Holiday Pinhole Detection
Showing 16–21 of 21 results
-
The PosiTest® HHD - DeFelsko's solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.
- Advanced pulse or continuous DC technology
- Lightweight and ergonomic design
- Auto voltage calculator based on coating thickness
- Multiple electrode options with custom availability
- Long Form Certificate of Calibration included
- PosiTest HHD Kit (2 versions)
- Stick-type with Pulsed DC Output
- 72 Wh Li-ion battery pack with built-in charge indicator
- Durable Pelican Storm Case
- 20" Electrode Rod (or substitute 5" Electrode, with suffix -S after the part number)
- Shoulder Strap
- 25' earthing cable and smart charger with universal AC voltage input
- PosiTest HHD Basic Kit (same as above HHD kit except for the following)
- 36 Wh Li-ion battery pack instead of 72 Wh
- Hard Shell Case instead of Pelican Case
- 5" Electrode Rod
- (Note - the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
- PosiTest HHD C Kit
- Wand-type with Continuous DC Output
- 18650 Li-ion Batteries (4)
- Hard Shell Case
- Extension rod is not required, but available
- Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
- Flat Wire Brush Electrodes
- Half-Circle Brush Electrodes
- Electrode Adaptors, makes other brands of electrodes compatible with the HHD
- Electrode Rods (for HHD) and Extension Rod (for HHD C)
-
INDLPDKITB
- Wet sponge spark tester
- Test coatings up to 12 mil (300 micron)
- Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick
- Audible pinhole-detection alarm
- Powered by three AA batteries
- Kit includes detector probe unit, earth lead with alligator clip and instructions
INDLPDKITB- Wet sponge spark tester
- Test coatings up to 12 mil (300 micron)
- Used in accordance with AS 3894-2 Standard for coatings less than 10 mil (250 micron) thick
- Audible pinhole-detection alarm
- Powered by three AA batteries
- Kit includes detector probe unit, earth lead with alligator clip and instructions
-
INDLPDKITCAVAILABLE FOR RENTAL OR PURCHASE
- Wet sponge spark tester for metal and concrete substrates
- Test coatings up to 20 mil
- Has visual reassurance that the instrument is properly grounded
- Calibration Certificate shows traceability to NIST (Long Form) Included
- Two Year Warranty
- Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
- Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8" x 8" Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2' of reach, universal adapters to extend existing paint rollers and poles, 40' of ground wire, 15' of hot wire, and magnetic grounding post
INDLPDKITCAVAILABLE FOR RENTAL OR PURCHASE- Wet sponge spark tester for metal and concrete substrates
- Test coatings up to 20 mil
- Has visual reassurance that the instrument is properly grounded
- Calibration Certificate shows traceability to NIST (Long Form) Included
- Two Year Warranty
- Conforms to ISO 14654, ISO8289-A, ASTM G62, G6, D5162, BS7792-2, NACE TM0384, SP0188, AS3894.2, JIS K 6766
- Complete Kit Includes: All the contents from the Basic Kit, As well as: Roller Sponge, Internal Diameter Sponge, additional 8" x 8" Sheet sponge for custom jobs, Wetting Agent, Extension rods for an additional 2' of reach, universal adapters to extend existing paint rollers and poles, 40' of ground wire, 15' of hot wire, and magnetic grounding post
-
INDHHDWAND
- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc.
These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces. Additional information is as follows:
- Multiple sizes available between 2 - 48" wide (51 to 1219 mm)
- Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do. Each brush is supplied ready-to-use.
- Sold individually.
-
BlastOne offers all instruments and accessories from the DeFelsko product line.
These rolling springs are the electrodes suited for DeFelsko® high voltage holiday detection on steel pipes, and additional information is as follows:
- Multiple sizes available, 4-36"
- Each electrode includes two pre-installed spring couplers. Replacement couplers are available in packs of 2.
- Requires one Spring Connector to connect either DeFelsko or SPY spring electrodes to PosiTest HHD (sold separately).
- Sold Individually
What is the difference between a holiday detector and a porosity detector?
A holiday detector and a proximity detector are in essence the same thing. An electrical current is run over the painted/coated steel surface and in the event of porosity or pinhole in the coating (also known as a holiday) the current short-circuits to earth and creates an alarm. With high-voltage holiday detectors this can create a spark – hence the name spark tester.
BlastOne has complete range of coating inspection instrumentation, such as digital coating thickness gauge, CTG, ferrous or nonferrous, surface profile meters / surface profile measuring device, testex tape, dew point meters, and magnetic surface thermometers. There are many spark tester manufacturers which make different configurations of spark tester/holiday detectors – depending on the application and the complexity of the surface that requires testing for porosity in the paint coating
High-voltage spark tester is come with different width bristle brushes or rolling spring probes, which can be used on pipelines
Low-voltage sponge detectors and sponge holiday detectors are also available
Paint inspectors should use caution when using high voltage porosity detectors high-voltage holiday detector
It is important that 100% of the coated surface is tested for pinholes using a spark tester. Where ever a pinhole is located, a repair must be conducted in the paint coating – To ensure long coating life and and low maintenance
Most Holiday Detectors have Regulated direct current pulse voltage outputs
What voltage should I use for holiday detection/pinhole detection on my paint coating?
To determine which voltage I need to use on my spark tester, it is important to refer to the paint coating spec sheet and the relevant standards applicable to high-voltage porosity detection
Protective coatings are used to prevent corrosion on structural steel surfaces, but areas of thin or compromised coatings may not be immediately visible to the naked eye. These defects in the applied coating, known as pinholes or holidays, can adversely affect the longevity of the protective coating.
BlastOne’s offering of pinhole detection instruments are reliable tools in ensuring the quality of the applied coating. The instruments conform to all major industry standards, including NACE, ISO, ASTM, and ACA, for pinhole/holiday detection.
Additionally, the instruments are easy and safe to use and are designed to be easily adapted to measure surface of various shapes and sizes. Various kits and modular tools are also available, allowing the tools to adapt to any application.