Blasting Parts & Consumables
Showing 61–75 of 156 results
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Combination Nipples, to connect vacuum equipment to vacuum hose
- Barbed hose tail on one end, male thread on the other
- Made from zinc-plated steel (other types available)
- Easy to install and remove for hassle-free maintenance
- Single Sizes and Jump Sizes Available
-
HATZ16810
- Safety Lens (16-810)
- Suits RPB Z-Link Respirator
- Anti-fog /anti-scratch to give the wearer long time clear vision
- Suitable for welding / grinding / painting / inspection
- Sold Individually
HATZ16810- Safety Lens (16-810)
- Suits RPB Z-Link Respirator
- Anti-fog /anti-scratch to give the wearer long time clear vision
- Suitable for welding / grinding / painting / inspection
- Sold Individually
-
HAZ16810MT
- Safety Lens (16-810-MT)
- Mirror Tint
- Anti-Fog / Anti-Scratch
HAZ16810MT- Safety Lens (16-810-MT)
- Mirror Tint
- Anti-Fog / Anti-Scratch
-
HANVZ811
- Replacement outer lenses for the RPB Z-Link Respirator helmet (16-811)
- Tear-off are easily removable
- Keep vision field clean and clear without removing helmet
- Pack of 50
HANVZ811- Replacement outer lenses for the RPB Z-Link Respirator helmet (16-811)
- Tear-off are easily removable
- Keep vision field clean and clear without removing helmet
- Pack of 50
-
HANVZ16872
- Suits RPB Z-Link ADF Shield (Auto-Darkening Filter) for welding (16-872)
- Used to protect the filter from damage and wear
- Pack of 10
HANVZ16872- Suits RPB Z-Link ADF Shield (Auto-Darkening Filter) for welding (16-872)
- Used to protect the filter from damage and wear
- Pack of 10
-
HANVZ16873
- Welding ADF Rear Lens (16-873)
- Pack of 10
HANVZ16873- Welding ADF Rear Lens (16-873)
- Pack of 10
-
Nozzle holder for blast hose
- Connects the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium Mitey-Mite Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse Contractor Thread *Contractor Favourite*
- Reference the table below for the size to fit your blast hose
- Available in Nylon, Brass or Aluminium
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
-
- Rugged, compact design Auto Air inlet remote control valve for deadmen system
- Typically used in conjunction with the Thompson Valve
- Low pressure drop across valve increases production
- Also Known As - "Gatekeeper"
- Commonly used on Schmidt abrasive blasting and Axxiom Manufacturing abrasive blast machines and blasting pots
-
BAP2100011
Ensure the efficiency of your Schmidt® Blast Pot with the "Pop-Up Seating Ring" (SKU: BAP2100011). This Polyurethane ring is specifically designed for 3.5-20 cu.ft S-Series Blast Pots, ensuring a precise fit and optimal performance.
Polyurethane Pop-Up Seating Ring
- 2100-011
- Large Pop-Up Seating Ring for 3.5-20 cu.ft S-Series Blast Pots
- RING ONLY
BAP2100011Ensure the efficiency of your Schmidt® Blast Pot with the "Pop-Up Seating Ring" (SKU: BAP2100011). This Polyurethane ring is specifically designed for 3.5-20 cu.ft S-Series Blast Pots, ensuring a precise fit and optimal performance.
Polyurethane Pop-Up Seating Ring
- 2100-011
- Large Pop-Up Seating Ring for 3.5-20 cu.ft S-Series Blast Pots
- RING ONLY
-
DMRMS2002
- Exhaust Muffler for RMS
- Effective noise attenuation
- Flow-through design
- Female thread connection port
DMRMS2002- Exhaust Muffler for RMS
- Effective noise attenuation
- Flow-through design
- Female thread connection port
-
BAPSP24Pop-Up Umbrella Spider Plate for 24" large blast pot
- Sits above pop-up valve. Allows valve to pop-up easily when a head of abrasive is stored above the blast machine
- Used in auto-loading applications such as blastrooms, recovery systems etc.
BAPSP24Pop-Up Umbrella Spider Plate for 24" large blast pot- Sits above pop-up valve. Allows valve to pop-up easily when a head of abrasive is stored above the blast machine
- Used in auto-loading applications such as blastrooms, recovery systems etc.
-
FMSL50TM
- Coupling Sure lock
- BlastOne Surelock Coupling - 2" BSP(M)
FMSL50TM- Coupling Sure lock
- BlastOne Surelock Coupling - 2" BSP(M)
-
BA840800079
- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
BA840800079- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
-
GV213000099
- OEM Rebuild Kit for TeraValve™ XL
- Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
- Schmidt® / Axxiom part # 2130-000-99
- Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010
GV213000099- OEM Rebuild Kit for TeraValve™ XL
- Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
- Schmidt® / Axxiom part # 2130-000-99
- Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010
-
HLNV2004
Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.
- Suits RPB Nova 2000 Blast Helmet
- Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
- Sold as a Kit including;
- Complete Latch with screws
- Genuine Parts - Manufactured by RPB Safety
HLNV2004Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.
- Suits RPB Nova 2000 Blast Helmet
- Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
- Sold as a Kit including;
- Complete Latch with screws
- Genuine Parts - Manufactured by RPB Safety