Sandblasting Hoses & Ducting
Industrial Sandlasting Hoses and Ducting Built To Take The Rigors Of Contracting
The blast hose is an integral part of any abrasive blasting system. That is why high quality blast hoses and ducting should be selected and insisted on instead of poorly designed ones constructed with poor quality materials. BlastOne has is a sandblast & airhose supplier, and can provide certification and compliance to Specific Standards regarding Flexible Hose Assemblies, with BlastOne’s ISO9001 accredited quality procedures. All blast hose & bull hose fittings are connected using stringent proven & tested assembly procedures.
Cheap blast hoses which seem a good bargain at the time are available, but when the true quality begins to show, the reality is you have paid too much for an inferior product. If cheaper abrasive blasting hose has been made from recycled rubber, the probable life of the hose could be be as meager as 150-200 hours. With a high quality sandblast hose, the expectant life is 400-500 hours (depending on abrasive used).
It’s not only the quality, cost and how long it lasts – but will your blast hose protect you from electric shock? The safety factor should come into the equation when making this important purchase.
Showing all 12 results
-
- MegaFlow heavy duty air supply bull hose
- Used supply the large volumes of air required for sandblasting
- Made from high-quality rubber compounds that are oil resistant
- Tuff, UV resistant outer cover ensures it doesn't break down in the sun
- Nylon braiding to make it more flexible and easier to man-handle
- Rated to 300psi with 3:1 safety factor
- Fitted Bull Air Hoses also available
-
- Fitted Blast Hose
- Premium blast hose fitted with couplings only
- We have many ways to fit a blast hose
- For a Extension hose we recommend you use 4 ply type
- Fitted and Quality Controlled by BlastOne Trained Staff
-
- Fitted Blast Hose
- Premium blast hose fitted with couplings and nozzle holder
- We have many ways to fit a blast hose
- For a Whip hose we recommend you use 2Ply type
- Most common composition is Aluminum Coupling with Contractor Thread Nylon Nozzle holder
- Fitted and Quality Controlled by BlastOne Trained Staff
-
BHBULL5020
- MegaFlow heavy duty air supply hose
- 20 metre coil
- 2 inch internal diameter
- 300 psi pressure rated with 3:1 safety factor
- Supersynthetic oil resistant liner, durable UV resistant wrapped outer cover
- Temperature range: -22°F (-30°C) to +158°F (+70°C)
BHBULL5020- MegaFlow heavy duty air supply hose
- 20 metre coil
- 2 inch internal diameter
- 300 psi pressure rated with 3:1 safety factor
- Supersynthetic oil resistant liner, durable UV resistant wrapped outer cover
- Temperature range: -22°F (-30°C) to +158°F (+70°C)
-
AVAILABLE FOR RENTAL OR PURCHASE
- MegaFlow heavy duty air supply bull hose
- Fitted with your choice of industrial fittings
- Fitted by Trained and Certified BlastOne Technicians
- Rated to 300psi with 3:1 safety factor
- Always use with safety whipchecks
-
- Unfitted Blast Hose
- Superior quality, lightweight and highly flexible sandblasting hose
- Blast Hoses have anti-static, natural rubber liner
- Rated to minimum 175 psi - 3:1 safety factor
- Made to BlastOne Blast Hose specifications
- Robust TuffRap outer blasting hose cover
- Light Wall Blast Hose
- Commonly known as supa hose or supahose
- Fit with your choice of nozzle holder and couplings
- Supplied as a bare hose coil or as a Certified Blast Hose Assembly certificate is available upon request
-
- Unfitted Blast Hose
- High quality, long lasting sandblasting hose
- Blast Hoses have a thick, anti-static, natural rubber liner
- Made to BlastOne Blast Hose specification
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap™ outer blasting hose cover
- Heavy Wall Unfitted Blast Hose
- Recommended for use as an extension hose
- Fit with your choice of couplings
- Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.
-
AVAILABLE FOR RENTAL OR PURCHASE
- Tigerflex is the most preferred vacuum hose in the abrasive blasting market
- Has Anti-static properties to reduce static shock to the operators
- Special rubber compounds ensure high levels of abrasion resistance
- TigerFlex Vacuum hose is suitable for recovering and moving large quantities of abrasive abrasive blast media.
- Comes in many sizes, select your size
-
Ensure safety with the Safety Whipcheck for Hose Connections (SKU: P-HFSCA). Designed for hoses from ½" to 3½", these steel-constructed whipchecks restrain hoses during unexpected disconnections.
- Use of a safety whipcheck restraint is mandatory on all hoses
- Whip checks are of steel construction
- HF SCA-1 cable suits hoses ½" to 2 ½"
- For use on Blast hoses (15 mm to 60 mm) OD
- HF SCA-2 cable suits hoses 2" to 3½"
- For use on blast and bull air hoses (45 mm to 90 mm) OD
- Whip Checks restrains hoses in the event of a failure or accidental disconnection
-
DCD2033HDust Collector Ducting
- 20" (500 mm) Internal Diameter
- 10 metre length
- Heavy Duty with Wear Strips and Rope Tabs
- Tough coated membrane wrapping
- Spiral reinforcing ribs for suction applications
- 'Concertinas' for compact transportation and storage
- Can be used under negative or positive pressure
- can be used in mining applications
DCD2033HDust Collector Ducting- 20" (500 mm) Internal Diameter
- 10 metre length
- Heavy Duty with Wear Strips and Rope Tabs
- Tough coated membrane wrapping
- Spiral reinforcing ribs for suction applications
- 'Concertinas' for compact transportation and storage
- Can be used under negative or positive pressure
- can be used in mining applications
-
DCDJ20
- Suits 20" Flexible Dust Collector Ducting
- Duct Joiner is used to join Two Dust Collector Ducts into a longer length
- Uses a Duct Joiner clamp to ensure the ducts stay together
- Sold Individually
DCDJ20- Suits 20" Flexible Dust Collector Ducting
- Duct Joiner is used to join Two Dust Collector Ducts into a longer length
- Uses a Duct Joiner clamp to ensure the ducts stay together
- Sold Individually
-
DCDC20E
- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Uses a simple snap handle, which allows easy installation and removal
- Sold Individually
DCDC20E- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Uses a simple snap handle, which allows easy installation and removal
- Sold Individually
BULL HOSE
Contact BlastOne for Quality Bull Hose for unrestricted air supply for your sand blasting system
FLEXIBLE DUCTING FOR PORTABLE VENTILATION FANS
Contact BlastOne for all your ventilation ducting requirements for mobile dust collectors & portable ventilation fans
AIR HOSE
BlastOne SupaLife blast hose is manufactured using virgin natural rubber with carbon black graphite. This has anti-static qualities to eliminate the problem by dissipating the static electricity through the wall of the blast hose. BlastOne’s high quality SupaLife sandblast hose is constructed using a 2-ply or 4-ply arrangement – highly woven cord lining which are placed in a cross ply pattern to add strength, but still allow the blast hose the flexibility that it requires.
BlastOne carries in-stock a wide selection of blast hoses, nozzles and couplings. All our blast hoses offer the greatest resistance therefore equipped for the toughest jobs and applications.