My Account
Air Compressors
BlastOne Site Solutions sells a range of Chicago Pneumatic Air Compressors. Chicago Pneumatic is a market leading manufacturer of air compressors with 120 years of experience behind them, ensuring reliable and efficient products. Chicago Pneumatic compressors have been used for sand blasting for decades.
From utility air to fit on the back of your service truck through to portable towable units for site works. Models available with a flow range from 75 cfm to 850 cfm and pressure range from 100 psi to 200psi, BlastOne Site Solutions has an air compressor to match your needs, including abrasive blasting cleaning & sand blasting operations.
Don’t hesitate to contact one of our helpful representatives to offer you the solution you deserve!
Showing all 5 results
-
- Diesel Compressor with steel Canopy
- Boxed unit with support mounts
- Spillage free frame & AS1210 vessel including aftercooler and water separator
-
- CPM, CPD, CPE, CPF & CPVS range of stationary electric compressors.
- Available in fixed or variable speed models.
- Silenced, single stage, oil injected screw element powered by a 400 Volt, 50 Hz 3 phase motor.
- Normal effective working pressures range between 4 to 13 bar (58 - 188 psi).
- Flow range between 27 - 1887 cfm (13 - 890 L/s).
-
- Diesel Compressor with Polyethylene Canopy
- Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel and LED road lights
- Spillage free frame & AS1210 vessel including aftercooler and water separator
- Normal effective working pressure range from 7-12 bar (100-175 psi) Flow 80-180 cfm (38-88 L/s)
-
- Diesel Compressor with steel canopy
- Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel (select models)
- LED road lights (select models)
- Spillage free frame & AS1210 vessel including aftercooler and water separator
-
- X-AIR and XAVS Diesel Compressors
- Silenced, single stage, oil injected screw element powered by a liquid cooled, six cylinder Caterpillar engine.
- Comes standard with AirXpert 2.0, OilXpert, new improved vessel design, Eco mode and Fleetlink telematics.
- Normal effective working pressure between 5 to 14 bar (72 - 150 psi).
- Flow between 1235 - 1136 cfm (583 - 536 L/s).
Using an Air Compressor for abrasive blasting? An Air Compressor is one of the most important tools that a blasting operator needs.
We typically say, allow up to 500 cfm per blasting operator. This will ensure that you have ample air for the compressor to not have to run at full capacity all day, every day. A # 8 blast nozzle uses close to 400 cfm, which means you have little left for any leaks, pressure loss, spray pumps, air fed blast helmets and other associated tools and equipment that are found on jobsites.