pkt 25)
• Mesh: #60 (6″)

• Fits RPB Nylon Blast suits as well as BlasterAlls suits
• Genuine RPB Safety Part
• Price shown is per pair.

RENT OR PURCHASE THIS VERSATILE, MULTI-PURPOSE SOLUTION!

• Increases productivity up to 300%
• Covers up to 20 m² / 215 ft² per hour
• Compatible for use on horizontal, overhead and vertical surfaces
• Closed hydroblasting with vacuum system
• 3X faster than manual blasting
• Blasts an incredible 190 mm (7.5″) cleaning width
• Wirelessly controlled – keeps workers out of harm’s way
• Strategically designed for quick (dis)assembly
• Pneumatic version available
• No recoil to operator

• Suits GVS Integra half-mask w/goggles
• Protects goggles while spraying.  Remove and replace when needed to keep the goggle lens clear.  Save time over cleaning the goggles by hand!
• 10 peel-off visor lenses per pack
• Priced per pack.  5 packs per case.
• Genuine Parts – Manufactured by GVS

• Uncorded, Tapered Style
• Packed in individual pairs
• Box of 200 pairs

Specifically designed for 32mm to 38mm valves, part number 2123-007-21 guarantees a perfect fit and reliable operation.

• Perfect Fit for 32mm to 38mm Auto Air Valves
• Genuine Axxiom Part: 2123-007-21

• Non-genuine tear-off lenses to suit 3M 6000 full face respirator
• Protects the operators from paint overspray
• Sold as a pack of 25 lenses

• Replacement part for the Control Line Pilot Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
• Provides sharp, clean and rapid deadman response.

• Ideal for sandblasting new steel garnet blasting sand to remove milscale
• #80 grain size
• Will achieve a 40-60 micron profile
• Typical consumption rate 250 kg/hr
• Typical blasting rate for Milscale removal 20 m²/hr
• Inert, natural mineral
• Pinkish to reddish-brown, sub-rounded grains
• High performance, low dust garnet abrasive
• Economical, single use abrasive which may also be recycled

• Suits BABL3475 LED Blast Light
• Replacement Sacrificial Pyrex Blast Lens to protect the Light from the blasting ricochet
• Simple to replace – Unscrew the front black cover slip in the lens
• Sold as a box of 12
• Genuine Part – Manufactured by Western Technology

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water must be injected under the patch.  These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units.

MPN:  SSTDISPTIP

The leading GVS Elipse dust masks are now available for working with paint!

• Certified to AS/NZS 1716:2012
• A1-P2 filters
• GVS Half Mask are some of the worlds most comfortable masks
• Extremely lightweight
• Hypoallergenic
• Snug-Fit design provides an enhanced comfort to the breather
• P2 filters will remove up to 99.97% of particulates and contaminants down to 0.3 microns
• The high breathing flowrate design reduces risk of fatigue
• Filters are installed and mask comes ready to use
• Medium/Large size suits 80% of workers

• Replacement filter drain valve for the RPB Radex Breathing Airline Filter (P-APF3)
• Made of brass
• Sold individually

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water is measured before injecting under the patch.  These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10.

MPN:  SSTCUP

• Filters breathing air to remove oils, odors, moisture, dust
• Does not remove CO, you need an additional monitor for that.
• Can be either floor or wall mounted, uses the same bracket
• Lightweight, site rugged, cast aluminum construction
• Filter only has 4 bolts to remove to change the filter every 3 months which saves you time
• Filter Sold with
  • RPB Radex Filter 04-900
  • Quick connect outlet fitting
  • Inlet air hose connector

The PosiTector SST – DeFelsko’s innovative solution for accurate measurement of surface salts.  This soluble salt tester is fully interchangeable with the PosiTector platform and offers the following:

• Familiar.  The DeFelsko SST is one of the expansive list of probes interchangeable with the tried-and-true PosiTector gage/body.
• Capable.  In addition to soluble salt measurement, it displays the test duration, sample temperature, and more.
• Configurable.  Available in the following:
  • Probe only.  Use with existing PosiTector gauge.
  • Probe / Gauge.  This basic kit includes carrying case.
  • PosiPatch kit.  Available with choice of gages, this Kit P includes choice of standard or flexible magnetic rings as well as starter supplies.
  • Disposable latex-free kit.  Choice of gages as well as a supply of DeFelsko Adhesive patches, this Kit D also includes starter supplies.
  • Disposable Latex Adhesive kit.  Choice of gages as well as a supply of Latex Adhesive patches, this Kit L also has the other starter supplies needed to get started.
• Note:  Both disposable patch options feature easy-to-remove adhesive that don’t leave residue on the surface.

• Suits Brite-Blast Light BABL3070L
• Used to hold the blast lens inside the blast light body
• Sold Individually

• Suits RPB Nova3 Blast Helmet
• Cape Cover Band is installed over the top of the blast cape
• Used to keep dust and abrasive out of the inside of the blast hood and cape
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

• Suits Nova 3 Blast Helmet
• Used to protect the operator from any inward leakage of dust or abrasive
• Each cape comes with an inner bib for added protection and comfort
• Available Configurations:
  • 28″ or 38″ Leather Cape
  • 28″ or 38″ Nylon Cape
  • Blast Jacket (XL or XXL)
  • Hibernia / Long Sleeve
• Sold Individually
• Genuine Parts – Manufactured by RPB Safety

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water must be injected under the patch.  These replacment syringes are available as replacements in this convenient package of 10 units.  The plastic or metal needles are available separately depending on which test patch system is used.

MPN:  SSTSYRINGE3

• Modified High-cube-style shipping container construction (6m, 12m)
• Watertight, Weatherproof design
• Completely self-contained for maximum portability
• Simple setup/installation
• Partial abrasive recovery system, with shovel-in hopper
• Available as fully assembled unit or retrofit kit
• Instant Preliminary Quotes Available on Request!

• Flame Retardant
• 3m wide and 50 metres long
• Twice as strong as the strongest conventional sheeting
• When blasting will contain dust, but will lightly breath
• When painting will disperse fumes from volatile solvents
• Keeps rain out of contained area, only a fine mist will penetrate

Optimize your spray gun’s performance with the “Spray Gun Filter #100” (SKU: GR218133). Designed for older Graco airless spray guns, it filters large particles, ensuring a flawless finish, especially with low-quality paints.

Heavy Duty Blast Room can be designed for use with any steel or heavy machinery manufacturers, refinishing facilities, for oil and gas components, or in job shops. 

The “General Purpose Custom Engineered Blast Rooms and Facilities” (SKU: SBMGS) are heavy-duty, long-term sandblasting solutions. Designed for diverse industrial needs, these rooms feature robust steel panels, advanced abrasive recovery systems, and extensive customizability. Ideal for consistent operations seeking a controlled blasting environment.

• Head Liner Kit (NV3-734) includes
  • Tough polystyrene foam shell
  • Soft top of head padding
  • 4x HLNV37341 Clips
• Sold as a complete kit
• Suits RPB Nova3 Blast Helmet

Genuine Parts – Manufactured by RPB Safety

Achieve seamless sanding with the Heavy Duty Sanding Disc with Velcro (SKU: P-HTSPVSD), specifically designed for 6″ Orbital Palm Sanders. Available in multiple grits and guarantees robust performance.

• Suits 6″ Orbital Hand Held Palm Sander
• Has no holes in sandpaper
• Heavy Duty with Velcro
• Comes in 40#, 80#, 180#

Easily measure wet film thickness between 25 to 2032 microns with the durable and reusable “Wet Film Thickness Gauge Aluminum Pack of 10” (SKU: INB115AL). Perfect for consistent and precise readings in protective coating applications.

• Re-usable aluminum gauge
• Measure wet film 25 to 2032 micron
• Come in pack 10

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 6 to 8 inch fan width (XHD3 series).
• In this group, the orifice sizes range from .007 to .055 inches (sizes 307 to 355).
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

• Kit includes L & R Side Padding Frames (NV3-731)
• Suits RPB Nova3 Blast Helmet
• Used to hold the side pads which encase the blasters ears
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

• Comes in pack of 10 hoods
• Comfortable elastic stretch fabric
• Conforms to head contours
• Can be worn three ways (over nose, under nose, under chin)
• Close fitting design, ideal for wearing underneath a blast helmet or spray hood

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This7250 PSI Airless Spray Tip group has 8 to 10 inch fan width (XHD4 series).
• In this group, the orifice sizes range from .009 to .081 inches (sizes 409 to 481)
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

• Visor Kit includes hinge and latch (NV3-726)
• Suits RPB Nova3 Blast Helmet
• Used to repair the helmet, the visor most often breaks when blasters
  • Try to install too many lenses
  • Uses the visor as carrying device
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

• RAC 5 Hand Tite Tip Guard
• Size: 7/8″
• Use with all RAC-4 and RAC-5 series tips
• 243161 or 243-161

BlastOne offers all accessories and replacement parts for DeFelsko testing equipment.

The innovative PosiTector Dew Point Meter Logger autonomously records climatic conditions and can remain magnetically attached to the substrate 24/7.  This Kensington lock provides security, helping to ensure that the valuable instrument remains secure.

MPN:  DPMLLOCK

• For fixing BlastClad Sheeting together to create an enclosure
• Pack: 100

DeFelsko® enhances the PosiTest® HHD series’ flexibility and efficiency with its selection of electrode rods, catering to varied inspection needs and surfaces. The rods are offered in two convenient sizes, 13cm for close-range work and 50cm for extended reach, allowing for adaptability across different project requirements. For maintaining optimal performance and securing the electrode rods […]

• Replacement frame for holding the inner safety lens securely
• Suits the RPB Nova 3 Respirator helmet

Genuine Product – Manufactured by RPB

• Support for Long Filter
• Suits 6″ Filter

DeFelsko®’s PosiTest HHD Ground Cables are essential accessories for conducting accurate high voltage holiday tests. Available in 25-foot (HHDGND25) and 50-foot (HHDGND50) options, these ground cables offer flexibility and extended reach, catering to diverse operational requirements. Engineered for durability and performance, they ensure a stable and reliable ground connection, crucial for the detection of pinholes, […]

• Replacement belt which holds control valve for the Nova 2000 Respirator helmet
• Genuine RPB part

The “Testex Surface Profile Dial Thickness Gauge Microns” (SKU: INE1124M) offers accurate measurement of surface profiles on Testex replica tape. Compliant with ISO8503-5, AS3894-5, and AS1627-4 standards, this gauge kit ensures precision in every paint inspection.

• Used to measure the maximum surface profile produces on the Testex replica tape
• Kit includes
  • Dial thickness gage for microns
  • Burnishing tool
• Used in accordance with ISO8503-5, AS3894-5 and AS1627-4 Standards

• Suits RPB Nova 3 Blast Helmet
• Replacement Side Wings, which encase the blasters head and ears
• Replace often for hygienic reasons
• Smaller heads = thicker paddings
• Larger heads = thinner paddings
• Sold as a pair of Padding Covers – Left & Right
• Genuine Parts – Manufactured by RPB Safety

Surface Profile Standards and Shim Sets are used for checking and adjusting calibration on PosiTector SPG, PosiTector RTR (and other depth micrometer probe) instruments.  Product details as follows:

• For the PosiTector SPG:
  • Certified Standards.  Typically used in calibration labs, these are available for any user who desires this level of verification.  Includes serialized and traceable height standards mounted to a metal plate.  Labeled in both metric and imperial units.
  • Certified Shim Set.  Premium option for everyday use with any depth micrometer using a fine-pointed probe (as well as the PosiTector SPG).  Includes 3 shims at 50/125/500 microns (2, 5, 20 mils).
  • Zero Glass Plate / Metal Shim (Non-Certified).  For training and quick checks for accuracy, each new SPG unit comes with this verification set, with replacement / additional units also available for purchase here.
• For the PosiTector RTR: (both models unless otherwise noted)
  • Certified Shim Set.  Premium option to check Peak Height measurements for accuracy verification on the RTR series (as well as other spring micrometer replica tape readers).
  • Non-Certified Shim Set (aka Precision Plastic Shim Set). Lower cost version of the above, ideal for everyday accuracy verification.
  • Single Check Shim.  This non-certified shim comes standard with each new RTR and is available as a replacement if desired, although it is more economical to purchase the above full set.
  • Check Tape.  This reusable tape is used to verify Peak Density, and is used on the RTR 3D model only.

Abrasive Blast Lights  – available with Halogen or LED globes

• Comes with 10ft bare cable
• Aluminum blast light straps to the blast hose
• Low voltage 12 volt operation for operator safety
• Ideal for blasting in tanks, ship hulls, and other non-flammable locations
• Recommended accessory for all sandblasting pots and operators conducting abrasive blasting services
• Enhances the productivity of the abrasive blasting operation whether you are dry blasting or vapour blasting

• 2229-100-99
• Service Kit for Electric Control Valve
• Reduces wear on both the remote control exhaust valve and the abrasive metering valve.

RPB Radex Breathing Air Filter Cartridge

• Replacement Filter for RPB series and Bullard series of breathing air filters
• For maximum efficiency air filter cartridges must be changed every 3 months or 400 hours usage – whichever occurs first
• RPB Part #: APF3100
• Integral part of sandblast helmet respirator package

• For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
• Material: Double-lipped rubber
• Compatibility:
  • PCG-1: 3/4″ ID and Smaller Blast Hose
  • PCG-2: 1″ ID Blast Hose
  • PCG-3: 1-1/4″ ID and Larger Blast Hose
• Sold as a pack of 10

• Made by Devilbiss
• Conventional spray gun
• Available as suction or pressure feed designs
• Industry Standard set up is 2.2mm size
• Available in fluid setup sizes 0.055″ (1.4 mm), 0.070″ (1.8 mm), 0.086″ (2.2 mm), 0.110″ (2.8 mm)
• Optional high wear and carbide setups available for advance gun

• To replace the valves on your pressure release blast pot
• Retrofit Kit includes:
  • 1 1/4″ Combo Valve
  • 1 1/4″ MicroValve 3
  • Full pusherline kit
  • All interconnecting hoses
  • Control line strainer and control valve
  • Response deadman handle and Deadman line

• European-style remote controls
• 1-1/4″ (32mm) thread inlet valve
• 3/4″ (19mm) thread ported exhaust valve
• Available as an integrated inlet/exhaust assembly
• Supplied standard as separate valves for simplified installation and ease of maintenance
• Service repair kit includes seals, gaskets, etc. to service both the inlet and exhaust valve
• Optional service kit #2 also includes exhaust deflector plate and gasket
• Recommended replacement is the Combo Valve System- DM2223RK00

AVAILABLE FOR RENTAL OR PURCHASE

• Wet sponge spark tester for metal and concrete substrates
• Test coatings up to 20 mil
• Has visual reassurance that the instrument is properly grounded
• Calibration Certificate shows traceability to NIST (Long Form) Included
• Two Year Warranty
• Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
• Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8″ x 8″ Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2′ of reach, universal adapters to extend existing paint rollers and poles, 40′ of ground wire, 15′ of hot wire, and magnetic grounding post

Tite-Space nozzles are angle nozzles, designed for use in areas that are especially difficult to access, and feature:

• 3/8″ NPT Thread in either Male or Female configuration
• Male version has brass threads and requires a minimum opening clearance of 1″.  This version is 1-7/8″ long.
• Female version has steel threads and requires a minimum opening clearance of only ¾”.  This version is 3-1/8″ long.
• These nozzles are often used in conjunction with our Tite Space Invader Blasting Kit, available here
• Angle options include:
  • 45° & 60° forward blast
  • 90° right angle blast
  • 135° reverse blast
• Some options available in double, triple or quad orifices in addition to single.
  • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly.
• Stock version uses tungsten carbide lining.

Note:  Due to the angled blast stream, these nozzles will wear more quickly than traditional versions.  For larger projects, we offer long-life Roctec nozzle linings by special order, with a minimum order quantity of 5.  Contact us for further details.

• Fully compliant with all Australian regulations
• Exhausts at a rate of 0.5M/second
• 2 Standard widths – 1 metre and 2 metre
• Uses Andreae filters to capture overspray

• 3/4″ NPSM (20mm) ‘M’ thread
• 1/2″ (13mm) throat entry
• Straight bore
• Tungsten carbide liner
• Aluminum jacket and thread
• Use HF GFBS-P nozzle washers (1 included)

• Hi-flow 1-¼”  Pusherline Kit includes
• 1-¼” ball valve
• 1-¼” Nut and tails with bolt style clamps for in-field installation

• Ideal for blasting recesses, pipe internals, behind angles, etc.
• 2″ UNC (50mm) coarse Contractor thread ‘C’ or 1 1/4″ NPSM (32mm) Fine Industrial thread ‘F’
• 3/4″ (20mm) throat entry
• 45° single or triple (equi-spaced) side outlets
• Tungsten carbide liner
• **Triple orifice nozzles have triple air & abrasive consumption!

Industry Leading Blast Nozzle

Click for Buying Guide

• SiNi II grade silicon nitride liner
• Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
• Vacuum molded urethane thread will not ‘jam’ in blasting nozzle holder
• Half the weight of conventional tungsten carbide abrasive blast nozzles
• 2″ UNC (50mm) coarse Contractor thread
• 1¼” (32 mm) wide throat entry, long venturi except Ultra-3 & Ultra-4 have 1″ (25 mm) throat entry

• Suits 1 1/4″ (32 mm) threaded valves and pots
• Assembly includes
  • 2x half nipples
  • FLO-ring gasket
  • Hinged stainless steel collar with toggle bolt
• Use thread sealant tape or compound to ensure an airtight connection

• Conventional bleeder-type deadman control handle
• 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
• Large lever design
• Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

• Xtreme Pump Suction hose for Xtreme, King, XL, NXT Pumps
• 1″ (25 mm) internal diameter
• 6′ (1.8 m) suction hose with male pipe thread on one end for the suction tube (use GR 197682 – not included)
• Quick Knockoff coupling for connection to the pump lower

Every BlastOne dehumidifier has the following features:

• Unit-mounted filters, options include:
  • 10% permanent washable 2″ thick industrial
  • 30% 2″ (standard) pleated throw away
  • 55% to 65% 4″ cartridge throw away
  • 99.97% HEPA 12″ cartridge
• G-90 16-gage galvanized double-wall construction with insulation
• Direct-fired natural-gas, electric or propane reactivation systems
• Cooling coil and heating coil options
• Skid or trailer mounted
• Full protective enclosure
• Integrated control system with 10-point operational function display
• Shipping covers for all inlets and outlets
• Packaged refrigeration system options
• Packaged generator system options

• Suits Nova 3 Blast Helmet
• Genuine lenses are your only guarantee of safety – insist on them in your business
• Three-part lens system consists of:
  • Inner lens thick eye protection layer – meets ANSI Z87.1 standard
  • Tinted inner lens – best for use when interfacing with high-intensity light sources
  • Outer lens protects the more costly inner lens
  • Tear-off lens allows you to tear it off and keep blasting. Contains a unique pre-folded tab to ensure that the blaster can only use one at a time
  • Nova 3 Cassette Lens (Box of 20) – 5 Tear-offs and 1 Outer in a combined kit – (20 sets of 6 lenses/box)
• Sold by the pack (Cassette’s by the box)

• 3/4″ NPSM (20mm) ‘M’ thread
• 1/2″ (13mm) throat entry
• 45° single or triple (equi-spaced) side outlets
• Tungsten carbide liner
• **Triple orifice nozzles have triple air and abrasive consumption!

• Pneumatically operated via twinline hoses.
• Works with all twinline pneumatic remote control systems
• 1/4″(6 mm) air supply threaded connector
• 1/8″ (3 mm) air return threaded connector
• Operate by pulling down the safety flap and holding the large handle down

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

Inspection instruments are an investment worth protecting and DeFelsko has a range of protective cases available, as follows:

• The PosiTector Case.  Sturdy hardshell design designed to carry a PosiTector gage / body and multiple probes.  Space for manuals, calibration certificates, and more.  MPN: CASEINSP
• The Pelican Standard Inspection Kit Case.  Lightweight, watertight, and crushproof, this case securely stores a PosiTector Gage and 3+ PosiTector probes with customized foam inserts.  30 x 22.5 x 13.2cm.  The MPN is CASEINSP-P.
• The Pelican Large Inspection Kit Case.  Like the smaller Standard version above, this unit is lightweight, watertight, and crushproof but is larger to accommodate 5+ probes as well as SST Soluble Salt Tester accessories.  43.2 x 29.7 x 15.7cm.  The MPN is CASEINSPL-P.
• The Pelican Adhesion Tester Case.  Heavy duty, waterproof construction features customized foam inserts for the PosiTest AT-A automatic tester.  46.2 x 34 x 17cm.  The MPN is CASEATAB-P.

Measuring surface profile has been done successfully for over 50 years with the Testex replica tape and spring micrometers. DeFelsko acquired the Testex brand and has updated it, now offering Digital as well as Analog options for these micrometers (aka Snap Gages, or Dial Thickness Gages).  Various options available as follows:

• Certified.  Available in:
  • Imperial / Mils
  • Metric / Microns
  • Digital version is switchable between Mils and Microns
• Non-Certified.  Available in:
  • Imperial / Mils
  • Metric / Microns
  • Linearized in Mils
• Package Options.  Available as:
  • Basic Micrometer kits, including choice of gage, burnishing tool, carrying case, instructions & 1 year warranty.
  • Complete kits (aka Replica Tape Kits), including Basic kit above as well as Training Surface Tool, and 1 roll each of Testex Press-O-Film Coarse and X-Coarse tapes.

• Specified capacity 160 cu ft / 4500 liters
• Manufactured by Schmidt to BlastOne unique specifications
• Garnet abrasive capacity – 23800 lbs / 10.8 tonne
• 1600 cfm Airprep mounted directly on the front of the MegaBlaster Bulk Blaster
• Comes with 2 Thompson Valve metering valves, up to 4 outlets possible
• Skid Mounted Bulk Blast Pot

Click for Buying Guide

• 2″ UNC (50mm) Contractor thread
• 1¼” (32mm) wide throat entry, extra long venturi
• Extra long venturi increases performance by up to 30%
• SiALON II grade silicon nitride liner
• Aluminum jacket and thread with urethane cushioning
• New feature: Non-slip knurl

Abrasive blasting hopper lid and mesh screen

• Lid and Screen Set designed to suit blast pots
• Hole size 1/8 (3 mm)
• Screen sieves foreign matter out of the abrasive
• Lid keeps moisture, rain, dew, etc out of the blast machine
• Select the size to suit diameter of your blast pot 12″ 18″ 24″
• Fit most portable blast machines, made by Schmidt abrasive blasting, Axxiom Manufacturing, clemco

• Kit is designed to replace the Dual inlet/outlet valve systems
• Retrofit Kit includes:
  • 1 -¼ (32 mm) Combo Valve with blowdown hose
  • Response deadman control handle and twinline hose
  • All fittings needed
• Note: Does not include the Pusher Line Kit or MicroValve – order separately

• Rated for 15,000 psi
• 13 GPM (49 LPM)
• Trailer-Mounted
• CAT Diesel Powered
• Supplied with 20M HP hose and gun
• Manufactured by NLB Corp

All the power. Half the size!

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• Designed to optimise the use of GMA garnet
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

Act quick! Limited supply.

• Suits Nova 2000 Blast Helmet
• Genuine lenses are your only guarantee of safety – insist on them in your business
• Three-part lens system consists of:
  • Inner lens thick eye protection layer which meets ANSI Z87.1 standard
  • Outer lens Protects the more costly inner lens
  • Tear-off lens Allows for easy tear off with no down time. Contains a unique pre-folded tab to ensure that the blaster can only use one at a time
• Sold by the pack

• Fits Nova 3 PAPR (powered air-purifying respirator) headgear
• Tinted inner lens suits the three-part lens system
• Ideal when interacting with high-intensity light sources
• Meets ANSI Z87.1 Standard
• Sold in packs of 10
• Genuine Parts – Manufactured by RPB® Safety

• 100 psi max fluid output pressure
• 8 gallon (30 liter) max free flow
• Aluminum pump with fluid re-circulation valve
• (10 mm) fluid outlet
• High flow air regulators
• Comes with 1.4 mm AirPro Spray Gun and 7.5 m of Twin Air/Paint Hose
• Available as Pail Mount, Stand Mount or Cart Mount

The Nova series of respirators offer the Nova Talk in-helmet communication system. This system requires a cable to connect your specific 2-way radio to the helmet.

If you’re unsure which cable you need to order, you can find our compatibility table under our Description tab. If any questions, chat or call us – we’re real people and happy to help!

• Xtreme Siphon Tube
• Diameter: 18″ x 1″
• Shape: Elbow

AVAILABLE FOR RENTAL OR PURCHASE

• MegaFlow heavy duty air supply bull hose
• Fitted with your choice of industrial fittings
• Fitted by Trained and Certified BlastOne Technicians
• Rated to 300psi with 3:1 safety factor
• Always use with safety whipchecks

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc.

These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces.  Additional information is as follows:

• Multiple sizes available between 2 – 48″ wide (51 to 1219 mm)
• Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do.  Each brush is supplied ready-to-use.
• Sold individually.

• Essential Safety Item for Megablaster Pot closures
• Designed and installed on all Schmidt Bulk Pots since release in 2010
• Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
• Ensures that correct operating procedures are followed when opening the fill port.
• Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open

• Unfitted Blast Hose
• High quality, long lasting sandblasting hose
• Blast Hoses have a thick, anti-static, natural rubber liner
• Made to BlastOne Blast Hose specification
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap™ outer blasting hose cover
• Heavy Wall Unfitted Blast Hose
• Recommended for use as an extension hose
• Fit with your choice of couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.

• Uses Graco XL air motor – the largest motor ever built by Graco
• 45:1 pump ratio
• Mounted on a heavy duty cart
• No paint feed hopper included – buy separately
• High flow rate will handle multiple spray guns

VLP-24 MagnaValve, 200-1000 Lbs flow rate, no sensor, 2.5″ high 24 Vdc

• Used for short-term dust collection
  • After 1 days use, they need to be washed and dried
    • Fabric usually clogs after 4-6 hours
• Fits many portable dust extraction fans
  • NOTE – Not recommended for Black Max electric fans larger than 16″
• Used for sandblasting dust control
  • Nuisance, non-toxic, non-hazardous dust
• Ideal for short-term abrasive blasting projects
• Made from 100% cotton
• Includes zipper access for cleaning out loose dust before washing (not applicable to DCBMX2100)
• Breathable for air filtration
• High volume air flow design
• Tapered necks for easy attachment to extraction fans
• Quick to set-up and pull-down
• Recommended purchasing in quantities of 10

NOTE – Dust socks will not capture dust under 10 microns. Hazardous dusts, such as lead, asbestos, beryllium, sillica, or PCBS, are usually under 5 microns. 

• Premium duty industrial air and water supply hose
• Temperature range of 0°F to +200°F (-20°C to +95°C)
• 250 psi rated (17.2 bar)
• Supplied as bare hose – specify required length
• Oil mist resistant tube and cover

• Use at entry-exit points and around the site perimeter
• Alert and warn personnel of danger
• Durable Colorbond metal
• Large 24″ x 18″ (600 mm x 450 mm) size
• Bold colors and clear message (printed 1 side only)
• Pre-punched fixing holes for wiring the sign onto a fence or mounting it onto a swing stand frame
• Signs have small rounded corners for safe handling
• Customized warning message texts available contact BlastOne

• 40,000 PSI pressure rated
• 38 litre/minute flow rate
• Diesel Powered, Skid-Mounted
• 300 litre fuel tank
• Supplied with UHP hoses and 2 x Rotating Lance
• Manufacturered by NLB Corp

• Complete System to spray Passive Fire Protection (PFP) coatings
• Uses a base Graco XM sprayer and includes
  • Two Check-Mate® 20-gal (76 l) heated hopper feed modules with agitators and level sensors
  • 50 ft (15 m) dual heated hose set
  • Remote mix manifold and 17 ft (5 m) of static mixing line
  • 30:1 solvent flush pump
  • XHF Gun with 429 tip.

• Certified Coating Thickness Standard – Ferrous
• 4 certified plates (0,75,250,1500um)
• Mounted in a protective bound folder
• Provides a hard wearing, benchmark reference standard to compare instrument readings against
• Accuracy ± 1%
• Coated Standards will wear over time and should be annually checked and certified
• Ideal for accuracy check & calibrating coating thickness instruments & gauges
• Includes a certified zero plate

• Mount Kit includes 2 mounts and screws (NV3-727/8)
• Suits RPB Nova3 Blast Helmet
• Used to repair the helmet
• Sold as a complete kit

Genuine Parts – Manufactured by RPB Safety

The PosiTest CMM – DeFelsko’s solution for accurate comparative concrete moisture measurements.  Simple and powerful, it offers a convenient way to conform to ASTM F2659.  Selected features as follows:

• Simple Design.  Simply placing the DeFelsko CMM directly on a clean, concrete floor gives a quick moisture measurement. It is a non-destructive test and doesn’t require holes to be drilled in the concrete slab or screed.
• Fast.  The CMM gives instant readings.
• Robust.  Sturdy IP65 construction offers weatherproof, dust proof, and water resistance.  Shock resistant too!
• Easy to use.  For large areas, the optional DeFelsko Telescopic Extender eliminates the need for kneeling to perform the tests.
• Capable. Tests concrete moisture to depths of ¾ or 1 inch.  Integrates with PosiSoft software via USB cable for reporting.

Note:  ASTM 2659 standardizes testing criteria for comparative moisture testing on concrete and cement floors.  This instrument is not intended to test moisture levels deep within the slab, and is recommended to be used as a moisture comparator.

• For blast and vacuum work with no abrasive recycling, when only virgin abrasive is to be used
• Blast up to 3.0 m2 per hour
• 1.0 cu ft / 28 litres abrasive capacity of blast vessel
• Minimum air supply of 200cfm/100psi is required to run this unit
• Excellent portability, plus the productivity benefits of pressure blasting
• 100% compressed air driven – no electricity required

The PosiTest® HHD – DeFelsko’s solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.

• Advanced pulse or continuous DC technology
• Lightweight and ergonomic design
• Auto voltage calculator based on coating thickness
• Multiple electrode options with custom availability
• Long Form Certificate of Calibration included

Available in 4 Kit options as follows:

• PosiTest HHD Kit (2 versions)
  • Stick-type with Pulsed DC Output
  • 72 Wh Li-ion battery pack with built-in charge indicator
  • Durable Pelican Storm Case
  • 20″ Electrode Rod (or substitute 5″ Electrode, with suffix -S after the part number)
  • Shoulder Strap
  • 25′ earthing cable and smart charger with universal AC voltage input
• PosiTest HHD Basic Kit (same as above HHD kit except for the following)
  • 36 Wh Li-ion battery pack instead of 72 Wh
  • Hard Shell Case instead of Pelican Case
  • 5″ Electrode Rod
• (Note – the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
• PosiTest HHD C Kit
  • Wand-type with Continuous DC Output
  • 18650 Li-ion Batteries (4)
  • Hard Shell Case
  • Extension rod is not required, but available

Several options are available for PosiTest HHD instruments, including:

• Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
• Flat Wire Brush Electrodes
• Half-Circle Brush Electrodes
• Electrode Adaptors, makes other brands of electrodes compatible with the HHD
• Electrode Rods (for HHD) and Extension Rod (for HHD C)

Note:  For coating thicknesses between 0 and 20 mils (0-500 microns), the PosiTest LPD is recommended.

BlastOne offers all DeFelsko products, including testing instruments, their accessories, and related supplies.

This group of mechanical gauges use rare-earth cobalt magnets to manually measure coating thickness on ferrous substrates. Additional information:

• Simple.  Straightforward and able to be used in any orientation.
• Capable.  Scales available in both mils and microns, and in 2 thickness ranges.  Can measure coatings on cylindrical surfaces too.  Go / No-Go button can be set for rapid measurement.
• Sturdy.  Wear-resistant carbide probe and rugged housing for years of service.

• Wet sponge spark tester
• Test coatings up to 12 mil (300 micron)
• Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick
• Audible pinhole-detection alarm
• Powered by three AA batteries
• Kit includes detector probe unit, earth lead with alligator clip and instructions

BlastOne offers all instruments and accessories from the DeFelsko product line.

These rolling springs are the electrodes suited for DeFelsko® high voltage holiday detection on steel pipes, and additional information is as follows:

• Multiple sizes available, 4-36″
• Each electrode includes two pre-installed spring couplers. Replacement couplers are available in packs of 2.
• Requires one Spring Connector to connect either DeFelsko or SPY spring electrodes to PosiTest HHD (sold separately).
• Sold Individually

Replacement Bulb

• Pins: 2; Volts: 12v; Watts: 20W; Compatible: Brite-Blast nozzle light
• Bulb for Halogen
• Replacement Halogen Bulb for 12v Blast Light BL3070 – Bulb only
• Suits 3070 corded sand blast lights

• Replacement kit for RPB® Radex Breathing Airline Filter
• Sold as set of 2 rings

• Abrasion-resistant, flex-coated control cable
• 12 Volt rated for electric deadman controls
• 3-Pin Twistlock connectors used for all deadman cables
• 2-wire is used for Battery connections only
• Optional heavy duty cable for use with steel grit or other high wear areas

• Suits Manual Blow Down Blast Pots – Thompson Valve or Tera Valve Style
• Complete Conversion Kit to reduce sound to 110 dB
• Handles any abrasive that may be escaping out of the blast pot
• Sold as a Field Assembly Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Goes on blast pot leg)
  • Blowdown Hose Assembly
  • Ball Valve and required fittings
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt

• Supplied as five plate set (zero plate and four coated thickness plates) mounted in a protective bound folder
• Provides a hard wearing, benchmark reference standard to compare instrument readings against
• Accuracy ±1%
• Coated plates supplied: 0 to 500 micron range
• Other size range thickness plates available to order
• Coated standards will wear over time and should be annually checked and certified