Replacement Item Instruments
Showing 1–15 of 63 results
-
INDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUPINDSSTCUPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water is measured before injecting under the patch. These 30 ml Graduated Cups offer a convenient way to measure the water and are available in packs of 10. MPN: SSTCUP
-
INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3INDSSTSYRINGE3BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment syringes are available as replacements in this convenient package of 10 units. The plastic or metal needles are available separately depending on which test patch system is used. MPN: SSTSYRINGE3
-
INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.
-
INDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIPINDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIP
-
The Testex tape process of measuring surface profile has been used for over 50 years. It is a simple, reliable, and repeatable way of determining surface profile parameters. DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors. DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging. NOTE - the profile ranges are not entirely the same between them - their respective ranges are shown under the Product Description tab. Tape options include the following:
- Conventional Testex Press-O-Film Tape grades.
- Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
- Optical Grade Testex Press-O-Film Tape Grades
- Use with PosiTector RTR 3D probe. Provides surface data files (.sdf) that allow both 2D and 3D measurements.
- Conventional Testex Press-O-Film Tape grades.
-
INDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIPINDBELTCLIPBlastOne offers all DeFelsko testing instruments and accessories on-line for easy ordering. This Belt Clip accessory services the PosiTector 6000 and many other variations. (See description tab for complete list.) MPN: BELTCLIP
-
Each DeFelsko instrument family is factory calibrated and is designed to be ready-to-use upon arrival. Best practice and specifications determine when instruments should have their calibrations rechecked. For the PosiTector UTG probes, DeFelsko offers five different variations of stainless steel Step Blocks that are factory certified for checking their calibration, as follows:
- B1. Standard range Imperial. Five steps (100, 200, 300, 400, and 500 mils).
- B1M. Standard range Metric. Five Steps (2.5, 5, 7.5, 10, and 12.5 mm).
- B2. High range Imperial. Eight steps (1", 1.5", 2", 2.5", 3", 3.5", 4", and 4.5").
- B2M. High range Metric. Eight steps (25, 37.5, 50, 62.5, 75, 87.5, 100, and 112.5 mm).
- P. (Use with PosiTector UTG P probe.) Imperial labeled at 40, 60, 80, and 100 mils. (Metric equivalent 1, 1.5, 2, and 2.5 mm)
-
The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards. The DeFelsko SST test probe is an easy and accurate way to conduct these tests. Test patches are required to perform them and DeFelsko has multiple options, as follows:
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
- Rigid ring. Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
- Flexible ring. Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
- Saves time and money vs. disposable patches.
- Utilizes a plastic needle - no sharp hypodermic needles required!
- Latex Disposable. The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
- Latex-Free Disposable. Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.
- PosiPatch™. This innovative product utilizes a reusable patch, held by a magnetic ring against the surface. Available in 2 configurations:
-
INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.INDRTRTAPEHLDERRecommended best practice when using the PosiTector RTR 3D is to use these specialized Replica Tape Holders. Very easy to use - just affix the replica tape to the holder, and ensure that the compressible foam is located over the hole in the holder. Once adhered, the replica tape can be simply placed into the probe with no concern about migration of the adhesive onto the probe sensors.
-
INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5
-
IND6000PRINTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This printer is compact and portable and is compatible with many DeFelsko PosiTector instruments. Additional details as follows:
- Bluetooth wireless technology for easy data transfer from PosiTector® Advanced models
- Fast print speed of 6mm/s with ink-free thermal paper
- Rechargeable Lithium-Ion battery and universal AC adapter included
- Lightweight and compact design for portability
- One year warranty for peace of mind
- Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS
IND6000PRINTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This printer is compact and portable and is compatible with many DeFelsko PosiTector instruments. Additional details as follows:- Bluetooth wireless technology for easy data transfer from PosiTector® Advanced models
- Fast print speed of 6mm/s with ink-free thermal paper
- Rechargeable Lithium-Ion battery and universal AC adapter included
- Lightweight and compact design for portability
- One year warranty for peace of mind
- Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS
-
INDPAPERBTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls. MPN: PAPERBTINDPAPERBTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This thermal printer paper is compatible with the DeFelsko Bluetooth printer and is packed in convenient boxes of 10 rolls. MPN: PAPERBT
-
Burnishing tools facilitate accurate and easy use of Testex Press-O-Film replica tape. Multiple types available, as follows:
- Stick-type. Economical plastic, sold in packs of 10, these have 8mm round ends. Use with all types of Testex tape.
- Burnishing ball. Designed to use with optical grade tape, for use with the RTR 3D probe.
- High Accuracy tool. Updated with a spring-loaded ball for the most consistent results. Use with standard Testex tape.