Instruments
Showing 1–15 of 115 results
-
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUPINDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUP
-
DeFelsko has done it again! Now with an enhanced second version, their Dew Point Meter Logger instruments are award winners for remote monitoring of environmental conditions. Both PosiTector DPML models offer the ability to continuously monitor climatic conditions remotely. Both offer wireless connectivity to the PosiTector app. Data from both is uploadable to PosiSoft for generating reports. And now, the new DPML+ offers all the features of the original DPML, with 2 key upgrades, as follows:
- AAA battery power, providing enhanced recording time.
- WiFi enabled, offering continuous uploading of data to the PosiSoft software AND email alerts to users when climate conditions fall outside of user-defined limits.
-
The DeFelsko PosiTector® Inspection Kits (SKU: P-IND6000KIT) offer coating inspectors comprehensive, multi-probe tools for fast, accurate coating inspections. Key features include:
- Standard, Advanced, and Extreme configurations with multiple probe options
- Includes DPM, SPG probes, and coating thickness probes for all models
- Extreme kit adds RTR-H replica tape reader and DPM-L data-logging probe
- Comes with calibration certificate, shims, and protective hard case
-
INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3
-
INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.
-
INDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIPINDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIP
-
The Testex tape process of measuring surface profile has been used for over 50 years. It is a simple, reliable, and repeatable way of determining surface profile parameters. DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors. DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging. NOTE - the profile ranges are not entirely the same between them - their respective ranges are shown under the Product Description tab. Tape options include the following:
- Conventional Testex Press-O-Film Tape grades.
- Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
- Optical Grade Testex Press-O-Film Tape Grades
- Use with PosiTector RTR 3D probe. Provides surface data files (.sdf) that allow both 2D and 3D measurements.
- Conventional Testex Press-O-Film Tape grades.
-
INDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIPINDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIP
-
Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival. Best practice and specifications determine when instruments should have their calibrations rechecked. For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:
- B1. Standard range Imperial. Five steps (100, 200, 300, 400, and 500 mils).
- B1M. Standard range Metric. Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
- B2. High range Imperial. Eight steps (1", 1.5", 2", 2.5", 3", 3.5", 4", and 4.5").
- B2M. High range Metric. Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
- P. (Use with PosiTector UTG P probe.) Imperial labeled at 40, 60, 80, and 100 mils. (Metric equivalent 1, 1.5, 2, and 2.5 mm)
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.
-
The PosiTector® 6000 probe family - DeFelsko's solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers - many versions available for many different applications. Further details as follows:
- Familiar. These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies. In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
- Versatile. Checks coating thickness in many applications, including:
- Single-handed use (integral probes)
- Cabled probes in various lengths
- Hot / Rugged applications
- Very thin to very thick coatings
- and more!
-
INDAIRQuickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems. DeFelsko MPN: AIRINDAIRQuickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems. DeFelsko MPN: AIR