Abrasives
Showing all 14 results
-
Stainless Steel Shot
- Manufactured chronital stainless steel shot abrasive
- Can be recycled many times
- Stainless Steel Abrasives are also used in applications where there can be no ferrous contamination
- Used mainly in an air-blast application to create a specific desired finish or where a non-ferrous abrasive is required
- Sharp edges gradually round over as it wears
- Packed in 25kg bags
- Made by Vulkan Shot
- Grittal Stainless Steel Grit also available
-
- Manufactured glass abrasive
- Miniature, translucent glass spheres
- Spherical beads impart a satin or matte 'shot peened' finish to the work surface
- Widely used in hand cabinets for surface cleaning rather than surface etching
- Can be recycled
-
- General purpose blend of Garnet AbrasiveÂ
- Will achieve a 50-100 micron profile
- Typical consumption rate 320 kg/hr
- Typical blasting rate 15-20 m2/hr
- Inert, natural mineral
- Pinkish to reddish-brown, sub-rounded grains
- High performance, low dust abrasive
- Economical, single use abrasive which may also be recycled
-
Also known as Brown Fused Alumina, Brown Fused Aluminium Oxide Abrasive Media Is a Long Lasting and Sharp abrasive used for high-performance applications and general industry use. Aluminium oxide is very hard and aggressive and is commonly used for mixing with paint coatings for nonslip surfaces.
-
GCHECKKITFNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITFNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
- Manufactured cast haematite iron abrasive
- Grey, angular granules
- High performance, hard, sharp abrasive
- Used in airblast rooms
- Maintains sharp angular shape as it wears
- Can be recycled many times
- Packed in 25kg bags
-
- Ideal for sandblasting new steel garnet blasting sand to remove milscale
- #80 grain size
- Will achieve a 40-60 micron profile
- Typical consumption rate 250 kg/hr
- Typical blasting rate for Milscale removal 20 m2/hr
- Inert, natural mineral
- Pinkish to reddish-brown, sub-rounded grains
- High performance, low dust garnet abrasive
- Economical, single use abrasive which may also be recycled
-
- Perfect Blend of Garnet Abrasive blasting media for coating removal projects
- Will acheive a 60-100 micron profile
- Typical consumption rate 320 kg/hr
- Typical blasting rate for coating removal 15-20 m2/hr
- Inert, natural mineral
- Pinkish to reddish-brown, sub-rounded grains
- High performance, low dust abrasive media
- Economical, single use abrasive which may also be recycled
-
GMA ToughBlast is our engineered blend for superior cleaning on tough jobs. High performance all-around garnet abrasive.
- Coating removal thickness: 380 - 760 ¼m
- Uniform surface profile: 70 - 90 ¼m
- Blasting rates: Up to 30 m²/hr
- Consumption rate: As low as 16kg/m²
- Dust factor: Low/Medium
- Recyclability: 4/10
- Mesh sizes: 16, 36
- MilSpec Approved Garnet Abrasive
-
- Manufactured cast steel abrasive
- Used mainly in airless wheel blast machines
- Blue grey, angular granules (GL = blue, GH = grey)
- Can be recycled many times
- High performance, cleaning and descaling abrasive
- Sharp edges gradually round over as it wears
- Standard GL and GH hardness grit
- Special GP hardness and other specifications available
- Manufactured to conform to: SAE J444, SAE J1993, SFSA 20-66
- Hardness: GL = 56-60 HRc, GH = 60-65 HRc
- Packed in 25kg bags
-
Steel Shot Abrasive in Australia
- Steel shot - manufactured hypereutectoid, metal spheres used in airless centrifugal wheel blast machines to clean foundry castings, surface polishing and shot peening
- Also used in portable trackblast airless wheel blast machines for concrete floor preparation, blasting ship decks and profiling
- Quality Steel Shot is very long lasting
- Steel Shot can be recycled many times
- Hardness: 40-50 HRc. Other hardness's of steel shot are available on request
- Special, Stainless Steel Shot and High Hardness, Milspec (Military Specification Peening Steel Shot) specification shots available
- Manufactured to conform to: SAE J444, SAE J827, SFSA 20-66
- Steel Shot is packed in 25kg bags, drums or bulk bags
- BlastOne is a leading steel shot supplier in Australia & New Zealand
-
Also known as White Fused Alumina, White Fused Aluminium Oxide Abrasive Media Is a Clean and Sharp abrasive used for high-performance and delicate blasting and cleaning projects, including cleaning of hi-tech metals. White Fused Alumina is an inert material with excellent abrasive qualities & available from most BlastOne branches in Australia and New Zealand. Brown aluminum oxide also available.