All Products
Showing 106–120 of 620 results
-
- For attaching couplers and nozzle holders to blast hoses
- Used in conjunction with a small amount of silicon to install couplings
- Domehead or Countersunk
- SEE Screw Selection CHART in Additional Information below for proper sizing
- Sold in packs of 200
-
DMRMCATCK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 25mm abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
-
HLNV3731
- Kit includes L & R Side Padding Frames (NV3-731)
- Suits RPB Nova3 Blast Helmet
- Used to hold the side pads which encase the blasters ears
- Sold as a complete kit
HLNV3731- Kit includes L & R Side Padding Frames (NV3-731)
- Suits RPB Nova3 Blast Helmet
- Used to hold the side pads which encase the blasters ears
- Sold as a complete kit
-
The Testex tape process of measuring surface profile has been used for over 50 years. It is a simple, reliable, and repeatable way of determining surface profile parameters. DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors. DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging. NOTE - the profile ranges are not entirely the same between them - their respective ranges are shown under the Product Description tab. Tape options include the following:
- Conventional Testex Press-O-Film Tape grades.
- Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
- Optical Grade Testex Press-O-Film Tape Grades
- Use with PosiTector RTR 3D probe. Provides surface data files (.sdf) that allow both 2D and 3D measurements.
- Conventional Testex Press-O-Film Tape grades.
-
GR206995
- Throat Seal Liquid
- Size: 1 quart (0.95 Ltr)
- Package: Bottle
- Prevents paint drying on the displacement rod and packings
- Check the pump throat and top up the liquid daily
GR206995- Throat Seal Liquid
- Size: 1 quart (0.95 Ltr)
- Package: Bottle
- Prevents paint drying on the displacement rod and packings
- Check the pump throat and top up the liquid daily
-
GR206994
- 8-ounce bottle of Throat Seal Liquid (TSL).
- Prevents paint drying on the displacement rod and packings, reducing wear.
- Extends component life of your paint spray pumps.
- Specially formulated to dissolve material on displacement rods.
- Suitable for all Paint Spray Pumps.
- Ensures throat seal packings remain lubricated, preventing the pump from running dry.
- Genuine Graco-manufactured part.
GR206994- 8-ounce bottle of Throat Seal Liquid (TSL).
- Prevents paint drying on the displacement rod and packings, reducing wear.
- Extends component life of your paint spray pumps.
- Specially formulated to dissolve material on displacement rods.
- Suitable for all Paint Spray Pumps.
- Ensures throat seal packings remain lubricated, preventing the pump from running dry.
- Genuine Graco-manufactured part.
-
GV2410322SP
- Spring-Loaded Collar for Tri-Clover
- Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
- This is the version that is used on our GV2410320SPBV
GV2410322SP- Spring-Loaded Collar for Tri-Clover
- Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
- This is the version that is used on our GV2410320SPBV
-
GV2410323
- Replacement FLO Ring Gasket for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Recommended spare part
GV2410323- Replacement FLO Ring Gasket for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Recommended spare part
-
For industrial conventional painting applications, BlastOne stocks both OEM Graco and aftermarket hoses. All configurations available.
-
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:
- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
-
RUBVD422009BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V700 and includes the following:
- ESCON 70/10 Motor Controller CB4.0
- Actuator 90mm with Connector
- V700 WCS with Connector
- Limit Switch with Connector
- Harting Han-Eco Locking Lever
- Swingarm Clamp with Shaft, includes key
- Gearbox 050 with Flange
- V700 Motor Assembly
- Relay Module
- Castor Wheel
RUBVD422009BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V700 and includes the following:- ESCON 70/10 Motor Controller CB4.0
- Actuator 90mm with Connector
- V700 WCS with Connector
- Limit Switch with Connector
- Harting Han-Eco Locking Lever
- Swingarm Clamp with Shaft, includes key
- Gearbox 050 with Flange
- V700 Motor Assembly
- Relay Module
- Castor Wheel
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Combination Nipples, to connect vacuum equipment to vacuum hose
- Barbed hose tail on one end, male thread on the other
- Made from zinc-plated steel (other types available)
- Easy to install and remove for hassle-free maintenance
- Single Sizes and Jump Sizes Available
-
-
GR224468
- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 153mm Long and about 25mm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #100 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
GR224468- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 153mm Long and about 25mm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #100 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts