My Account
Painting Parts & Consumables
Showing 16–30 of 57 results
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 16 to 18 inch fan width (XHD8 series).
- In this group, the orifice sizes range from .013 to .067 inches (sizes 813 to 867)
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns. Additional details as follows:- This 7250 PSI Airless Spray Tip group has 18 to 20 inch fan width (XHD9 series).
- In this group, the orifice sizes range from .023 to .039 (sizes 923 to 939)
- Designed to be used with the Graco XHD Tip Guard
- Genuine parts - manufactured by Graco
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
-
- Male threads at both ends
- Carbon steel construction
- Optional stainless steel also available
- Various seal material options for fluid compatibility
- Mount on the high-pressure filter outlets for the control of individual spray lines
- Can be used as a priming-drain valve
- Premium PEEK Seals have more than double the life of Teflon
-
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 6mm
- Male NPT Threaded End 6mm
- Sold Individually
GR155541- Suited for Airless Paint lines and equipment
- Rated to 7,250psi
- High Pressure Steel Plated Elbow
- Female NPT Swivel 6mm
- Male NPT Threaded End 6mm
- Sold Individually
-
The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators. Refresh or expand your PX5 using the filters and cartridges available below:- Pre-Filters. Extend the life of the main filters using these. 10 per pack.
- Spark Arrestor. Essential when using the PX5 in certain applications.
- HEPA Cartridge Filter. The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
- Organic Vapor and Acid Gas Cartridge Filter. (HE/OV/AG.) Label Color Code Yellow/Magenta. The painters favorite. Approved for the following gases:
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas / HE Cartridge Filter. Label Color Code Olive/Magenta. Approved for all the same gases as the OV/AG filter plus the following:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
-
GR243281- Suits RAC 5 or RAC V Spray Tip
- Used to Seal between the Spray Gun and the Tip Orifice
- 4050psi Rated
- Sold as a pack of 5
- Genuine Parts - Manufactured by Graco
GR243281- Suits RAC 5 or RAC V Spray Tip
- Used to Seal between the Spray Gun and the Tip Orifice
- 4050psi Rated
- Sold as a pack of 5
- Genuine Parts - Manufactured by Graco
-
GR224468- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 153mm Long and about 25mm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #100 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
GR224468- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 153mm Long and about 25mm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #100 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
-
GR224458- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 152mm Long and about 25mm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #30 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
GR224458- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 152mm Long and about 25mm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #30 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
-
GR238438- Xtreme Lower Long Filter Screen
- Long Filter Screen #60 mesh (pkt 25)
- Mesh: #60 (6")
GR238438- Xtreme Lower Long Filter Screen
- Long Filter Screen #60 mesh (pkt 25)
- Mesh: #60 (6")
-
GR224459- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 15cm Long and about 2.5cm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #60 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
GR224459- Suits Graco Xtreme and MaxLife Lowers
- Used to filter out any unwanted particles from your paint, so they don't end up in your gun, blocking your spray tip
- Filter Element is 15cm Long and about 2.5cm round
- Use with a Filter Support which is inserted into the middle of the Filter
- #60 mesh
- Sold as a Packet of 2
- Manufactured by Bedford Precision Parts
-
GR245067- Compatible: Graco Triton 4000 and Graco Triton 310
- Ball Check Repair Kit
GR245067- Compatible: Graco Triton 4000 and Graco Triton 310
- Ball Check Repair Kit
-
GR189018- High Pressure Inline Swivel
- Pressure Rating: 7500psi; End: ¼ ; Connector: Female; End: ¼ Male
- Material: Teflon packed
- Common Inline swivel that is used between the Graco spray whip hose and the Graco spray gun
GR189018- High Pressure Inline Swivel
- Pressure Rating: 7500psi; End: ¼ ; Connector: Female; End: ¼ Male
- Material: Teflon packed
- Common Inline swivel that is used between the Graco spray whip hose and the Graco spray gun
-
-
GR287032- 60# mesh coating spray gun filter for in handle filter units
- #60 Mesh Gun Filter
- Series II Guns
GR287032- 60# mesh coating spray gun filter for in handle filter units
- #60 Mesh Gun Filter
- Series II Guns
