Home / Industrial Sandblasting And Construction Safety Lights
Industrial Sandblasting and Construction Safety Lighting
From halogen to LED, hose and helmet and body mounts, to explosion proof and linkable worksite lighting, BlastOne offers a range of productivity and safety lights for all budgets and requirements.
Should you have a special application and need advice, please don’t hesitate to reach out to our customer service.
Used in a blastroom where a large object may block illumination from wall or ceiling mounted lamps
Used on-site when natural lighting is blocked e.g. tank interior
5 different light settings
4 Hour Li-ion rechargeable battery
Being helmet mounted, light follows the movement of the operators head, shining where they are looking.
Peel off lens protection
By using LED bulbs, light has a low heat output
Sold as a Kit which includes;
* L4 light complete kit
* Battery recharger and power supply
* Clip accessories to mount to the Nova 3 Helmet
* Battery pack and belt
Used in a blastroom where a large object may block illumination from wall or ceiling mounted lamps
Used on-site when natural lighting is blocked e.g. tank interior
Used in a blastroom where a large object may block illumination from wall or ceiling mounted lamps
Used on-site when natural lighting is blocked e.g. tank interior
Used for area illumination in explosive environments, particularly limited access sites.
Used for area illumination in explosive environments.
Used for area illumination in explosive environments, particularly for large areas or over long distances.
Hazardous location LED lighting.
Benefits
Most Economical Blast Light Available
Low voltage 12 volt operation for operator safety
5 different light settings
4 Hour Li-ion rechargeable battery
Being helmet mounted, light follows the movement of the operators head, shining where they are looking.
Peel off lens protection
By using LED bulbs, light has a low heat output
Sold as a Kit which includes;
* L4 light complete kit
* Battery recharger and power supply
* Clip accessories to mount to the Nova 3 Helmet
* Battery pack and belt
Rechargeable – no need for power leads
Depending on power level battery will last 6 to 12 hours i.e., a full shift
Hazardous environment ratings: Area of Classification Zone 1 and 2 (gas), Zone 21 and 22 (dust)
Blast light choice comes down to three factors – luminaire type, budget, and safety concerns. The luminaire will be either a LED or a halogen lamp. LED units are more expensive but provide advantages over halogen lamps. Halogen lamp units are lower cost. Helmet mounted lights ensure the illuminated area is the same as the direction the operator is looking.
However, for those working in potentially combustible environments – a CERTIFIED EXPLOSION PROOF light is critical. Such lights are obviously going to be more expensive, but trust they are worth the life and limb of yourself and everyone else within range of a potential explosion.
Common Issues With Blast Lights?
Glass fronted blast lights have lenses that are broken by impact. Halogen lamps put off considerably more heat than LED lamps. This make them hot while in use and makes the glass lens more brittle. A more brittle lens breaks easier. Halogen bulbs are more easily broken than LED lamps
Important Considerations For Choosing The Right Blasting Light
What is your budget? High end or low end?
What length of cable do you want?
Will the light be battery powered or mains powered?
If you choose a low budget unit, are you prepared for higher spare parts consumption?
Helmet mounted or hose mounted?
Do you want to repair / replace spares yourself?
Frequently Asked Questions
What is the range of light output?
From 295 to 1200 lumens depending upon selected light.
What are the power options?
12 volt or mains power
What spare parts valuable?
Replacement lamps, lenses, retaining ring and gaskets. Some models have tear off lenses.