Home / Protective Work Gloves | Blasters & Painters

Blasting and Painting Gloves Buying Guide

This page will introduce you to our line of standard, high performance, and specialty protective work gloves.

Safety and comfort are key factors determining the productivity and morale of your crew. Quality PPE not only thwarts injury, but should promote capability.

Should you have a special application and need advice, please don’t hesitate to reach out to our customer service.

Home / Protective Work Gloves Buying Guide

Chemical Resistant & Disposable Gloves

Name	Sizes	Best Scenarios	Benefits	Potential Concerns	Also Known As
WHITE LLDPE LAMINATED CHEMICAL / SOLVENT RESISTANT GLOVE	S/M/L/XL/XXL (7-11)	Extended MEK use. Testing applications. Chemical and Life Sciences applications.	Protects against the widest range of chemicals and ketones of any glove type. Virus protection.	Little cut or abrasion protection. Poor fitting. Can be worn under another glove to increase dexterity or to extend glove life where mechanical hazards are also present. Correct sizing is important for protection.	Barrier®, AlphaTec® 02-100
BUTYL POLYMER CHEMICAL / SOLVENT RESISTANT GLOVE	M/L/XL (8-10)	Extended MEK use. Testing applications. Chemical handling and many industrial applications.	Protects against a wide range of chemicals and ketones. Good fit and dexterity with ANSI 3 abrasion rating.	Expensive. Limited protection against gasoline and other hydrocarbons.	ChemTek®, AlphaTec® 38-514
NITRILE GLOVES	XS/S/M/L/XL/XXL (6-11)	General purpose basic chemical protection for use when handling metal parts, janitorial and food service.	Protects against oils, greases, some acids and bases. Flock lined. Good fit and dexterity with ANSI 4 abrasion rating. Good for those with latex sensitivity. Inexpensive.	Not recommended for MEK, other ketones, benzenes or acetone.	Solvex®, AlphaTec® 37-175
NEOPRENE / RUBBER CHEMICAL-RESISTANT GLOVE, YELLOW / BLUE	S/M/L/XL (7-10)	General purpose basic chemical protection when handling metal parts, and for janitorial & equipment service.	Protects against acids, bases, and alcohols. Flock lined. Diamond-pattern finish to improve grip. Good mechanical protection. Inexpensive.	Not recommended for MEK, gasoline and other hydrocarbons. Can cause allergic reaction in persons with latex sensitivity.	Chemi-Pro, AlphaTec® 87-224
THICKSTER LATEX 14 MIL DISPOSABLE GLOVES	M/L/XL/XXL	General purpose including janitorial, plumbing, painting, some chemicals and automotive.	Premium heavy gauge disposable protection. Extra long (12″) and fully textured for superior grip.	Does not protect against all chemicals. Can cause allergic reaction in persons with latex sensitivity.
DISPOSABLE NITRILE 6-MIL GLOVES	L/XL	Food service Assembly Painting Janitorial Asbestos removal	6-mil, comes 100 ambidextrous gloves per box. Designed for enhanced grip and durability.	Not recommended for MEK, other ketones, benzenes or acetone.


Name	WHITE LLDPE LAMINATED CHEMICAL / SOLVENT RESISTANT GLOVE	BUTYL POLYMER CHEMICAL / SOLVENT RESISTANT GLOVE	NITRILE GLOVES	NEOPRENE / RUBBER CHEMICAL-RESISTANT GLOVE, YELLOW / BLUE	THICKSTER LATEX 14 MIL DISPOSABLE GLOVES	DISPOSABLE NITRILE 6-MIL GLOVES
Sizes	S/M/L/XL/XXL (7-11)	M/L/XL (8-10)	XS/S/M/L/XL/XXL (6-11)	S/M/L/XL (7-10)	M/L/XL/XXL	L/XL
Best Scenarios	Extended MEK use. Testing applications. Chemical and Life Sciences applications.	Extended MEK use. Testing applications. Chemical handling and many industrial applications.	General purpose basic chemical protection for use when handling metal parts, janitorial and food service.	General purpose basic chemical protection when handling metal parts, and for janitorial & equipment service.	General purpose including janitorial, plumbing, painting, some chemicals and automotive.	Food service Assembly Painting Janitorial Asbestos removal
Benefits	Protects against the widest range of chemicals and ketones of any glove type. Virus protection.	Protects against a wide range of chemicals and ketones. Good fit and dexterity with ANSI 3 abrasion rating.	Protects against oils, greases, some acids and bases. Flock lined. Good fit and dexterity with ANSI 4 abrasion rating. Good for those with latex sensitivity. Inexpensive.	Protects against acids, bases, and alcohols. Flock lined. Diamond-pattern finish to improve grip. Good mechanical protection. Inexpensive.	Premium heavy gauge disposable protection. Extra long (12″) and fully textured for superior grip.	6-mil, comes 100 ambidextrous gloves per box. Designed for enhanced grip and durability.
Potential Concerns	Little cut or abrasion protection. Poor fitting. Can be worn under another glove to increase dexterity or to extend glove life where mechanical hazards are also present. Correct sizing is important for protection.	Expensive. Limited protection against gasoline and other hydrocarbons.	Not recommended for MEK, other ketones, benzenes or acetone.	Not recommended for MEK, gasoline and other hydrocarbons. Can cause allergic reaction to persons with latex sensitivity.	Does not protect against all chemicals. Can cause allergic reaction in persons with latex sensitivity.	Not recommended for MEK, other ketones, benzenes or acetone.
Also Known As	Barrier®, AlphaTec® 02-100	ChemTek®, AlphaTec® 38-514	Solvex®, AlphaTec® 37-175	Chemi-Pro, AlphaTec® 87-224

Leather Gloves

Name	Sizes	Cut Rating	Best Scenarios	Benefits
BLASTERALL PREMIUM LEATHER BLASTING GLOVES	XS/S/M/L/XL/XXL	ANSI Cut Level 4	Abrasive blasting Heavy construction General industrial applications	Comfortable, supple full-grain cowhide. Wide gauntlet fits over end of blast suit sleeve. Classy and comfortable with good cut protection due to its Kevlar® lining. Touch screen fingertip.
BLASTERALL LEATHER RIGGER GLOVES	XS/S/M/L/XL/XXL	ANSI Cut Level 5	Abrasive blasting Heavy construction General industrial applications	Premium, supple full-grain cowhide with reinforced palms and elasticated wrist. Same as our BlasterAll Blasting glove but without the gauntlet and with a higher cut rating.
GREY SUEDE LEATHER WORK GLOVES	One Size	Not Rated	Welding and construction applications where extra length is needed.	Split-grain unlined cowhide protects against sparks, spatter, and general industrial hazards.
GOATSKIN DRIVER GLOVES	S/M/L/XL/XXL	Not Rated	Material handling Light construction Low-hazard site cleanup	Economical protection against scuffs and scrapes. Unlined with soft interior and elasticated wrist for all-day comfort.
BULLARD HEAVY DUTY BLAST GLOVES	M/L/ XL/XXL	Not Rated	Abrasive blasting Heavy construction General industrial applications	Full-Grain leather (unlined) Wide gauntlet fits over end of blast suit sleeve Stylish gray leather with brown palm reinforcement


Name	BLASTERALL PREMIUM LEATHER BLASTING GLOVES	BLASTERALL LEATHER RIGGER GLOVES	GREY SUEDE LEATHER WORK GLOVES	GOATSKIN DRIVER GLOVES	BULLARD HEAVY DUTY BLAST GLOVES
Sizes	XS/S/M/L/XL/XXL	XS/S/M/L/XL/XXL	One Size	S/M/L/XL/XXL	M/L/XL/XXL
Cut Rating	ANSI Cut Level 4	ANSI Cut Level 5	Not Rated	Not Rated	Not Rated
Best Scenarios	Abrasive blasting Heavy construction General industrial applications	Abrasive blasting Heavy construction General industrial applications	Welding and construction applications where extra length is needed	Material handling Light construction Low-hazard site cleanup	Abrasive blasting Heavy construction General industrial applications
Benefits	Comfortable, supple full-grain cowhide. Wide gauntlet fits over end of blast suit sleeve. Classy and comfortable with good cut protection due to its Kevlar® lining. Touch screen fingertip.	Premium, supple full-grain cowhide with reinforced palms and elasticated wrist. Same as our BlasterAll Blasting glove but without the gauntlet and with a higher cut rating.	Split-grain unlined cowhide protects against sparks, spatter, and general industrial hazards.	Economical protection against scuffs and scrapes. Unlined with soft interior and elasticated wrist for all-day comfort.	Full-Grain leather (unlined) Wide gauntlet fits over end of blast suit sleeve. Stylish gray leather with brown palm reinforcement.

General Industry Gloves

	Name	Sizes	Cut Rating	Best Scenarios	Benefits
	GENERAL PURPOSE KNIT GLOVES W/ MICROFOAM NITRILE PALM	S/M/L/XL/XXL	ANSI 1	Light construction Automotive Aerospace	Comfortable and form fitting. Good grip in both oily and dry surfaces w/minimal liquid penetration. High dexterity and sense of touch.
	CUT RESISTANT KNIT GLOVES W/ MICROFOAM NITRILE PALM	S/M/L/XL/XXL	ANSI 6	Light construction General handling Glass handling Sheet metal, manufacturing	Comfortable and form fitting. Good grip in both oily and dry surfaces with high level of cut resistance. High dexterity and sense of touch.
	ELASTIC CUFF PAINTING GLOVES	ONE SIZE	None	Warehousing Parts handling Farming	General construction Industrial Material handling Power tool Heavy lifting
	HIGH-VIS SAFETY IMPACT GLOVES	S/M/L/XL/XXL	ANSI 5	General construction Industrial Material handling Power tool Heavy lifting	Sandy nitrile palm and HPPE construction provides strong grip in dry and wet environments. Cut Level 5 Impact Level 2 Puncture Level 5 Abrasion Level 5
$MASTERGRIP BLUE-DIP LATEX KNIT GLOVES$	MASTERGRIP BLUE-DIP LATEX GLOVES	M/L/XL	None	Light construction including drywall, tile, and roofing installation	Economical. Microfoam dip finish for extra gripping.

					$Mastergrip Blue-Dip Latex Painting Gloves$
Name	GENERAL PURPOSE KNIT GLOVES W/ MICROFOAM NITRILE PALM	CUT RESISTANT KNIT GLOVES W/ MICROFOAM NITRILE PALM	COTTON DRILL GLOVES	HIGH-VIS SAFETY IMPACT GLOVES	MASTERGRIP BLUE-DIP LATEX GLOVES
Sizes	S/M/L/XL/XXL	S/M/L/XL/XXL	ONE SIZE	S/M/L/XL/XXL	M/L/XL
Cut Rating	ANSI 1	ANSI 6	None	ANSI 5	None
Best Scenarios	Light construction, automotive, aerospace	Light construction, general handling, glass handling, sheet metal, manufacturing	Warehousing, parts handling, farming.	General construction, industrial, material handling, power tool, heavy lifting.	Light construction including drywall, tile, and roofing installation
Benefits	Comfortable and form fitting. Good grip in both oily and dry surfaces w/minimal liquid penetration. High dexterity and sense of touch.	Comfortable and form fitting. Good grip in both oily and dry surfaces with high level of cut resistance. High dexterity and sense of touch.	Knit wrist to keep dirt and debris from entering the glove. Roomy fit. PVC dotted palm for improved grip.	Sandy nitrile palm and HPPE construction provides strong grip in dry and wet environments. Cut Level 5, Impact Level 2, Puncture Level 5, Abrasion Level 5.	Economical. Microfoam dip finish for extra gripping.

Frequently Asked Questions

What are cut ratings and how do they determine the level of protection a glove offers?
Cut ratings indicate the glove’s resistance to cutting hazards. The higher the rating, the more protection the glove provides against cuts. Different regions have different standards for cut ratings. Here’s a brief overview of the most common standards:

________________________

EN 388 (European Standard)

This standard uses both the “Coup Test” and the “TDM Test” for gloves manufactured after 2016.

Ratings are represented by a series of four (or more) numbers (e.g., 4X43C). The third number (or letter X if not tested) represents the Coup Test result, while the last character (a letter from A to F) represents the TDM Test result, with A being the lowest and F the highest cut resistance. For the EN 388 and ISO 13997 standards, the cut rating goes up to F.

________________________

ANSI/ISEA 105 (American Standard)

This standard uses the “ASTM F2992-15 Test” and rates gloves from A1 (lowest) to A9 (highest) based on their cut resistance.

A1 gloves can withstand weights of 200-499 grams, while A9 gloves can withstand weights of 6000+ grams.

ISO 13997 (International Standard) For the ANSI/ISEA 105 standard, the cut rating goes up to A9.

________________________

It’s essential to understand the specific standard referenced when looking at glove cut ratings to ensure you’re getting the appropriate level of protection.
How do I choose the right glove for handling chemicals?
It’s essential to refer to the glove’s chemical resistance chart, which lists the chemicals the glove is tested against and its resistance level. This link will give provide a reasonable guide for 4 different glove materials. However, please consult mfg specifications when in doubt.
What's the difference between latex, nitrile, and vinyl gloves in terms of chemical protection?
- Latex gloves offer good protection against many acids and bases but may degrade with some organic solvents.
- Nitrile gloves provide excellent resistance to a wide range of chemicals, including oils and solvents.
- Vinyl gloves are less resistant to chemicals than latex or nitrile but are often used for low-risk tasks.
Can one pair of gloves protect against both cuts and chemicals?
Some gloves are designed to offer multi-hazard protection. However, it’s crucial to ensure that the specific glove chosen meets the required standards for both cut resistance and chemical protection.
Are there specific gloves for handling hot or cold objects in construction?
Yes, there are thermal gloves designed for extreme temperatures. Ensure the glove you choose is rated for the specific temperature range you’ll be working in.
What does ``dexterity`` mean when referring to work gloves?
Dexterity refers to how easily you can move your fingers and handle objects while wearing the gloves. Higher dexterity means you can perform more intricate tasks without removing the gloves.
Can I wash and reuse my work gloves?
Some gloves are designed to be washable, while others are not. Always check the manufacturer’s instructions. Washing can sometimes degrade the protective qualities of the glove.
What's the difference between coated and uncoated gloves?
Coated gloves have a layer of material (like nitrile or latex) on the palm and fingers, enhancing grip and offering additional protection. Uncoated gloves do not have this layer and might offer more breathability.

Related Equipment

Crocodile-Cloth-Power-Scrub-WDCCPS80-imgholddd

CROCODILE® CLOTH HEAVY DUTY WIPES

painting-coveralls-full_PPE_PainterAlls_disposable-imgholdd

PAINTERALLS DISPOSABLE PAINT OVERALLS

nkSPR451-Elipse-P100-ready-use-Mask-with-replaceable-filters-small-imgholddd

GVS ELIPSE LOW-PROFILE HALF MASK RESPIRATORS

rpb-t-link-painting-respirator-hood_HAT1711112S-imgholddd-1

RPB T-LINK RESPIRATOR

Shop

Contact BlastOne

We love to talk to customers and help them make the best decisions when purchasing equipment.
You can reach us via our Live Chat, Email, Phone, and Online Form.