Blasting
Showing 136–150 of 367 results
-
VAVacuInt55
- Capacity of 4 tons of garnet
- Designed to sit between the VacuLoad and the vacuum head
- Separates abrasive and 90% of dust for reuse or disposal
- Available in 3 sizes – 20, 55, and 100 cu.ft
- Acts as a cyclone separator using power from the main vacuum unit
- No need for compressed air or electric power
- Ideal for abrasive storage
VAVacuInt55- Capacity of 4 tons of garnet
- Designed to sit between the VacuLoad and the vacuum head
- Separates abrasive and 90% of dust for reuse or disposal
- Available in 3 sizes – 20, 55, and 100 cu.ft
- Acts as a cyclone separator using power from the main vacuum unit
- No need for compressed air or electric power
- Ideal for abrasive storage
-
- Will transform your blast pot into a pressure hold system
- Retrofit Kit includes:
- Thompson Valve Series II with TC Sleeve
- Full pusherline kit
- Automatic air valve and all interconnecting hoses
- Control line strainer and pneumatic control valve
- Response pneumatic deadman handle and Twinline
-
GV214900099
- Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-99
- Repair Kit for Thompson Valve
- Complete Repair kit for Old Style Thompson Valve including the Tungsten Carbide Plunger
GV214900099- Schmidt abrasive blasting equipment / Axxiom Manufacturing part number 2149-000-99
- Repair Kit for Thompson Valve
- Complete Repair kit for Old Style Thompson Valve including the Tungsten Carbide Plunger
-
GV213000099
- OEM Rebuild Kit for TeraValve™ XL
- Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
- Schmidt® / Axxiom part # 2130-000-99
- Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010
GV213000099- OEM Rebuild Kit for TeraValve™ XL
- Includes Tungsten Carbide Sleeve & Plunger along with Seal kit
- Schmidt® / Axxiom part # 2130-000-99
- Includes: GV213000004, GV213000006, GV213000007, GV213000008, GV213000009, GV213000010
-
Have a good pot that you hate to throw away? The TeraValve™ Complete Blast Pot Retrofit Kit allows you to obtain state-of-the-art pressure-hold abrasive metering technology and save money in the process! Details as follows:
- Your existing pot must be structurally sound and must have at least 150mm clearance below it.
- The retrofit kit includes a new TeraValve™ as well as all other valves, piping, deadman handle/controls, and hoses required for a complete upgrade.
- Note: Handway and pop-up components are available separately, if needed. In addition, you may want to consider the optional VBS II muffler and/or a union-end ball valve / quick connect (if you have the necessary clearance). See Related Products below.
- Retrofit kits are available in either pneumatic or electric and are offered in both 32mm and 38mm valve sizes.
- Installation instructions are included in the box (and under the Documents tab here). If installation assistance is needed, call us for friendly tech support via phone or we can arrange to have our technicians perform the installation for you.
-
BMS10The “Mitey-Mite 1.0 cuft Blast Machine” (SKU: BMS10) offers efficient and reliable spot blasting, packed in a compact size. With a 70 kg Garnet capacity and micro valve metering, it's perfect for touch-ups.
- Smallest production style pot available
- The 1.0 cuft capacity will hold 70 kg of Garnet
- Ideal for in-plant or onsite touch up work
- Comes with Micro Valve Metering Valve
- Comes with moisture trap
- 1" Piping
BMS10The “Mitey-Mite 1.0 cuft Blast Machine” (SKU: BMS10) offers efficient and reliable spot blasting, packed in a compact size. With a 70 kg Garnet capacity and micro valve metering, it's perfect for touch-ups.- Smallest production style pot available
- The 1.0 cuft capacity will hold 70 kg of Garnet
- Ideal for in-plant or onsite touch up work
- Comes with Micro Valve Metering Valve
- Comes with moisture trap
- 1" Piping
-
BMS20
- 2.0 cuft capacity will hold 140 kg of Garnet
- Ideal for small shops or occasional blasting
- Comes with Micro Valve Metering Valve
- Comes with moisture trap
- 1" Piping
BMS20- 2.0 cuft capacity will hold 140 kg of Garnet
- Ideal for small shops or occasional blasting
- Comes with Micro Valve Metering Valve
- Comes with moisture trap
- 1" Piping
-
- Manufactured by Schmidt Abrasive Blasting & Axxiom Manufacturing to BlastOne specifications
- Valving system designed to have a maximum of 3psi pressure drop
- Specified Capacity (approx)
- 3.5 cu ft / 99 litres
- Abrasive Capacity (approx)
- Garnet - 230 kg
- Steel Grit - 390 kg
- Pressure Rating: 150psi
- Includes: Moisture separator and inlet fitting
-
*Most Popular Blast Pot*
- Manufactured by Schmidt to BlastOne specifications
- Valving system designed to have a maximum of 3psi pressure drop
- Specified Capacity (approx)
- 6.5 cu ft / 185 litres
- Abrasive Capacity (approx)
- Garnet - 430 kg
- Steel Grit - 700 kg
- Pressure Rating: 150psi
- Includes: Moisture separator and inlet fitting
-
- Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint /½ litre per minute) with proprietary Schmidt M.I.S.T. technology that allows precise control of the amount of water injected into the air stream while blasting
- Set and forget switching between machine modes
- Abrasive tank is dry so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Industry-leading productivity and reliability from Schmidt abrasive blasting technology
- Schmidt Tera Valve XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, and blow-off using a single control panel
- Increased portability
-
BMS1001TV
- 10.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Single outlet Thompson Valve II abrasive metering valve
- Approx 670 kg garnet abrasive capacity
- Comes with pnuematic deadman handle and 20m of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
BMS1001TV- 10.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Single outlet Thompson Valve II abrasive metering valve
- Approx 670 kg garnet abrasive capacity
- Comes with pnuematic deadman handle and 20m of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
-
BMS200
- 20.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Dual outlet Thompson Valve II abrasive metering valves
- Approx 1350 kg garnet abrasive capacity
- Comes with two pneumatic deadman handles and two lengths of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
BMS200- 20.0 cu ft Blast pot
- Manufactured by Schmidt to BlastOne unique specifications
- Dual outlet Thompson Valve II abrasive metering valves
- Approx 1350 kg garnet abrasive capacity
- Comes with two pneumatic deadman handles and two lengths of control hose
- Excellent for a blastroom application with 1-2 blasters
- Meets all Australian Standards
-
- The most versatile, easy-to-regulate dry blast machine on the market
- 10-150psi blasting pressure range
- With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate "metering" of hard-to-flow abrasives like Soda and fine Garnets
- With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types - fine to coarse
- With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
- G2 pneumatic deadman control, 55' twinline control hose, 55' water line with wet blast attachment for dust suppression included with purchase
- Genuine Products - Manufactured by Axxiom Manufacturing - Schmidt®
-
VCBRSMP
- Abrasive holding capacity of 0.3 cu ft / 8.5 liters
- Blasting rate up to 2.0 m2 per hour
- Compressed Air Requirement 185 cfm
- On wheels for easy access. Includes fork pockets
- Recirculating compact blast & recovery unit
- 100% compressed air driven - no electricity required
VCBRSMP- Abrasive holding capacity of 0.3 cu ft / 8.5 liters
- Blasting rate up to 2.0 m2 per hour
- Compressed Air Requirement 185 cfm
- On wheels for easy access. Includes fork pockets
- Recirculating compact blast & recovery unit
- 100% compressed air driven - no electricity required