My Account
All Products
Showing 61–75 of 617 results
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 6 to 8 inch fan width (XHD3 series).
- In this group, the orifice sizes range from .007 to .055 inches (sizes 307 to 355).
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
-
HLNV37341- Head liner clips are used to hold the head liner in the blast helmet
- Suits RPB Nova3 Blast Helmet
- Sold as a packet of 4
HLNV37341- Head liner clips are used to hold the head liner in the blast helmet
- Suits RPB Nova3 Blast Helmet
- Sold as a packet of 4
-
HLNV3734- Head Liner Kit (NV3-734) includes
- Tough polystyrene foam shell
- Soft top of head padding
- 4x HLNV37341 Clips
- Sold as a complete kit
- Suits RPB Nova3 Blast Helmet
HLNV3734- Head Liner Kit (NV3-734) includes
- Tough polystyrene foam shell
- Soft top of head padding
- 4x HLNV37341 Clips
- Sold as a complete kit
- Suits RPB Nova3 Blast Helmet
- Head Liner Kit (NV3-734) includes
-
- Male threads at both ends
- Carbon steel construction
- Optional stainless steel also available
- Various seal material options for fluid compatibility
- Mount on the high-pressure filter outlets for the control of individual spray lines
- Can be used as a priming-drain valve
- Premium PEEK Seals have more than double the life of Teflon
-
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 6mm
- Male NPT Threaded End 6mm
- Sold Individually
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 6mm
- Male NPT Threaded End 6mm
- Sold Individually
-
VCBV2605- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an inside corner
- Sold Individually
VCBV2605- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an inside corner
- Sold Individually
-
VCBV2705- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an outside corner
- Sold Individually
VCBV2705- Suit Blast and Vac Workhead VCBV200
- Replacement inner and outer brushes create a seal with the surface to capture dust and abrasive
- Suitable for blasting an outside corner
- Sold Individually
-
HLNV2012- Suits the RPB Nova 3 and Nova 2000 Airfed Blast Helmet
- Inner Bib zips inside the helmet cape to prevent inward leakage of any dust or particles
- Provides a non-scratching seal around the blasters neck
- Can be easily removed and washed
- Sold individually
- Genuine Parts - Manufactured by RPB Safety
HLNV2012- Suits the RPB Nova 3 and Nova 2000 Airfed Blast Helmet
- Inner Bib zips inside the helmet cape to prevent inward leakage of any dust or particles
- Provides a non-scratching seal around the blasters neck
- Can be easily removed and washed
- Sold individually
- Genuine Parts - Manufactured by RPB Safety
-
General purpose air connection fittings- This is the Reducing Bushing group
- Many sizes available
- Many materials available, including Stainless Steel, Brass, Galvanized Malleable Iron, and Iron
- 150 psi rated
-
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
-
- MegaFlow heavy duty air supply bull hose
- Used supply the large volumes of air required for sandblasting
- Made from high-quality rubber compounds that are oil resistant
- Tuff, UV resistant outer cover ensures it doesn't break down in the sun
- Nylon braiding to make it more flexible and easier to man-handle
- Rated to 300psi with 3:1 safety factor
- Fitted Bull Air Hoses also available
-
Boost your Bristle Blaster®'s efficiency with genuine MontiPower® Accelerator Bars (SKU: P-HTROTZUAB). Designed to enhance the velocity of bristle movement, these durable bars are available in carbon steel and stainless steel to suit various surface preparation tasks.
Features:
- For use with Bristle Blaster tools for enhanced performance.
- Material options: Standard carbon steel or corrosion-resistant stainless steel.
- Convenient packaging: Sold in packs of 5 for cost-effectiveness and convenience.
- Genuine MontiPower part ensures optimal compatibility and durability.
- 30-day money-back guarantee with free returns.
-
Upgrade your Bristle Blaster® with the patented MontiPower® Replacement Adapter System (SKU: P-HTROTAS). This innovative system improves performance and ensures safe, vibration-free operation, delivering exceptional surface preparation results.
Features:
- Patented technology: Ensures vibration-free and precise surface preparation. Enhanced safety: U-shaped wire anchors prevent bristle ejection.
- No heat development: Avoids toxic fumes or material smearing.
- Flexible design: Ideal for contoured and sharp-edged areas.
- Optimized durability: Hardened wire tips rated at up to 68 HRC for extended service life.
- Compatible with Bristle Blaster® systems.
-
HLNV37278- Mount Kit includes 2 mounts and screws (NV3-727/8)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet
- Sold as a complete kit
HLNV37278- Mount Kit includes 2 mounts and screws (NV3-727/8)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet
- Sold as a complete kit
